RG3216P-9530-B-T5 Equivalent & Substitute Parts

Part Overview

The RG3216P-9530-B-T5 is a 953 Ohms ±0.1% thin film chip resistor manufactured by Susumu in a 1206 (3216 Metric) surface mount package. This component is rated for 0.25W (1/4W) power dissipation and features anti-sulfur coating with automotive AEC-Q200 qualification. The part is active in production with 922 units currently in stock. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance certifications align with the original component, enabling direct replacement in circuit applications without design modification.

Substiute Parts

RG3216P-9530-B-T5

SusumuIn Stock: 999RG3216P-9530-B-T5 Datasheet

Current PartRFQ

ERA-8AEB9530V

Panasonic Electronic ComponentsIn Stock: 2716ERA-8AEB9530V Datasheet

DirectRFQ

RT1206BRD07953RL

YAGEOIn Stock: 3085RT1206BRD07953RL Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RG3216P-9530-B-T5 is determined by strict alignment of the following parameters:

Primary Electrical Parameters:

• Resistance value: 953 Ohms
• Tolerance: ±0.1%
• Power rating: 0.25W (1/4W)
• Composition: Thin Film
• Temperature coefficient: ±25ppm/°C
• Operating temperature range: -55°C ~ 155°C

Mechanical Parameters:

• Package type: 1206 (3216 Metric)
• Number of terminations: 2
• Packaging format: Tape & Reel (TR)

Compliance Parameters:

• RoHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Unaffected
• ECCN: EAR99

The identified substitute parts ERA-8AEB9530V (Panasonic Electronic Components) and RT1206BRD07953RL (YAGEO) meet all primary electrical specifications and mechanical package requirements. Both parts are active in production, RoHS3 compliant, and rated for identical operating conditions. Dimensional variations in height and length fall within acceptable tolerances for 1206 package specifications and do not affect circuit performance or PCB assembly compatibility.

Parameter Comparison

Engineering Selection Recommendations

All three parts—RG3216P-9530-B-T5, ERA-8AEB9530V, and RT1206BRD07953RL—are active production components with identical electrical specifications and full compliance with RoHS3 and REACH regulations. Selection between these parts is based on availability and supply chain requirements rather than technical performance differences.

RG3216P-9530-B-T5 (Susumu): Features anti-sulfur coating and explicit AEC-Q200 automotive qualification. Current inventory: 922 units.

ERA-8AEB9530V (Panasonic Electronic Components): Carries AEC-Q200 automotive qualification. Current inventory: 2657 units. Higher stock availability supports extended production runs.

RT1206BRD07953RL (YAGEO): Meets all electrical and mechanical specifications without explicit automotive feature designation. Current inventory: 3032 units. Highest stock availability.

All parts are suitable for direct substitution in applications requiring 953 Ohm ±0.1% thin film resistors in 1206 package format. Dimensional height variations (0.50mm, 0.70mm, 0.65mm) are within standard 1206 package tolerances and do not affect PCB assembly or circuit performance.

Frequently Asked Questions (FAQ)

Q: Can ERA-8AEB9530V replace RG3216P-9530-B-T5 in automotive applications?

A: Yes. Both parts carry AEC-Q200 automotive qualification and meet identical electrical specifications (953 Ohms ±0.1%, 0.25W, ±25ppm/°C, -55°C ~ 155°C operating range). Both are RoHS3 compliant and REACH unaffected. Direct substitution is valid for automotive circuit applications.

Q: What is the difference between the three parts?

A: All three parts share identical electrical specifications and package type (1206). The primary differences are manufacturer identity and physical height: RG3216P-9530-B-T5 (0.50mm), ERA-8AEB9530V (0.70mm), and RT1206BRD07953RL (0.65mm). These height variations are within standard 1206 package tolerances and do not affect circuit function or PCB assembly compatibility.

Q: Is RT1206BRD07953RL suitable for automotive applications?

A: RT1206BRD07953RL meets all electrical and mechanical specifications required for automotive use (953 Ohms ±0.1%, 0.25W, ±25ppm/°C, -55°C ~ 155°C). However, this part does not carry explicit AEC-Q200 designation. For applications requiring formal automotive qualification, ERA-8AEB9530V or RG3216P-9530-B-T5 are preferred.

Q: Are all three parts available in Tape & Reel packaging?

A: Yes. All three parts are supplied in Tape & Reel (TR) format, suitable for automated assembly processes.

Q: Do these parts have moisture sensitivity concerns?

A: No. All three parts are rated Moisture Sensitivity Level 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.

Q: Can I use these parts interchangeably on the same PCB?

A: Yes. All three parts are mechanically and electrically compatible for direct substitution. The 1206 package footprint is identical across all manufacturers. Height variations fall within standard package tolerances and do not affect PCB layout or assembly.

Q: Which part should I select for new designs?

A: Selection depends on application requirements and supply availability. For automotive applications requiring formal AEC-Q200 qualification, choose ERA-8AEB9530V or RG3216P-9530-B-T5. For general industrial applications, RT1206BRD07953RL offers equivalent electrical performance with higher stock availability.