RG3216P-8872-B-T5 Equivalent & Substitute Parts

Part Overview

The RG3216P-8872-B-T5 is an 88.7 kOhms ±0.1% thin film chip resistor manufactured by Susumu in a 1206 (3216 Metric) surface mount package. This component is rated for 0.25W (1/4W) power dissipation and features anti-sulfur coating with automotive AEC-Q200 qualification. The part operates across a temperature range of -55°C to 155°C with a temperature coefficient of ±25ppm/°C. This resistor is suitable for precision applications requiring high tolerance and automotive-grade reliability. Substitute parts are identified to provide alternative sourcing options while maintaining electrical and mechanical compatibility.

Substiute Parts

RG3216P-8872-B-T5

SusumuIn Stock: 1089RG3216P-8872-B-T5 Datasheet

Current PartRFQ

ERA-8AEB8872V

Panasonic Electronic ComponentsIn Stock: 5924ERA-8AEB8872V Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RG3216P-8872-B-T5 is determined by strict equivalence across the following critical parameters:

• Resistance Value: 88.7 kOhms (exact match required)
• Tolerance: ±0.1% (precision specification)
• Power Rating: 0.25W (1/4W)
• Package: 1206 (3216 Metric) surface mount
• Composition: Thin film construction
• Temperature Coefficient: ±25ppm/°C
• Operating Temperature Range: -55°C to 155°C
• Automotive Compliance: AEC-Q200 qualification
• RoHS Compliance: ROHS3 Compliant
• Moisture Sensitivity: MSL 1 (Unlimited)

The ERA-8AEB8872V from Panasonic Electronic Components meets all specified electrical and mechanical parameters and qualifies as a direct substitute.

Parameter Comparison

Engineering Selection Recommendations

Both the RG3216P-8872-B-T5 and ERA-8AEB8872V are active products with identical electrical specifications and automotive AEC-Q200 qualification. The components are functionally interchangeable for applications requiring 88.7 kOhms ±0.1% precision resistors in 1206 package format.

The primary difference between the two parts is the seated height: the Susumu RG3216P-8872-B-T5 has a maximum seated height of 0.020" (0.50mm), while the Panasonic ERA-8AEB8872V has a maximum seated height of 0.028" (0.70mm). This height differential must be evaluated against specific PCB layout and clearance requirements.

Both parts are ROHS3 compliant, carry MSL 1 (Unlimited) moisture sensitivity rating, and are available in Tape & Reel packaging. Selection between these parts should be based on availability, lead time, cost considerations, and physical clearance constraints in the target application.

Frequently Asked Questions (FAQ)

Q: Can the ERA-8AEB8872V replace the RG3216P-8872-B-T5 in all applications?

A: The ERA-8AEB8872V is electrically and mechanically equivalent to the RG3216P-8872-B-T5 across all specified parameters. However, the seated height difference (0.50mm versus 0.70mm) must be verified against PCB layout constraints and component clearance requirements before substitution.

Q: Are both parts suitable for automotive applications?

A: Yes. Both the RG3216P-8872-B-T5 and ERA-8AEB8872V carry AEC-Q200 automotive qualification and are suitable for automotive-grade applications.

Q: What is the significance of the ±0.1% tolerance specification?

A: The ±0.1% tolerance indicates high-precision thin film construction. This tight tolerance is critical for applications requiring accurate resistance values and is maintained by both the Susumu and Panasonic parts.

Q: Do both parts have the same temperature coefficient?

A: Yes. Both parts have a temperature coefficient of ±25ppm/°C and operate across the identical temperature range of -55°C to 155°C.

Q: Are there any differences in RoHS or environmental compliance?

A: No. Both parts are ROHS3 compliant, carry MSL 1 (Unlimited) moisture sensitivity rating, and are REACH Unaffected.

Q: What packaging formats are available for these parts?

A: Both the RG3216P-8872-B-T5 and ERA-8AEB8872V are supplied in Tape & Reel (TR) packaging suitable for automated assembly processes.

Q: How do the physical dimensions compare?

A: Both parts share identical length and width dimensions of 0.126" L x 0.063" W (3.20mm x 1.60mm). The seated height differs: RG3216P-8872-B-T5 is 0.020" (0.50mm) maximum, while ERA-8AEB8872V is 0.028" (0.70mm) maximum.