RG3216P-5761-D-T5 Equivalent & Substitute Parts

Part Overview

The RG3216P-5761-D-T5 is a 5.76 kOhms ±0.5% thin film chip resistor manufactured by Susumu in 1206 (3216 Metric) package format. This component is rated for 0.25W (1/4W) power dissipation and features anti-sulfur coating with automotive AEC-Q200 qualification. The part is active in production with 1,093 pieces currently in stock. Substitute parts are identified when equivalent electrical and mechanical specifications are met while maintaining compliance with automotive and environmental standards.

Substiute Parts

RG3216P-5761-D-T5

SusumuIn Stock: 1137RG3216P-5761-D-T5 Datasheet

Current PartRFQ

ERA-8AEB5761V

Panasonic Electronic ComponentsIn Stock: 4318ERA-8AEB5761V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RG3216P-5761-D-T5 is determined by strict equivalence across the following critical parameters:

Electrical Equivalence Requirements:

• Resistance value must be 5.76 kOhms
• Power rating must be 0.25W (1/4W) or greater
• Composition must be thin film
• Temperature coefficient must be ±25ppm/°C or better
• Operating temperature range must encompass -55°C ~ 155°C

Mechanical Equivalence Requirements:

• Package format must be 1206 (3216 Metric)
• Physical dimensions must be compatible with 1206 footprint specifications

Compliance Requirements:

• AEC-Q200 automotive qualification required
• ROHS3 compliance required
• Moisture Sensitivity Level must be MSL 1 or better

Tolerance Consideration: Substitute parts with tolerance of ±0.1% or better meet or exceed the ±0.5% specification of the main part and are acceptable for direct substitution.

Parameter Comparison

Engineering Selection Recommendations

The ERA-8AEB5761V from Panasonic Electronic Components is a direct substitute for the RG3216P-5761-D-T5. Both components meet identical electrical specifications for resistance value, power rating, temperature coefficient, and operating temperature range. Both are qualified to AEC-Q200 automotive standards and comply with ROHS3 environmental requirements.

The ERA-8AEB5761V provides improved tolerance performance at ±0.1% compared to the ±0.5% specification of the main part, making it suitable for applications requiring tighter resistance accuracy. The seated height difference of 0.008" (0.20mm) remains within standard 1206 package tolerances and does not affect PCB assembly compatibility.

Both components are active products with established supply chains. Selection between these parts should be based on availability, lead time, and cost considerations, as electrical and mechanical performance are equivalent.

Frequently Asked Questions (FAQ)

Q: Can the ERA-8AEB5761V replace the RG3216P-5761-D-T5 in automotive applications?

A: Yes. Both components carry AEC-Q200 automotive qualification and meet identical electrical specifications for resistance, power rating, temperature coefficient, and operating temperature range. The ERA-8AEB5761V is a direct substitute for automotive use.

Q: Does the tolerance difference affect substitution?

A: No. The ERA-8AEB5761V tolerance of ±0.1% exceeds the RG3216P-5761-D-T5 specification of ±0.5%, providing equal or better performance. Tighter tolerance does not create compatibility issues.

Q: Are there package compatibility concerns?

A: No. Both components use the 1206 (3216 Metric) package format with identical footprint dimensions of 0.126" L x 0.063" W (3.20mm x 1.60mm). The seated height difference of 0.008" (0.20mm) is within standard 1206 package tolerances and does not affect PCB assembly.

Q: Do both parts meet environmental compliance requirements?

A: Yes. Both the RG3216P-5761-D-T5 and ERA-8AEB5761V are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating. Both are REACH unaffected and classified as EAR99 for export control purposes.

Q: What is the primary difference between these two parts?

A: The primary difference is the tolerance specification. The ERA-8AEB5761V provides ±0.1% tolerance compared to the ±0.5% tolerance of the RG3216P-5761-D-T5. The Panasonic part also lacks the anti-sulfur coating feature of the Susumu part, though both meet AEC-Q200 automotive standards.

Q: Can these parts be used interchangeably in the same circuit?

A: Yes. Electrical and mechanical specifications are equivalent. Both components operate across the same temperature range, have identical power ratings, and meet the same automotive qualification standards. Direct substitution is supported.