RG3216P-4872-B-T5 Equivalent & Substitute Parts

Part Overview

The RG3216P-4872-B-T5 is a 48.7 kOhms ±0.1% thin film chip resistor manufactured by Susumu in 1206 (3216 Metric) package format with 0.25W power rating. This component is designed for automotive applications and carries AEC-Q200 qualification with anti-sulfur coating. The part is actively produced and available in high volume inventory. Substitute parts are identified for applications requiring equivalent electrical and mechanical performance, alternative sourcing, or inventory optimization.

Substiute Parts

RG3216P-4872-B-T5

SusumuIn Stock: 1204RG3216P-4872-B-T5 Datasheet

Current PartRFQ

ERA-8AEB4872V

Panasonic Electronic ComponentsIn Stock: 6672ERA-8AEB4872V Datasheet

DirectRFQ

RT1206BRD0748K7L

YAGEOIn Stock: 1887RT1206BRD0748K7L Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RG3216P-4872-B-T5 are qualified based on the following electrical and mechanical parameters:

Electrical Equivalence Criteria:

• Resistance value: 48.7 kOhms
• Tolerance: ±0.1%
• Power rating: 0.25W (1/4W)
• Temperature coefficient: ±25ppm/°C
• Operating temperature range: -55°C ~ 155°C

Mechanical Equivalence Criteria:

• Package type: 1206 (3216 Metric)
• Number of terminations: 2
• Composition: Thin Film
• Packaging format: Tape & Reel (TR)

Compliance Criteria:

• RoHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Unaffected status

All identified substitute parts meet these core parameters and are suitable for direct replacement in applications requiring 48.7 kOhms ±0.1% thin film resistors in 1206 package format.

Parameter Comparison

Engineering Selection Recommendations

RG3216P-4872-B-T5 (Susumu): Primary selection for automotive applications requiring AEC-Q200 qualification with anti-sulfur coating. Lowest seated height (0.50mm) provides optimal performance in space-constrained PCB layouts. Active production status with 1114 units in stock.

ERA-8AEB4872V (Panasonic): Qualified substitute with AEC-Q200 automotive rating. Highest inventory availability (6650 units) supports high-volume production requirements. Seated height of 0.70mm requires PCB clearance verification for applications with height constraints. Suitable for direct replacement in automotive designs.

RT1206BRD0748K7L (YAGEO): Qualified substitute with thin film composition and full electrical equivalence. Seated height of 0.65mm provides intermediate clearance profile. No explicit automotive rating designation in provided specifications. Suitable for general-purpose applications meeting electrical and mechanical requirements. 1837 units in stock.

All three parts maintain ROHS3 compliance, unlimited moisture sensitivity rating, and identical electrical performance parameters. Selection should prioritize application-specific requirements including PCB height constraints, automotive qualification necessity, and inventory availability.

Frequently Asked Questions (FAQ)

Q: Can ERA-8AEB4872V replace RG3216P-4872-B-T5 in automotive applications?

A: Yes. ERA-8AEB4872V carries AEC-Q200 automotive qualification and meets all electrical and mechanical parameters of RG3216P-4872-B-T5. Both components are thin film 48.7 kOhms ±0.1% resistors in 1206 package with identical operating temperature range and temperature coefficient. PCB layout must accommodate the 0.70mm seated height of the Panasonic part.

Q: What is the primary difference between these three substitute parts?

A: All three parts are electrically equivalent with identical resistance, tolerance, power rating, and temperature characteristics. Physical differences include seated height: RG3216P-4872-B-T5 at 0.50mm, RT1206BRD0748K7L at 0.65mm, and ERA-8AEB4872V at 0.70mm. The Susumu part includes anti-sulfur coating; the Panasonic part carries explicit AEC-Q200 automotive rating.

Q: Is RT1206BRD0748K7L suitable for automotive applications?

A: RT1206BRD0748K7L meets all electrical and mechanical requirements for automotive use. However, the provided specifications do not include explicit AEC-Q200 automotive qualification. Applications requiring automotive qualification should prioritize RG3216P-4872-B-T5 or ERA-8AEB4872V.

Q: Are there package compatibility concerns when substituting these parts?

A: All three parts use 1206 (3216 Metric) package format with identical footprint dimensions. Seated height variations (0.50mm, 0.65mm, 0.70mm) require verification against PCB clearance specifications. Tape & Reel packaging is consistent across all parts.

Q: Do all substitute parts meet RoHS and REACH compliance?

A: Yes. All three parts are ROHS3 Compliant and REACH Unaffected. Moisture Sensitivity Level is 1 (Unlimited) for all parts, indicating no special moisture handling requirements.

Q: What inventory considerations apply to these substitutes?

A: RG3216P-4872-B-T5 has 1114 units in stock, ERA-8AEB4872V has 6650 units, and RT1206BRD0748K7L has 1837 units. ERA-8AEB4872V provides highest availability for high-volume production. All parts are actively produced.