RG3216P-4530-D-T5 Equivalent & Substitute Parts

Part Overview

The RG3216P-4530-D-T5 is a 453 Ohm ±0.5% thin film chip resistor manufactured by Susumu in the 1206 (3216 Metric) package format. This component is rated for 0.25W (1/4W) power dissipation and is designed for automotive applications with AEC-Q200 qualification and anti-sulfur protection. The part is currently active in production with 1031 pieces in stock.

Substitute parts are identified when equivalent electrical performance, mechanical compatibility, and regulatory compliance can be maintained across different manufacturers while meeting or exceeding the original specifications.

Substiute Parts

RG3216P-4530-D-T5

SusumuIn Stock: 1110RG3216P-4530-D-T5 Datasheet

Current PartRFQ

ERA-8AEB4530V

Panasonic Electronic ComponentsIn Stock: 5460ERA-8AEB4530V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RG3216P-4530-D-T5 is determined by the following criteria:

Mandatory Matching Parameters:

• Resistance value: 453 Ohms
• Package format: 1206 (3216 Metric)
• Power rating: 0.25W (1/4W) minimum
• Composition: Thin Film
• Temperature coefficient: ±25ppm/°C
• Operating temperature range: -55°C ~ 155°C minimum
• Automotive rating: AEC-Q200
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity: MSL 1 or better

Allowable Variation:

• Tolerance: Equal to or tighter than ±0.5%
• Height (seated): Variation acceptable within standard PCB assembly tolerances
• Manufacturer: Different manufacturers permitted if all electrical and compliance parameters are met

The ERA-8AEB4530V from Panasonic Electronic Components qualifies as a substitute part because it maintains all mandatory parameters while providing improved tolerance specification (±0.1% versus ±0.5%).

Parameter Comparison

Engineering Selection Recommendations

RG3216P-4530-D-T5 (Susumu) is the primary component specification. This part maintains active production status with AEC-Q200 automotive qualification, ROHS3 compliance, and anti-sulfur protection. The ±0.5% tolerance specification is suitable for general automotive circuit applications.

ERA-8AEB4530V (Panasonic Electronic Components) is a qualified substitute with superior tolerance performance (±0.1%). This part is appropriate for applications requiring tighter resistance tolerance while maintaining identical electrical performance, package compatibility, and automotive compliance. The substitute part carries active production status with 5416 pieces in stock, providing supply continuity.

Both parts are ROHS3 compliant, AEC-Q200 rated, and operate across the identical temperature range of -55°C to 155°C. Selection between these parts depends on tolerance requirements and supply availability rather than functional capability.

Frequently Asked Questions (FAQ)

Q: Can ERA-8AEB4530V be used as a direct replacement for RG3216P-4530-D-T5?

A: Yes. Both parts share identical resistance value (453 Ohms), power rating (0.25W), package format (1206), composition (thin film), temperature coefficient (±25ppm/°C), operating temperature range (-55°C to 155°C), and automotive compliance (AEC-Q200). The ERA-8AEB4530V provides tighter tolerance (±0.1% versus ±0.5%), making it suitable for applications with stricter tolerance requirements.

Q: Are there any physical compatibility concerns between these parts?

A: Both parts use the 1206 (3216 Metric) package with identical length (0.126" / 3.20mm) and width (0.063" / 1.60mm). The seated height differs slightly (0.020" for RG3216P-4530-D-T5 versus 0.028" for ERA-8AEB4530V), but this variation remains within standard PCB assembly tolerances and does not affect mechanical compatibility.

Q: What compliance certifications apply to both parts?

A: Both the RG3216P-4530-D-T5 and ERA-8AEB4530V carry AEC-Q200 automotive qualification, ROHS3 compliance, and MSL 1 (Unlimited) moisture sensitivity rating. Both parts are classified under ECCN EAR99 and HTSUS 8533.21.0030.

Q: Which part should be selected for new designs?

A: Selection depends on tolerance requirements. For applications requiring ±0.5% tolerance, either part is acceptable. For applications requiring tighter tolerance control, the ERA-8AEB4530V (±0.1%) is the appropriate choice. Both parts maintain active production status and are suitable for new automotive circuit designs.

Q: Are these parts interchangeable in existing assemblies?

A: Yes. The identical package format, electrical specifications, and compliance ratings ensure functional interchangeability. No circuit redesign or PCB layout modification is required when substituting between these parts.