RG3216P-4530-B-T5 Equivalent & Substitute Parts

Part Overview

The RG3216P-4530-B-T5 is a 453 Ohm ±0.1% thin film chip resistor manufactured by Susumu in a 1206 (3216 Metric) surface mount package. This component is rated for 0.25W (1/4W) power dissipation and features anti-sulfur coating with automotive AEC-Q200 qualification. The part is supplied in Tape & Reel packaging and maintains an operating temperature range of -55°C to 155°C. Equivalent and substitute parts are identified to provide design flexibility, inventory alternatives, and sourcing options while maintaining electrical and mechanical compatibility.

Substiute Parts

RG3216P-4530-B-T5

SusumuIn Stock: 1059RG3216P-4530-B-T5 Datasheet

Current PartRFQ

RG3216P-4530-B-T1

SusumuIn Stock: 1872RG3216P-4530-B-T1 Datasheet

DirectRFQ

ERA-8AEB4530V

Panasonic Electronic ComponentsIn Stock: 5460ERA-8AEB4530V Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RG3216P-4530-B-T5 is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Resistance value: 453 Ohms
• Tolerance: ±0.1%
• Power rating: 0.25W (1/4W)
• Temperature coefficient: ±25ppm/°C
• Operating temperature range: -55°C ~ 155°C

Mechanical Parameters:

• Package type: 1206 (3216 Metric)
• Number of terminations: 2
• Physical dimensions: 0.126" L x 0.063" W (3.20mm x 1.60mm)

Compliance & Certification:

• Composition: Thin Film
• Automotive rating: AEC-Q200
• RoHS status: ROHS3 Compliant
• Moisture sensitivity level: 1 (Unlimited)

All identified substitute parts meet these criteria. Variations in seated height and specific anti-sulfur feature designation do not affect functional substitutability within the defined electrical and mechanical parameters.

Parameter Comparison

Engineering Selection Recommendations

RG3216P-4530-B-T1 (Susumu)

The RG3216P-4530-B-T1 is a direct equivalent to the RG3216P-4530-B-T5, differing only in packaging designation (T1 versus T5 tape reel specification). Both parts are manufactured by Susumu, share identical electrical specifications, and carry the same AEC-Q200 automotive qualification. The RG3216P-4530-B-T1 maintains the same seated height of 0.020" (0.50mm) and anti-sulfur coating. This part is suitable for direct substitution in all applications where the RG3216P-4530-B-T5 is specified.

ERA-8AEB4530V (Panasonic Electronic Components)

The ERA-8AEB4530V is a cross-manufacturer equivalent manufactured by Panasonic Electronic Components. All electrical parameters, including resistance, tolerance, power rating, temperature coefficient, and operating temperature range, are identical to the main part. The component carries AEC-Q200 automotive qualification and ROHS3 compliance. The seated height is 0.028" (0.70mm), which is 0.008" (0.20mm) greater than the main part. This height difference must be evaluated for applications with strict clearance constraints. The ERA-8AEB4530V is suitable for substitution in standard applications where the increased height does not conflict with board layout or assembly requirements.

Frequently Asked Questions (FAQ)

Q: Can RG3216P-4530-B-T1 be used as a direct replacement for RG3216P-4530-B-T5?

A: Yes. Both parts are manufactured by Susumu with identical electrical and mechanical specifications. The difference in part number designation (T1 versus T5) reflects tape reel packaging specifications only and does not affect component performance or compatibility.

Q: What is the significance of the seated height difference between RG3216P-4530-B-T5 and ERA-8AEB4530V?

A: The RG3216P-4530-B-T5 has a maximum seated height of 0.020" (0.50mm), while the ERA-8AEB4530V has a maximum seated height of 0.028" (0.70mm). This 0.008" (0.20mm) difference must be considered in applications with restricted vertical clearance, such as low-profile assemblies or designs with tight component spacing.

Q: Are all substitute parts AEC-Q200 qualified?

A: Yes. The RG3216P-4530-B-T1 and ERA-8AEB4530V both carry AEC-Q200 automotive qualification, matching the main part specification.

Q: Do all parts meet RoHS3 compliance requirements?

A: Yes. The RG3216P-4530-B-T5, RG3216P-4530-B-T1, and ERA-8AEB4530V are all ROHS3 compliant.

Q: What is the moisture sensitivity level for these parts?

A: All three parts have a Moisture Sensitivity Level (MSL) of 1, indicating unlimited shelf life without moisture control requirements.

Q: Can ERA-8AEB4530V be used in applications requiring anti-sulfur coating?

A: The ERA-8AEB4530V does not explicitly specify anti-sulfur coating in its feature set, unlike the RG3216P-4530-B-T5 and RG3216P-4530-B-T1. Applications requiring confirmed anti-sulfur protection should use the Susumu parts.

Q: Are there any differences in temperature coefficient between the substitute parts?

A: No. All three parts have an identical temperature coefficient of ±25ppm/°C.

Q: What is the operating temperature range for all substitute parts?

A: All parts operate across the same temperature range of -55°C to 155°C.

Q: Can these parts be used interchangeably in automotive applications?

A: Yes, all parts carry AEC-Q200 automotive qualification and are suitable for automotive applications. The seated height difference for ERA-8AEB4530V should be evaluated for specific board design constraints.