RG3216P-3003-C-T5 Equivalent & Substitute Parts

Part Overview

The RG3216P-3003-C-T5 is a 300 kOhms ±0.25% thin film chip resistor in 1206 (3216 Metric) package rated for 0.25W power dissipation. Manufactured by Susumu, this component features anti-sulfur coating and automotive AEC-Q200 qualification, suitable for high-reliability applications in temperature ranges from -55°C to 155°C.

The RG3216P-3003-C-T5 is classified as obsolete. Equivalent and substitute parts are necessary to maintain design continuity, ensure supply chain availability, and support ongoing production requirements for applications currently utilizing this component.

Key Parameters

Parameter	Value
Resistance	300 kOhms
Tolerance	±0.25%
Power Rating	0.25W (1/4W)
Package / Case	1206 (3216 Metric)
Composition	Thin Film
Operating Temperature Range	-55°C ~ 155°C
Temperature Coefficient	±25ppm/°C
Features	Anti-Sulfur, Automotive AEC-Q200
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the RG3216P-3003-C-T5 is determined by the following critical parameters:

Mandatory Compatibility Parameters:

Resistance value: 300 kOhms (exact match required)
Package / Case: 1206 (3216 Metric) (physical and electrical compatibility)
Power rating: 0.25W minimum (equal or higher acceptable)
Composition: Thin Film (electrical characteristics and stability)
Operating temperature range: -55°C ~ 155°C minimum (full range coverage)
RoHS compliance: ROHS3 Compliant (regulatory requirement)

Flexible Parameters (Upgradeable):

Tolerance: ±0.25% or tighter (±0.1%, ±0.05%)
Temperature coefficient: ±25ppm/°C or lower (±10ppm/°C)
Automotive rating: AEC-Q200 (preferred for high-reliability applications)

Substitute parts are categorized as Upgrade when they offer improved tolerance or temperature coefficient specifications while maintaining all mandatory parameters. Direct substitutes match all specifications identically. Similar parts share the package and composition but differ in resistance value or power rating and require circuit validation.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Temp Coeff (ppm/°C)	AEC-Q200	Product Status	Inventory (Pcs)
RG3216P-3003-C-T5	Susumu	300 kOhms	±0.25%	0.25	±25	Yes	Obsolete	837
RG3216N-3003-B-T5	Susumu	300 kOhms	±0.1%	0.25	±10	Yes	Active	1162
RG3216N-3003-W-T1	Susumu	300 kOhms	±0.05%	0.25	±10	Yes	Active	1026
RG3216P-3003-B-T5	Susumu	300 kOhms	±0.1%	0.25	±25	Yes	Active	952
RT1206CRD07300KL	YAGEO	300 kOhms	±0.25%	0.25	±25	No	Active	673
RT1206BRD07300KL	YAGEO	300 kOhms	±0.1%	0.25	±25	No	Active	8900
ERA-8AEB304V	Panasonic Electronic Components	300 kOhms	±0.1%	0.25	±25	Yes	Active	35405
PTN1206E3002BST1	Vishay Dale Thin Film	30 kOhms	±0.1%	0.4	±25	No	Active	1915

Engineering Selection Recommendations

Primary Upgrade Substitutes (Recommended for New Designs):

The RG3216N-3003-B-T5 and RG3216N-3003-W-T1 from Susumu are preferred upgrade substitutes. Both maintain the same manufacturer lineage, package compatibility, and AEC-Q200 automotive qualification as the original part. The RG3216N-3003-B-T5 offers improved tolerance (±0.1%) and reduced temperature coefficient (±10ppm/°C) while remaining in active production status. The RG3216N-3003-W-T1 provides the highest precision tolerance (±0.05%) for applications requiring tighter resistance accuracy.

Secondary Upgrade Substitute:

The RG3216P-3003-B-T5 from Susumu is an active production alternative with improved tolerance (±0.1%) while maintaining the original temperature coefficient specification (±25ppm/°C). This part offers a balance between performance enhancement and specification continuity.

Direct Equivalent (Alternative Manufacturer):

The ERA-8AEB304V from Panasonic Electronic Components is an active production direct equivalent with identical tolerance (±0.1%), power rating (0.25W), and AEC-Q200 automotive qualification. This part provides the highest inventory availability (35,405 pcs) and represents a cross-manufacturer substitute suitable for applications where Susumu supply is constrained.

Specification-Matched Alternative:

The RT1206CRD07300KL from YAGEO matches the original tolerance specification (±0.25%) and temperature coefficient (±25ppm/°C) with active production status. This part is suitable for direct substitution in applications where tolerance and temperature coefficient specifications are critical design parameters.

Not Recommended:

The PTN1206E3002BST1 from Vishay Dale Thin Film is not suitable as a substitute. Although it shares the 1206 package and thin film composition, the resistance value (30 kOhms) differs by one order of magnitude from the required 300 kOhms specification, making it incompatible with the original circuit design.

Frequently Asked Questions (FAQ)

Q: Can the RG3216P-3003-C-T5 be directly replaced with any of the listed substitutes?

A: Direct replacement depends on application requirements. The RT1206CRD07300KL and ERA-8AEB304V match the original tolerance (±0.25% and ±0.1% respectively) and temperature coefficient (±25ppm/°C). The Susumu RG3216N series parts offer improved specifications (tighter tolerance and lower temperature coefficient) and are fully compatible with the 1206 package footprint and electrical requirements.

Q: What is the difference between the RG3216N-3003-B-T5 and RG3216N-3003-W-T1?

A: Both parts are Susumu upgrades with improved temperature coefficient (±10ppm/°C versus the original ±25ppm/°C). The primary difference is tolerance: RG3216N-3003-B-T5 offers ±0.1% tolerance, while RG3216N-3003-W-T1 provides ±0.05% tolerance. Selection depends on circuit accuracy requirements.

Q: Why is the ERA-8AEB304V recommended despite being from a different manufacturer?

A: The ERA-8AEB304V from Panasonic maintains all critical specifications: 300 kOhms resistance, ±0.1% tolerance, 0.25W power rating, 1206 package, AEC-Q200 automotive qualification, and -55°C to 155°C operating range. Additionally, it offers the highest inventory availability (35,405 pcs), ensuring supply chain continuity.

Q: Is the PTN1206E3002BST1 a suitable alternative?

A: No. The PTN1206E3002BST1 has a resistance value of 30 kOhms, which is not equivalent to the required 300 kOhms. This part is not suitable for substitution and would require complete circuit redesign.

Q: What packaging format is available for these substitutes?

A: All recommended substitutes are supplied in Tape & Reel (TR) packaging, which is standard for automated assembly processes. The original RG3216P-3003-C-T5 was supplied in bulk packaging, but all active production alternatives use TR format.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All recommended substitute parts (RG3216N series, RG3216P-3003-B-T5, ERA-8AEB304V, and RT1206CRD07300KL) are ROHS3 compliant and have Moisture Sensitivity Level 1 (Unlimited), matching the original part's environmental compliance status.

Q: Can I use the RT1206BRD07300KL as a substitute?

A: The RT1206BRD07300KL is an upgrade substitute with improved tolerance (±0.1%) and active production status. However, it does not carry AEC-Q200 automotive qualification. Use this part only in applications where automotive qualification is not required.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message