RG3216P-2672-B-T1 Equivalent & Substitute Parts

Part Overview

The RG3216P-2672-B-T1 is a 26.7 kOhms ±0.1% thin film chip resistor manufactured by Susumu in a 1206 (3216 Metric) surface-mount package. This component is rated for 0.25W (1/4W) power dissipation and features anti-sulfur coating with automotive AEC-Q200 qualification. The part is actively produced and available in high volume inventory.

Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance certifications align with the original component, enabling direct replacement in circuit applications without design modification.

Substiute Parts

RG3216P-2672-B-T1

SusumuIn Stock: 905RG3216P-2672-B-T1 Datasheet

Current PartRFQ

ERA-8AEB2672V

Panasonic Electronic ComponentsIn Stock: 6077ERA-8AEB2672V Datasheet

DirectRFQ

RT1206BRD0726K7L

YAGEOIn Stock: 13290RT1206BRD0726K7L Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict alignment of the following parameters:

• Resistance Value: 26.7 kOhms (exact match required)
• Tolerance: ±0.1% (exact match required)
• Power Rating: 0.25W / 1/4W (exact match required)
• Package / Case: 1206 (3216 Metric) (exact match required)
• Composition: Thin Film (exact match required)
• Temperature Coefficient: ±25ppm/°C (exact match required)
• Operating Temperature Range: -55°C ~ 155°C (exact match required)
• RoHS Status: ROHS3 Compliant (exact match required)
• Moisture Sensitivity Level: 1 (Unlimited) (exact match required)

The identified substitute parts meet all critical electrical and mechanical parameters. Physical dimensions and height variations within the 1206 package envelope do not preclude substitution, as these fall within standard manufacturing tolerances for the package classification.

Parameter Comparison

Engineering Selection Recommendations

All three components are actively produced and maintain ROHS3 compliance with unlimited moisture sensitivity rating (MSL 1). Selection between the RG3216P-2672-B-T1, ERA-8AEB2672V, and RT1206BRD0726K7L is based on availability, supply chain requirements, and manufacturer preference.

The RG3216P-2672-B-T1 includes anti-sulfur coating and automotive AEC-Q200 qualification. The ERA-8AEB2672V carries automotive AEC-Q200 qualification without specified anti-sulfur treatment. The RT1206BRD0726K7L does not specify automotive qualification or anti-sulfur features.

For applications requiring automotive-grade reliability, either the RG3216P-2672-B-T1 or ERA-8AEB2672V is appropriate. For general industrial applications, the RT1206BRD0726K7L provides equivalent electrical performance.

Frequently Asked Questions (FAQ)

Q: Can ERA-8AEB2672V replace RG3216P-2672-B-T1 in automotive applications?

A: ERA-8AEB2672V carries AEC-Q200 automotive qualification and matches all critical electrical parameters. It is suitable for automotive applications. The RG3216P-2672-B-T1 includes additional anti-sulfur coating; evaluate application-specific environmental requirements.

Q: Are there physical dimension differences between these parts?

A: All three components use the 1206 (3216 Metric) package. Seated heights vary: RG3216P-2672-B-T1 (0.50mm max), ERA-8AEB2672V (0.70mm max), and RT1206BRD0726K7L (0.65mm max). These variations fall within standard 1206 package tolerances and do not affect PCB layout compatibility.

Q: Does RT1206BRD0726K7L meet automotive requirements?

A: RT1206BRD0726K7L does not carry AEC-Q200 automotive qualification. It is suitable for general industrial and consumer applications where automotive-grade reliability is not required.

Q: What is the significance of the ±0.1% tolerance specification?

A: The ±0.1% tolerance indicates precision thin film construction. All three substitute parts maintain this tolerance, ensuring equivalent accuracy in precision circuit applications such as measurement instrumentation and analog signal conditioning.

Q: Are all parts RoHS3 compliant?

A: Yes. RG3216P-2672-B-T1, ERA-8AEB2672V, and RT1206BRD0726K7L are all ROHS3 compliant with unlimited moisture sensitivity (MSL 1), suitable for standard PCB assembly and storage conditions.