RG3216P-2612-B-T1 Equivalent & Substitute Parts

Part Overview

The RG3216P-2612-B-T1 is a 26.1 kOhms ±0.1% thin film chip resistor manufactured by Susumu in 1206 (3216 Metric) package format. This surface-mount device is rated for 0.25W (1/4W) power dissipation and is designed for automotive applications with AEC-Q200 qualification. The component features anti-sulfur construction and operates across the temperature range of -55°C to 155°C. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and automotive compliance ratings are maintained across alternative manufacturers.

Substiute Parts

RG3216P-2612-B-T1

SusumuIn Stock: 1135RG3216P-2612-B-T1 Datasheet

Current PartRFQ

ERA-8AEB2612V

Panasonic Electronic ComponentsIn Stock: 6496ERA-8AEB2612V Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RG3216P-2612-B-T1 is determined by strict equivalence across the following parameters:

Electrical Specifications:

• Resistance value: 26.1 kOhms
• Tolerance: ±0.1%
• Power rating: 0.25W (1/4W)
• Temperature coefficient: ±25ppm/°C
• Operating temperature range: -55°C to 155°C

Mechanical Specifications:

• Package type: 1206 (3216 Metric)
• Physical dimensions: 0.126" L x 0.063" W (3.20mm x 1.60mm)
• Number of terminations: 2

Compliance & Quality:

• Automotive AEC-Q200 qualification
• ROHS3 compliance
• Thin film composition

The ERA-8AEB2612V from Panasonic Electronic Components meets all electrical and mechanical requirements for direct substitution. Both components share identical resistance, tolerance, power rating, temperature coefficient, operating temperature range, package format, and automotive qualification status.

Parameter Comparison

Engineering Selection Recommendations

Both the RG3216P-2612-B-T1 and ERA-8AEB2612V are active products with full automotive AEC-Q200 qualification and ROHS3 compliance. The components are electrically and mechanically equivalent for circuit applications requiring 26.1 kOhms ±0.1% thin film resistors in 1206 package format.

The primary distinction between these parts is the maximum seated height specification. The RG3216P-2612-B-T1 has a maximum height of 0.020" (0.50mm), while the ERA-8AEB2612V has a maximum height of 0.028" (0.70mm). Component selection should account for PCB layout constraints and clearance requirements in applications with height-sensitive designs.

Both parts maintain identical electrical performance across the full operating temperature range and are suitable for automotive applications requiring precision resistors with low temperature coefficients.

Frequently Asked Questions (FAQ)

Q: Can ERA-8AEB2612V replace RG3216P-2612-B-T1 in automotive applications?

A: Yes. Both components meet AEC-Q200 automotive qualification requirements and share identical electrical specifications including 26.1 kOhms resistance, ±0.1% tolerance, 0.25W power rating, and ±25ppm/°C temperature coefficient. Both operate across -55°C to 155°C and are ROHS3 compliant.

Q: Are there physical compatibility concerns between these parts?

A: Both components use the 1206 (3216 Metric) package with identical length and width dimensions (0.126" x 0.063"). The maximum seated height differs: RG3216P-2612-B-T1 is 0.020" (0.50mm) and ERA-8AEB2612V is 0.028" (0.70mm). PCB designs with tight height constraints should verify clearance specifications.

Q: Do both parts have the same moisture sensitivity rating?

A: Yes. Both the RG3216P-2612-B-T1 and ERA-8AEB2612V carry Moisture Sensitivity Level 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.

Q: What composition type are these resistors?

A: Both components are thin film resistors, which provide the precision tolerance of ±0.1% and low temperature coefficient of ±25ppm/°C required for high-accuracy circuit applications.

Q: Are both parts available in tape and reel packaging?

A: Yes. Both the RG3216P-2612-B-T1 and ERA-8AEB2612V are supplied in Tape & Reel (TR) format suitable for automated assembly processes.