RG3216P-2372-B-T5 Equivalent & Substitute Parts

Part Overview

The RG3216P-2372-B-T5 is a 23.7 kOhms ±0.1% thin film chip resistor manufactured by Susumu in 1206 (3216 Metric) package format. This component is rated for 0.25W (1/4W) power dissipation and features anti-sulfur coating with automotive AEC-Q200 qualification. The part operates across a temperature range of -55°C to 155°C with a temperature coefficient of ±25ppm/°C. Identifying equivalent and substitute parts is necessary to ensure design flexibility, manage supply chain continuity, and maintain component availability across manufacturing cycles.

Substiute Parts

RG3216P-2372-B-T5

SusumuIn Stock: 994RG3216P-2372-B-T5 Datasheet

Current PartRFQ

ERA-8AEB2372V

Panasonic Electronic ComponentsIn Stock: 2435ERA-8AEB2372V Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RG3216P-2372-B-T5 is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Resistance value: 23.7 kOhms (exact match required)
• Tolerance: ±0.1% (precision specification)
• Power rating: 0.25W minimum
• Temperature coefficient: ±25ppm/°C or better
• Operating temperature range: -55°C to 155°C minimum

Mechanical Parameters:

• Package format: 1206 (3216 Metric) only
• Composition: Thin film construction
• Number of terminations: 2

Compliance & Certification:

• Automotive AEC-Q200 qualification
• RoHS3 compliance
• Moisture Sensitivity Level 1

The substitute part ERA-8AEB2372V from Panasonic Electronic Components meets all electrical, mechanical, and compliance requirements for direct substitution.

Parameter Comparison

Engineering Selection Recommendations

The ERA-8AEB2372V from Panasonic Electronic Components is a direct substitute for the RG3216P-2372-B-T5. Both components share identical electrical specifications, package format, and automotive compliance certifications. The ERA-8AEB2372V maintains full AEC-Q200 qualification and ROHS3 compliance, ensuring compatibility in automotive and industrial applications requiring precision resistors.

The maximum seated height difference (0.028" versus 0.020") is within acceptable mechanical tolerances for standard PCB assembly processes and does not preclude substitution in typical circuit board layouts. Both parts are active products with established supply availability.

Selection between these two parts should be based on procurement lead times, inventory availability, and supplier preference, as electrical and mechanical performance are equivalent.

Frequently Asked Questions (FAQ)

Q: Can the ERA-8AEB2372V replace the RG3216P-2372-B-T5 in automotive applications?

A: Yes. Both components carry AEC-Q200 automotive qualification and are rated for identical operating temperature ranges (-55°C to 155°C). Electrical specifications, tolerance, and power ratings are equivalent.

Q: Are there any physical compatibility concerns with the ERA-8AEB2372V?

A: The ERA-8AEB2372V has a maximum seated height of 0.028" compared to 0.020" for the RG3216P-2372-B-T5. This 0.008" difference is within standard PCB assembly tolerances and does not affect compatibility in typical circuit designs.

Q: Do both parts meet the same compliance standards?

A: Yes. Both the RG3216P-2372-B-T5 and ERA-8AEB2372V are ROHS3 compliant, REACH unaffected, and classified as Moisture Sensitivity Level 1 (unlimited shelf life).

Q: What determines if a part can substitute for the RG3216P-2372-B-T5?

A: Substitution requires exact matching of resistance value (23.7 kOhms), tolerance (±0.1%), power rating (0.25W), package format (1206), composition (thin film), temperature coefficient (±25ppm/°C), operating temperature range (-55°C to 155°C), and AEC-Q200 certification.

Q: Are there differences in the anti-sulfur coating between these parts?

A: The RG3216P-2372-B-T5 specifies anti-sulfur coating as a feature. The ERA-8AEB2372V does not list this feature in the provided specifications. Both parts meet automotive AEC-Q200 standards, which include environmental durability requirements.

Q: Can these parts be used interchangeably in high-precision circuits?

A: Yes. Both components maintain ±0.1% tolerance and ±25ppm/°C temperature coefficient, meeting precision requirements for analog circuits, measurement instrumentation, and automotive control systems.