RG3216P-2000-P-T1 Equivalent & Substitute Parts

Part Overview

The RG3216P-2000-P-T1 is a 200 Ohm ±0.02% thin film chip resistor in 1206 (3216 Metric) package format, rated for 0.25W (1/4W) power dissipation. This component features anti-sulfur coating and automotive AEC-Q200 qualification, suitable for high-precision applications requiring tight tolerance specifications. The part is currently classified as obsolete, necessitating identification of equivalent alternatives from active product lines that maintain electrical and mechanical compatibility.

Substiute Parts

RG3216P-2000-P-T1

SusumuIn Stock: 1276RG3216P-2000-P-T1 Datasheet

Current PartRFQ

RG3216V-2000-P-T1

SusumuIn Stock: 779RG3216V-2000-P-T1 Datasheet

UpgradeRFQ

RG3216P-2000-B-T1

SusumuIn Stock: 32468RG3216P-2000-B-T1 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RG3216P-2000-P-T1 is determined by the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 200 Ohms
• Package / Case: 1206 (3216 Metric)
• Power rating: 0.25W (1/4W)
• Composition: Thin Film
• Operating temperature range: -55°C ~ 155°C
• Automotive AEC-Q200 qualification
• RoHS3 compliance

Allowable Variation Parameters:

• Tolerance: ±0.02% or wider (±0.1% acceptable for less critical applications)
• Temperature coefficient: ±5ppm/°C to ±25ppm/°C
• Packaging format: Tape & Reel (TR) acceptable as functional equivalent
• Product status: Active preferred over obsolete

Substitute parts must satisfy all mandatory matching parameters while maintaining electrical performance within the specified operating envelope.

Parameter Comparison

Engineering Selection Recommendations

RG3216V-2000-P-T1 (Upgrade Substitute)

This part is the primary equivalent for the obsolete RG3216P-2000-P-T1. Both components maintain identical resistance (200 Ohms), tolerance (±0.02%), power rating (0.25W), and package format (1206). The RG3216V-2000-P-T1 is currently in active production status with confirmed inventory availability. The improved temperature coefficient (±5ppm/°C versus ±25ppm/°C) provides superior thermal stability. All automotive AEC-Q200, anti-sulfur, and RoHS3 compliance certifications are maintained. This substitute is suitable for direct replacement in applications requiring the original ±0.02% tolerance specification.

RG3216P-2000-B-T1 (Similar Substitute)

This part shares identical electrical characteristics with the main component except for tolerance specification (±0.1% versus ±0.02%). The RG3216P-2000-B-T1 is actively produced with substantial inventory availability (32381 Pcs). All other parameters—resistance value, power rating, package format, operating temperature range, AEC-Q200 qualification, anti-sulfur coating, and RoHS3 compliance—are equivalent. This substitute is applicable for applications where ±0.1% tolerance is acceptable and tighter ±0.02% tolerance is not required.

Frequently Asked Questions (FAQ)

Q: Can RG3216V-2000-P-T1 be used as a direct replacement for RG3216P-2000-P-T1?

A: Yes. Both parts are 200 Ohm ±0.02% thin film resistors in 1206 package with 0.25W power rating, AEC-Q200 qualification, and anti-sulfur coating. The RG3216V-2000-P-T1 is the active production equivalent with improved temperature coefficient performance.

Q: What is the difference between RG3216V-2000-P-T1 and RG3216P-2000-B-T1?

A: The primary difference is tolerance specification. RG3216V-2000-P-T1 maintains ±0.02% tolerance matching the original part, while RG3216P-2000-B-T1 has ±0.1% tolerance. Both are functionally equivalent in all other electrical and mechanical parameters. Selection depends on application tolerance requirements.

Q: Are packaging differences between these parts significant?

A: The main part (RG3216P-2000-P-T1) and substitute parts (RG3216V-2000-P-T1 and RG3216P-2000-B-T1) all use 1206 (3216 Metric) package format with identical physical dimensions (0.126" L x 0.063" W, 3.20mm x 1.60mm). Packaging format variations (Tape & Reel for substitutes) do not affect component functionality or PCB mounting compatibility.

Q: Do all substitute parts maintain automotive qualification?

A: Yes. Both RG3216V-2000-P-T1 and RG3216P-2000-B-T1 carry AEC-Q200 automotive qualification, anti-sulfur coating, and operate across the identical temperature range (-55°C ~ 155°C) as the original part.

Q: Which substitute should be selected for new designs?

A: RG3216V-2000-P-T1 is recommended for new designs requiring ±0.02% tolerance specification. RG3216P-2000-B-T1 is suitable when ±0.1% tolerance is acceptable, offering superior inventory availability.

Q: Are these parts RoHS compliant?

A: Yes. All parts—RG3216P-2000-P-T1, RG3216V-2000-P-T1, and RG3216P-2000-B-T1—are ROHS3 compliant with Moisture Sensitivity Level 1 (Unlimited).