RG3216P-1102-C-T5 Equivalent & Substitute Parts

Part Overview

The RG3216P-1102-C-T5 is an 11 kOhms ±0.25% thin film chip resistor in 1206 (3216 Metric) package rated for 0.25W power dissipation. Manufactured by Susumu, this component features anti-sulfur coating and automotive AEC-Q200 qualification, suitable for high-reliability applications in harsh environments. The part is currently obsolete, necessitating identification of functionally equivalent alternatives that maintain electrical and mechanical compatibility while meeting current availability and compliance requirements.

Key Parameters

Parameter	Value
Resistance	11 kOhms
Tolerance	±0.25%
Power Rating	0.25W (1/4W)
Package	1206 (3216 Metric)
Composition	Thin Film
Temperature Coefficient	±25ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Features	Anti-Sulfur, Automotive AEC-Q200
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the RG3216P-1102-C-T5 is determined by the following critical parameters:

Mandatory Compatibility Parameters:

Resistance value: 11 kOhms (exact match required)
Package type: 1206 (3216 Metric) (physical and electrical compatibility)
Power rating: 0.25W minimum (equal or greater)
Composition: Thin film (electrical performance characteristics)
Operating temperature range: -55°C ~ 155°C minimum (environmental compatibility)

Tolerance Consideration: The original part specifies ±0.25% tolerance. Substitute parts with equal or tighter tolerance (±0.1%, ±0.05%, ±0.02%) are functionally superior and directly interchangeable. Parts with looser tolerance are not acceptable substitutes.

Automotive Qualification: The original part carries AEC-Q200 certification. Substitute parts with AEC-Q200 rating maintain automotive-grade reliability. Parts without this certification may be used in non-automotive applications but represent a downgrade in qualification status.

Temperature Coefficient: The original part specifies ±25ppm/°C. Substitute parts with equal or lower temperature coefficient values provide equal or improved thermal stability and are acceptable.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Temp Coeff (ppm/°C)	Operating Temp (°C)	AEC-Q200	Product Status
RG3216P-1102-C-T5	Susumu	11 kΩ	±0.25%	0.25	±25	-55 ~ 155	Yes	Obsolete
RG3216P-1102-B-T5	Susumu	11 kΩ	±0.1%	0.25	±25	-55 ~ 155	Yes	Active
RG3216N-1102-B-T5	Susumu	11 kΩ	±0.1%	0.25	±10	-55 ~ 155	Yes	Active
RG3216N-1102-W-T1	Susumu	11 kΩ	±0.05%	0.25	±10	-55 ~ 155	Yes	Active
RG3216V-1102-B-T5	Susumu	11 kΩ	±0.1%	0.25	±5	-55 ~ 155	Yes	Active
RG3216V-1102-P-T1	Susumu	11 kΩ	±0.02%	0.25	±5	-55 ~ 155	Yes	Active
RG3216V-1102-W-T1	Susumu	11 kΩ	±0.05%	0.25	±5	-55 ~ 155	Yes	Active
RT1206CRD0711KL	YAGEO	11 kΩ	±0.25%	0.25	±25	-55 ~ 155	No	Active
ERA-8AEB113V	Panasonic Electronic Components	11 kΩ	±0.1%	0.25	±25	-55 ~ 155	Yes	Active
MCA12060D1102BP500	Vishay Beyschlag/Draloric/BC Components	11 kΩ	±0.1%	0.25	±25	-55 ~ 125	No	Active
RP73D2B11KBTDF	TE Connectivity Passive Product	11 kΩ	±0.1%	0.25	±15	-55 ~ 155	No	Active

Engineering Selection Recommendations

Primary Substitutes (Susumu RG Series - Same Manufacturer):

The Susumu RG3216P-1102-B-T5 is the direct functional replacement. It maintains identical electrical specifications with improved tolerance (±0.1% vs ±0.25%), identical temperature coefficient, full AEC-Q200 automotive qualification, and active product status. This part is recommended as the first choice for direct substitution.

The Susumu RG3216N series (RG3216N-1102-B-T5, RG3216N-1102-W-T1) provides enhanced performance with tighter tolerance and lower temperature coefficient (±10ppm/°C), while maintaining AEC-Q200 qualification and full operating temperature range.

The Susumu RG3216V series (RG3216V-1102-B-T5, RG3216V-1102-P-T1, RG3216V-1102-W-T1) offers the highest precision options with temperature coefficients as low as ±5ppm/°C and tolerances down to ±0.02%, all with AEC-Q200 qualification.

Secondary Substitutes (Multi-Manufacturer Options):

The Panasonic ERA-8AEB113V provides AEC-Q200 automotive qualification with ±0.1% tolerance and active product status. This part is suitable for automotive applications requiring equivalent qualification levels.

The YAGEO RT1206CRD0711KL matches the original tolerance and temperature coefficient specifications with active availability. However, this part lacks AEC-Q200 certification and is suitable only for non-automotive applications.

The Vishay MCA12060D1102BP500 offers ±0.1% tolerance and anti-sulfur coating but operates only to 125°C maximum (versus 155°C for the original) and lacks AEC-Q200 certification. This part is acceptable only where the reduced temperature range is compatible with application requirements.

The TE Connectivity RP73D2B11KBTDF provides ±0.1% tolerance and active status but lacks AEC-Q200 certification. Temperature coefficient of ±15ppm/°C is intermediate between the original and enhanced options.

Compliance and Availability:

All substitute parts listed are ROHS3 compliant and carry MSL 1 (Unlimited) moisture sensitivity rating, matching the original part's environmental compliance profile. All parts are currently in active production status, ensuring long-term availability and supply chain stability.

Frequently Asked Questions (FAQ)

Q: Can I use a substitute part with tighter tolerance than the original RG3216P-1102-C-T5?

A: Yes. A substitute part with tighter tolerance (such as ±0.1%, ±0.05%, or ±0.02%) is functionally superior and directly interchangeable. Tighter tolerance provides improved circuit performance without introducing compatibility issues. The circuit design based on ±0.25% tolerance will operate correctly with a more precise component.

Q: Is the RG3216P-1102-B-T5 a direct replacement for the obsolete RG3216P-1102-C-T5?

A: Yes. The RG3216P-1102-B-T5 is a direct replacement. Both parts share identical resistance (11 kOhms), power rating (0.25W), package (1206), operating temperature range (-55°C ~ 155°C), temperature coefficient (±25ppm/°C), and AEC-Q200 automotive qualification. The substitute has improved tolerance (±0.1% vs ±0.25%) and active product status.

Q: What is the difference between the Susumu RG3216P, RG3216N, and RG3216V series?

A: These series differ in temperature coefficient and tolerance specifications. The RG3216P series has ±25ppm/°C temperature coefficient. The RG3216N series has ±10ppm/°C temperature coefficient. The RG3216V series has ±5ppm/°C temperature coefficient. All three series maintain the same 11 kOhms resistance, 0.25W power rating, 1206 package, and AEC-Q200 qualification. Selection depends on thermal stability requirements for the application.

Q: Can I use the YAGEO RT1206CRD0711KL in an automotive application?

A: The YAGEO RT1206CRD0711KL lacks AEC-Q200 automotive qualification. While it matches the electrical specifications (11 kOhms, ±0.25%, 0.25W, 1206 package), it is not qualified for automotive use. For automotive applications, use parts with AEC-Q200 certification such as RG3216P-1102-B-T5, RG3216N series, RG3216V series, or ERA-8AEB113V.

Q: Does the Vishay MCA12060D1102BP500 work as a substitute?

A: The Vishay MCA12060D1102BP500 is electrically compatible (11 kOhms, ±0.1%, 0.25W, 1206 package) but has a reduced maximum operating temperature of 125°C compared to the original 155°C. This part is acceptable only if your application operates within the -55°C to 125°C range. For applications requiring the full -55°C to 155°C range, use alternative substitutes.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All substitute parts listed are ROHS3 compliant and carry MSL 1 (Unlimited) moisture sensitivity rating, matching the environmental compliance of the original RG3216P-1102-C-T5.

Q: What is the difference between tape and reel packaging and other packaging options?

A: Tape and reel (TR) packaging is the standard format for automated assembly processes. The original RG3216P-1102-C-T5 was supplied in tape and reel format. All listed substitute parts are available in tape and reel packaging, ensuring compatibility with standard pick-and-place assembly equipment.

Q: Can I substitute a part with a lower temperature coefficient?

A: Yes. A substitute part with a lower temperature coefficient (such as ±10ppm/°C or ±5ppm/°C instead of ±25ppm/°C) provides improved thermal stability and is directly interchangeable. Lower temperature coefficient means the resistance value changes less with temperature variations, which is beneficial for precision applications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message