RG3216P-1072-B-T5 Equivalent & Substitute Parts

Part Overview

The RG3216P-1072-B-T5 is a 10.7 kOhms ±0.1% thin film chip resistor in 1206 (3216 Metric) package rated for 0.25W (1/4W) power dissipation. This component is manufactured by Susumu and features anti-sulfur coating with automotive AEC-Q200 qualification. The part is actively produced and available in high volume inventory (1043 Pcs). Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance ratings are maintained across alternative manufacturers or packaging configurations within the same product series.

Substiute Parts

RG3216P-1072-B-T5

SusumuIn Stock: 1069RG3216P-1072-B-T5 Datasheet

Current PartRFQ

RG3216P-1072-B-T1

SusumuIn Stock: 4633RG3216P-1072-B-T1 Datasheet

DirectRFQ

ERA-8AEB1072V

Panasonic Electronic ComponentsIn Stock: 2122ERA-8AEB1072V Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RG3216P-1072-B-T5 is determined by strict equivalence across the following parameters:

Electrical Specifications:

• Resistance value: 10.7 kOhms
• Tolerance: ±0.1%
• Power rating: 0.25W (1/4W)
• Temperature coefficient: ±25ppm/°C
• Operating temperature range: -55°C ~ 155°C

Mechanical Specifications:

• Package type: 1206 (3216 Metric)
• Physical dimensions: 0.126" L x 0.063" W (3.20mm x 1.60mm)
• Number of terminations: 2

Compliance & Quality:

• Automotive AEC-Q200 qualification
• ROHS3 compliance
• Moisture Sensitivity Level 1
• Thin film composition

All identified substitute parts maintain these core parameters. Variations in seated height, anti-sulfur coating presence, or packaging reel configuration (T5 vs. T1) do not affect functional equivalence in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

RG3216P-1072-B-T1 (Susumu): This part is a direct functional equivalent to the RG3216P-1072-B-T5, differing only in reel packaging configuration (T1 vs. T5). Both are manufactured by Susumu, maintain identical electrical and mechanical specifications, and carry AEC-Q200 automotive qualification. The RG3216P-1072-B-T1 is available in higher inventory volume (4562 Pcs vs. 1043 Pcs). Selection between these two Susumu variants depends solely on packaging reel requirements for production equipment compatibility.

ERA-8AEB1072V (Panasonic Electronic Components): This part provides electrical and mechanical equivalence with one dimensional variance. The seated height maximum is 0.028" (0.70mm) compared to 0.020" (0.50mm) for the Susumu variants. All electrical parameters, temperature performance, AEC-Q200 qualification, and compliance certifications are identical. The ERA-8AEB1072V lacks the anti-sulfur coating feature present in Susumu RG series parts. Selection of the Panasonic alternative is appropriate when supply constraints exist for Susumu parts or when the increased seated height does not conflict with PCB assembly clearance requirements.

Frequently Asked Questions (FAQ)

Q: Can RG3216P-1072-B-T1 be used as a direct replacement for RG3216P-1072-B-T5?

A: Yes. Both parts are manufactured by Susumu with identical electrical specifications (10.7 kOhms ±0.1%, 0.25W, ±25ppm/°C), mechanical dimensions (1206 package, 3.20mm x 1.60mm), and automotive AEC-Q200 qualification. The difference is packaging reel configuration (T1 vs. T5). Functional performance in circuit applications is equivalent.

Q: What is the difference between the Susumu RG3216P-1072-B-T5 and the Panasonic ERA-8AEB1072V?

A: Both parts share identical electrical specifications and AEC-Q200 automotive qualification. The primary differences are: (1) Manufacturer (Susumu vs. Panasonic), (2) Seated height maximum (0.020" vs. 0.028"), and (3) Anti-sulfur coating (present in Susumu, not specified for Panasonic). Electrical performance and temperature characteristics are equivalent.

Q: Is the seated height difference between RG3216P-1072-B-T5 (0.020") and ERA-8AEB1072V (0.028") significant for PCB assembly?

A: The 0.008" (0.20mm) height difference may be relevant for applications with strict clearance constraints, such as low-profile assemblies or designs with minimal component-to-component spacing. For standard PCB designs, this difference is typically not a limiting factor. Verify clearance requirements against specific PCB layout specifications.

Q: Are all three parts RoHS3 compliant and suitable for automotive applications?

A: Yes. All three parts (RG3216P-1072-B-T5, RG3216P-1072-B-T1, and ERA-8AEB1072V) are ROHS3 compliant, carry AEC-Q200 automotive qualification, and operate across the -55°C ~ 155°C temperature range. All are suitable for automotive circuit applications meeting these compliance requirements.

Q: What does the packaging designation T5 and T1 indicate?

A: T5 and T1 refer to reel packaging configurations used in automated component placement equipment. These designations specify reel diameter, tape width, and sprocket hole positioning. The electrical and mechanical performance of the component is identical; the difference affects only the compatibility with specific tape-and-reel handling equipment during manufacturing.

Q: Can these parts be used interchangeably in high-precision analog circuits?

A: Yes. All three parts maintain ±0.1% tolerance and ±25ppm/°C temperature coefficient specifications, making them suitable for high-precision analog applications. The thin film composition and automotive-grade qualification ensure stable performance across the operating temperature range.