RG2012V-8871-C-T5 Equivalent & Substitute Parts

Part Overview

The RG2012V-8871-C-T5 is an 8.87 kOhms ±0.25% thin film chip resistor in 0805 (2012 Metric) package rated for 0.125W (1/8W) power dissipation. This component is designed for automotive applications and carries AEC-Q200 qualification with anti-sulfur construction. The part is currently classified as obsolete, necessitating identification of active equivalent alternatives that maintain electrical and mechanical compatibility while offering enhanced performance characteristics.

Substiute Parts

RG2012V-8871-C-T5

SusumuIn Stock: 666RG2012V-8871-C-T5 Datasheet

Current PartRFQ

RG2012V-8871-B-T5

SusumuIn Stock: 792RG2012V-8871-B-T5 Datasheet

UpgradeRFQ

RG2012V-8871-P-T1

SusumuIn Stock: 1129RG2012V-8871-P-T1 Datasheet

UpgradeRFQ

RG2012V-8871-W-T1

SusumuIn Stock: 747RG2012V-8871-W-T1 Datasheet

UpgradeRFQ

RG2012V-8871-W-T5

SusumuIn Stock: 781RG2012V-8871-W-T5 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RG2012V-8871-C-T5 is determined by the following fixed parameters that must remain constant across all alternatives:

Fixed Parameters (Non-Negotiable):

• Resistance value: 8.87 kOhms
• Package type: 0805 (2012 Metric)
• Power rating: 0.125W (1/8W)
• Composition: Thin Film
• Temperature coefficient: ±5ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Automotive qualification: AEC-Q200
• Anti-sulfur construction
• RoHS3 compliance

Variable Parameter (Substitution Basis):

• Tolerance: The substitute parts offer tighter tolerance specifications (±0.1%, ±0.02%, ±0.05%) compared to the original ±0.25%, representing performance upgrades while maintaining full electrical and mechanical compatibility.

All substitute parts are manufactured by Susumu within the RG series and maintain identical physical dimensions, termination count, and environmental ratings.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection Criteria:

All substitute parts are direct functional equivalents to the RG2012V-8871-C-T5 with superior tolerance specifications. Selection among the four active alternatives is based on application-specific tolerance requirements:

RG2012V-8871-B-T5 (±0.1% Tolerance)

• Suitable for applications requiring moderate tolerance improvement over the original ±0.25%
• Active product status with established supply chain
• Intermediate precision level for general automotive circuits

RG2012V-8871-P-T1 (±0.02% Tolerance)

• Highest precision option among available substitutes
• Appropriate for precision measurement circuits, calibration networks, and high-accuracy analog applications
• Active product status with highest inventory availability (1087 Pcs)

RG2012V-8871-W-T1 (±0.05% Tolerance)

• Precision-grade alternative with tighter tolerance than original part
• Suitable for applications requiring enhanced accuracy without extreme precision demands
• Active product status

RG2012V-8871-W-T5 (±0.05% Tolerance)

• Equivalent tolerance specification to RG2012V-8871-W-T1
• Active product status with comparable inventory levels
• Functionally interchangeable with RG2012V-8871-W-T1

All substitute parts maintain identical physical dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm), maximum seated height (0.020" / 0.50mm), and two-terminal configuration. All parts retain AEC-Q200 automotive qualification, anti-sulfur construction, and ROHS3 compliance. Direct PCB layout and footprint compatibility is assured.

Frequently Asked Questions (FAQ)

Q: Can RG2012V-8871-C-T5 be directly replaced with any of the substitute parts?

A: Yes. All substitute parts are direct replacements. They maintain identical resistance value (8.87 kOhms), package type (0805), power rating (0.125W), physical dimensions, and environmental specifications. The substitutes offer tighter tolerance specifications, which represent performance improvements rather than compatibility issues.

Q: What is the primary difference between the substitute parts?

A: The primary difference is tolerance specification. RG2012V-8871-B-T5 offers ±0.1% tolerance, RG2012V-8871-P-T1 offers ±0.02% tolerance, and both RG2012V-8871-W-T1 and RG2012V-8871-W-T5 offer ±0.05% tolerance. All other electrical and mechanical parameters remain identical.

Q: Are all substitute parts automotive-qualified?

A: Yes. All substitute parts carry AEC-Q200 qualification, anti-sulfur construction, and operate across the identical temperature range (-55°C ~ 155°C). They are suitable for automotive applications.

Q: What is the difference between RG2012V-8871-W-T1 and RG2012V-8871-W-T5?

A: Both parts have identical electrical specifications (8.87 kOhms ±0.05%). The designation difference (T1 vs T5) relates to packaging tape specifications. Both are available in Tape & Reel (TR) packaging and are functionally equivalent for circuit applications.

Q: Why is the original RG2012V-8871-C-T5 marked as obsolete?

A: Product obsolescence is determined by manufacturer lifecycle decisions. The availability of active equivalent alternatives with superior tolerance specifications (RG2012V-8871-B-T5, RG2012V-8871-P-T1, RG2012V-8871-W-T1, RG2012V-8871-W-T5) provides direct upgrade paths for new designs and production transitions.

Q: Are there any PCB layout modifications required when substituting these parts?

A: No. All substitute parts maintain identical 0805 (2012 Metric) package dimensions and two-terminal configuration. Existing PCB footprints and layouts require no modification.

Q: Which substitute part should be selected for precision analog circuits?

A: RG2012V-8871-P-T1 with ±0.02% tolerance is the appropriate selection for precision applications requiring the tightest tolerance specification among available alternatives.

Q: Do all substitute parts have the same moisture sensitivity rating?

A: Yes. All parts, including the original RG2012V-8871-C-T5 and all substitutes, have Moisture Sensitivity Level (MSL) 1 (Unlimited), indicating no moisture sensitivity restrictions.