RG2012V-8250-C-T5 Equivalent & Substitute Parts

Part Overview

The RG2012V-8250-C-T5 is a 825 Ohm ±0.25% thin film chip resistor in 0805 (2012 Metric) package rated for 0.125W (1/8W) power dissipation. This component is designed for automotive applications with AEC-Q200 qualification and anti-sulfur construction. The part is currently obsolete, necessitating identification of equivalent substitute components that maintain electrical and mechanical compatibility while offering improved performance characteristics or active product status.

Substiute Parts

RG2012V-8250-C-T5

SusumuIn Stock: 935RG2012V-8250-C-T5 Datasheet

Current PartRFQ

RG2012V-8250-B-T5

SusumuIn Stock: 859RG2012V-8250-B-T5 Datasheet

UpgradeRFQ

RG2012V-8250-P-T1

SusumuIn Stock: 800RG2012V-8250-P-T1 Datasheet

UpgradeRFQ

RG2012V-8250-W-T1

SusumuIn Stock: 1149RG2012V-8250-W-T1 Datasheet

UpgradeRFQ

RG2012V-8250-W-T5

SusumuIn Stock: 1164RG2012V-8250-W-T5 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RG2012V-8250-C-T5 is determined by strict equivalence in the following parameters:

Critical Parameters (Must Match):

• Resistance value: 825 Ohms
• Power rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thin Film
• Temperature coefficient: ±5ppm/°C
• Operating temperature range: -55°C to 155°C
• Automotive rating: AEC-Q200
• Anti-sulfur construction

Allowable Variation:

• Tolerance: Substitute parts may have equal or tighter (lower) tolerance values. Tighter tolerance specifications are acceptable as they represent improved precision without compromising circuit compatibility.

All substitute parts listed maintain identical mechanical dimensions, electrical characteristics, and automotive compliance ratings. Tolerance improvements represent upgrades in precision performance while maintaining full functional equivalence.

Parameter Comparison

Engineering Selection Recommendations

Primary Recommendation: RG2012V-8250-W-T5

The RG2012V-8250-W-T5 provides direct functional equivalence with active product status. This part maintains all critical electrical and mechanical specifications of the obsolete RG2012V-8250-C-T5 while offering improved tolerance (±0.05% versus ±0.25%). Active product status ensures long-term availability and supply chain continuity. Inventory availability of 1099 pieces supports production requirements.

Secondary Recommendation: RG2012V-8250-W-T1

The RG2012V-8250-W-T1 is functionally equivalent with identical tolerance specification (±0.05%) and active product status. This part differs only in packaging configuration (Tape & Reel). Selection between RG2012V-8250-W-T5 and RG2012V-8250-W-T1 depends on assembly process requirements and packaging compatibility.

Precision Upgrade Option: RG2012V-8250-P-T1

The RG2012V-8250-P-T1 offers the highest precision tolerance (±0.02%) for applications requiring enhanced accuracy. This part maintains all other specifications and carries active product status. Selection is appropriate when circuit design specifications demand tighter tolerance performance.

Intermediate Precision Option: RG2012V-8250-B-T5

The RG2012V-8250-B-T5 provides intermediate tolerance improvement (±0.1%) with active product status and Tape & Reel packaging. This option balances precision enhancement with cost considerations.

All substitute parts maintain AEC-Q200 automotive qualification, anti-sulfur construction, ROHS3 compliance, and identical operating temperature range. Direct PCB footprint compatibility is assured through identical 0805 package specifications.

Frequently Asked Questions (FAQ)

Q: Can RG2012V-8250-C-T5 be directly replaced with any of the listed substitutes?

A: Yes. All listed substitute parts are direct replacements. They maintain identical resistance value (825 Ohms), power rating (0.125W), package (0805), composition (thin film), temperature coefficient (±5ppm/°C), operating temperature range (-55°C to 155°C), and automotive qualification (AEC-Q200). Substitute parts feature equal or improved tolerance specifications.

Q: What is the difference between the substitute parts?

A: The substitute parts differ only in tolerance specification and product status. RG2012V-8250-B-T5 offers ±0.1% tolerance, RG2012V-8250-W-T1 and RG2012V-8250-W-T5 offer ±0.05% tolerance, and RG2012V-8250-P-T1 offers ±0.02% tolerance. All substitute parts carry active product status, whereas the original RG2012V-8250-C-T5 is obsolete.

Q: Are there packaging differences between substitute parts?

A: Yes. RG2012V-8250-B-T5, RG2012V-8250-P-T1, RG2012V-8250-W-T1, and RG2012V-8250-W-T5 are supplied in Tape & Reel (TR) packaging. The original RG2012V-8250-C-T5 packaging configuration is not specified in the provided data. Verify packaging compatibility with assembly equipment requirements.

Q: Do all substitute parts meet automotive standards?

A: Yes. All substitute parts carry AEC-Q200 qualification and anti-sulfur construction, identical to the original part. All parts are ROHS3 compliant and REACH unaffected.

Q: Which substitute part should be selected for highest precision?

A: The RG2012V-8250-P-T1 provides the tightest tolerance specification at ±0.02%, compared to ±0.25% of the original part. Selection depends on circuit design tolerance requirements.

Q: Are the substitute parts pin-compatible with the original part?

A: Yes. All substitute parts use the 0805 (2012 Metric) package with identical dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm) and two terminations. PCB footprints are identical.

Q: What is the inventory status of substitute parts?

A: RG2012V-8250-W-T5 has 1099 pieces in stock, RG2012V-8250-W-T1 has 1077 pieces, RG2012V-8250-P-T1 has 694 pieces, and RG2012V-8250-B-T5 has 775 pieces available as new original stock.