RG2012V-682-W-T5 Equivalent & Substitute Parts

Part Overview

The RG2012V-682-W-T5 is a 6.8 kOhms ±0.05% thin film chip resistor in 0805 (2012 Metric) package format, rated for 0.125W (1/8W) power dissipation. This component is manufactured by Susumu and features anti-sulfur coating with AEC-Q200 automotive qualification. The part is currently in active production status with 1062 units available in stock. Substitute parts are identified to address inventory availability, tolerance requirements, or specific application needs while maintaining electrical and mechanical compatibility.

Substiute Parts

RG2012V-682-W-T5

SusumuIn Stock: 1086RG2012V-682-W-T5 Datasheet

Current PartRFQ

RG2012V-682-P-T1

SusumuIn Stock: 2130RG2012V-682-P-T1 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RG2012V-682-W-T5 is determined by the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 6.8 kOhms
• Package / Case: 0805 (2012 Metric)
• Power rating: 0.125W (1/8W) minimum
• Composition: Thin Film
• Temperature coefficient: ±5ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Automotive qualification: AEC-Q200
• Anti-sulfur feature

Allowable Variation:

• Tolerance: May be equal to or tighter (lower numerical value) than ±0.05%

The substitute part RG2012V-682-P-T1 meets all mandatory matching parameters and provides improved tolerance specification (±0.02% versus ±0.05%), making it a direct upgrade substitute suitable for applications requiring higher precision.

Parameter Comparison

Engineering Selection Recommendations

RG2012V-682-W-T5 (Primary Part): Use this part for applications where the ±0.05% tolerance specification is sufficient. The part is in active production with established inventory levels (1062 units in stock). Full AEC-Q200 automotive qualification and ROHS3 compliance are confirmed.

RG2012V-682-P-T1 (Substitute Part): This part is a direct upgrade substitute offering tighter tolerance specification (±0.02%) while maintaining all other electrical and mechanical characteristics. Use this part for precision-critical applications or when higher tolerance performance is required. The substitute is also in active production with higher inventory availability (2048 units in stock). All compliance certifications and automotive qualifications are identical to the main part.

Both parts are suitable for direct substitution in PCB designs without layout or assembly modifications due to identical package dimensions and termination configuration.

Frequently Asked Questions (FAQ)

Q: Can RG2012V-682-P-T1 be used as a direct replacement for RG2012V-682-W-T5?

A: Yes. The RG2012V-682-P-T1 is a direct substitute. Both parts share identical resistance value, package format, power rating, temperature coefficient, operating temperature range, and automotive qualification. The substitute offers improved tolerance (±0.02% versus ±0.05%), which is a performance enhancement rather than a limitation.

Q: Are there any PCB layout or assembly differences between these parts?

A: No. Both parts use the 0805 (2012 Metric) package with identical dimensions (0.079" L x 0.049" W, 2.00mm x 1.25mm) and maximum seated height (0.020" / 0.50mm). No PCB footprint or assembly process modifications are required.

Q: What is the significance of the tolerance difference?

A: The RG2012V-682-P-T1 provides ±0.02% tolerance compared to ±0.05% for the RG2012V-682-W-T5. This means the substitute part maintains resistance values within a tighter range around the nominal 6.8 kOhms specification. Applications requiring higher precision in resistance values benefit from the substitute part.

Q: Do both parts meet automotive standards?

A: Yes. Both the RG2012V-682-W-T5 and RG2012V-682-P-T1 carry AEC-Q200 automotive qualification and feature anti-sulfur coating. Both are ROHS3 compliant and have identical moisture sensitivity levels (MSL 1 - Unlimited).

Q: What is the temperature coefficient specification, and is it the same for both parts?

A: Both parts have a temperature coefficient of ±5ppm/°C, indicating the same temperature stability performance across the operating range of -55°C to 155°C.

Q: Are there any compliance or regulatory differences?

A: No. Both parts are ROHS3 compliant, REACH unaffected, and classified under ECCN EAR99. Regulatory and compliance status is identical.