RG2012V-561-C-T5 Equivalent & Substitute Parts

Part Overview

The RG2012V-561-C-T5 is a 560 Ohms ±0.25% thin film chip resistor in 0805 (2012 Metric) package format, rated for 0.125W (1/8W) power dissipation. This component is designed for automotive applications and carries AEC-Q200 qualification with anti-sulfur coating. The part is currently classified as obsolete, necessitating identification of active equivalent alternatives that maintain electrical and mechanical compatibility while meeting automotive reliability standards.

Substiute Parts

RG2012V-561-C-T5

SusumuIn Stock: 852RG2012V-561-C-T5 Datasheet

Current PartRFQ

RG2012V-561-B-T5

SusumuIn Stock: 1033RG2012V-561-B-T5 Datasheet

UpgradeRFQ

RG2012V-561-P-T1

SusumuIn Stock: 990RG2012V-561-P-T1 Datasheet

UpgradeRFQ

RG2012V-561-W-T1

SusumuIn Stock: 970RG2012V-561-W-T1 Datasheet

UpgradeRFQ

RG2012V-561-W-T5

SusumuIn Stock: 950RG2012V-561-W-T5 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RG2012V-561-C-T5 is determined by strict equivalence in the following parameters:

Critical Parameters (Must Match):

• Resistance value: 560 Ohms
• Power rating: 0.125W (1/8W)
• Package format: 0805 (2012 Metric)
• Composition: Thin Film
• Temperature coefficient: ±5ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Automotive qualification: AEC-Q200
• Anti-sulfur coating: Required

Allowable Variation Parameters:

• Tolerance: Substitute parts with equal or tighter (lower) tolerance values are electrically compatible
• Product status: Active alternatives are preferred over obsolete parts
• Packaging format: Tape & Reel (TR) is compatible with the original packaging specification

All substitute parts listed maintain identical mechanical dimensions (0.079" L x 0.049" W, 2.00mm x 1.25mm) and electrical characteristics except for tolerance specifications, which are tightened in the available alternatives.

Parameter Comparison

Engineering Selection Recommendations

All four substitute parts are direct functional equivalents to the RG2012V-561-C-T5 and are suitable for replacement in automotive applications requiring AEC-Q200 qualification.

RG2012V-561-B-T5 provides a tolerance improvement to ±0.1% while maintaining all other electrical and mechanical specifications. This part is active and available in Tape & Reel packaging.

RG2012V-561-P-T1 offers the highest tolerance specification at ±0.02%, suitable for precision circuit applications. This part is active and available in Tape & Reel packaging.

RG2012V-561-W-T1 and RG2012V-561-W-T5 both provide ±0.05% tolerance, representing a mid-range precision option. Both parts are active and available in Tape & Reel packaging. The primary distinction between these two variants is the packaging reel designation (T1 versus T5), which does not affect electrical performance or mechanical compatibility.

Selection among these alternatives should be based on the specific tolerance requirements of the application circuit. All substitute parts maintain compliance with automotive standards, RoHS3 requirements, and environmental specifications of the original component.

Frequently Asked Questions (FAQ)

Q: Can RG2012V-561-B-T5, RG2012V-561-P-T1, RG2012V-561-W-T1, and RG2012V-561-W-T5 be used interchangeably with RG2012V-561-C-T5?

A: Yes. All substitute parts maintain identical resistance values (560 Ohms), power ratings (0.125W), package dimensions (0805 / 2012 Metric), temperature coefficients (±5ppm/°C), operating temperature ranges (-55°C ~ 155°C), and automotive qualifications (AEC-Q200). The substitute parts feature equal or tighter tolerance specifications, making them electrically and mechanically compatible.

Q: What is the difference between the tolerance specifications of these parts?

A: The RG2012V-561-C-T5 has a tolerance of ±0.25%. The substitute parts offer improved tolerance specifications: RG2012V-561-B-T5 (±0.1%), RG2012V-561-W-T1 and RG2012V-561-W-T5 (±0.05%), and RG2012V-561-P-T1 (±0.02%). Tighter tolerance specifications result in more precise resistance values and are suitable for applications requiring higher accuracy.

Q: Are there packaging differences between these parts?

A: The main part RG2012V-561-C-T5 does not specify a packaging format in the provided data. All substitute parts are supplied in Tape & Reel (TR) packaging, which is standard for automated assembly processes. The physical component dimensions remain identical across all parts.

Q: Why is the RG2012V-561-C-T5 listed as obsolete?

A: The RG2012V-561-C-T5 is classified as obsolete, indicating it is no longer in active production. All four substitute parts are classified as active and are currently available in inventory, making them suitable for new designs and ongoing production requirements.

Q: Do all these parts meet automotive standards?

A: Yes. All parts, including the main part and all substitutes, carry AEC-Q200 automotive qualification and feature anti-sulfur coating. All parts are ROHS3 compliant and have Moisture Sensitivity Level 1 (Unlimited), meeting automotive reliability and environmental requirements.

Q: What is the difference between RG2012V-561-W-T1 and RG2012V-561-W-T5?

A: Both parts are identical in electrical specifications and tolerance (±0.05%). The difference lies in the reel designation (T1 versus T5), which refers to the packaging reel format used for component delivery. This distinction does not affect electrical performance or mechanical compatibility in circuit applications.