RG2012V-3570-C-T5 Equivalent & Substitute Parts

Part Overview

The RG2012V-3570-C-T5 is a 357 Ohms ±0.25% thin film chip resistor in 0805 (2012 Metric) package rated for 0.125W (1/8W) power dissipation. This component features anti-sulfur construction and automotive AEC-Q200 qualification, suitable for high-reliability applications requiring precision resistance values across extended temperature ranges from -55°C to 155°C.

The RG2012V-3570-C-T5 is classified as obsolete. Equivalent and substitute parts with improved tolerance specifications and active product status are available to maintain design continuity and ensure long-term supply chain reliability.

Substiute Parts

RG2012V-3570-C-T5

SusumuIn Stock: 728RG2012V-3570-C-T5 Datasheet

Current PartRFQ

RG2012V-3570-B-T5

SusumuIn Stock: 1176RG2012V-3570-B-T5 Datasheet

UpgradeRFQ

RG2012V-3570-P-T1

SusumuIn Stock: 980RG2012V-3570-P-T1 Datasheet

UpgradeRFQ

RG2012V-3570-W-T1

SusumuIn Stock: 1221RG2012V-3570-W-T1 Datasheet

UpgradeRFQ

RG2012V-3570-W-T5

SusumuIn Stock: 1080RG2012V-3570-W-T5 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RG2012V-3570-C-T5 is determined by strict equivalence across the following parameters:

Fixed Parameters (Non-Negotiable for Substitution):

• Resistance value: 357 Ohms
• Power rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thin Film
• Features: Anti-Sulfur, Automotive AEC-Q200
• Temperature coefficient: ±5ppm/°C
• Operating temperature range: -55°C ~ 155°C
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity level: 1 (Unlimited)

Variable Parameter (Allows Substitution):

• Tolerance: The main part specifies ±0.25%. Substitute parts with equal or tighter (lower) tolerance values are functionally equivalent and directly interchangeable. Tighter tolerance specifications represent improved precision without compromising circuit performance.

All substitute parts listed maintain identical electrical and mechanical characteristics except for tolerance specifications, which are equal to or better than the original part.

Parameter Comparison

Engineering Selection Recommendations

Primary Recommendation: RG2012V-3570-P-T1

The RG2012V-3570-P-T1 offers the tightest tolerance specification at ±0.02% and maintains active product status. This part is suitable for applications requiring maximum precision while maintaining full compatibility with the original RG2012V-3570-C-T5 footprint and electrical characteristics. Active status ensures sustained availability and supply chain continuity.

Secondary Recommendation: RG2012V-3570-W-T1 or RG2012V-3570-W-T5

Both RG2012V-3570-W-T1 and RG2012V-3570-W-T5 provide ±0.05% tolerance with active product status. These parts deliver improved precision over the original ±0.25% specification while maintaining full AEC-Q200 automotive qualification and anti-sulfur construction. The W-T1 and W-T5 variants differ only in packaging configuration (Tape & Reel).

Alternative Recommendation: RG2012V-3570-B-T5

The RG2012V-3570-B-T5 provides ±0.1% tolerance with active product status. This part represents a moderate improvement in tolerance specification and is suitable for applications where the original ±0.25% tolerance remains acceptable but improved precision is desired.

All substitute parts maintain identical mechanical dimensions, thermal characteristics, and automotive compliance ratings. Direct PCB footprint compatibility is assured across all listed alternatives.

Frequently Asked Questions (FAQ)

Q: Can RG2012V-3570-B-T5, RG2012V-3570-P-T1, RG2012V-3570-W-T1, and RG2012V-3570-W-T5 be used as direct replacements for RG2012V-3570-C-T5?

A: Yes. All listed substitute parts are direct replacements. They maintain identical resistance values, power ratings, package dimensions, temperature coefficients, and operating temperature ranges. The substitute parts feature equal or tighter tolerance specifications, which represent improved precision without introducing incompatibility.

Q: What is the difference between the substitute parts?

A: The substitute parts differ only in tolerance specification and product status. RG2012V-3570-P-T1 offers ±0.02% tolerance (tightest), RG2012V-3570-W-T1 and RG2012V-3570-W-T5 offer ±0.05% tolerance, and RG2012V-3570-B-T5 offers ±0.1% tolerance. All substitute parts are active products, whereas the original RG2012V-3570-C-T5 is obsolete.

Q: Are there packaging differences between substitute parts?

A: All substitute parts use 0805 (2012 Metric) package with identical physical dimensions: 0.079" L x 0.049" W (2.00mm x 1.25mm) and maximum seated height of 0.020" (0.50mm). Packaging configuration (Tape & Reel) is consistent across all alternatives.

Q: Do all substitute parts maintain AEC-Q200 automotive qualification?

A: Yes. All substitute parts are AEC-Q200 rated with anti-sulfur construction, identical to the original RG2012V-3570-C-T5. Operating temperature range remains -55°C to 155°C across all alternatives.

Q: Why is the original RG2012V-3570-C-T5 classified as obsolete?

A: The RG2012V-3570-C-T5 has reached end-of-life status. Active substitute parts with improved tolerance specifications are available to ensure design continuity and long-term supply chain reliability.

Q: Which substitute part should be selected for new designs?

A: For new designs, RG2012V-3570-P-T1 is recommended due to its superior ±0.02% tolerance specification and confirmed active product status. For cost-sensitive applications where ±0.05% tolerance is acceptable, RG2012V-3570-W-T1 or RG2012V-3570-W-T5 are suitable alternatives.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All substitute parts are ROHS3 compliant with Moisture Sensitivity Level 1 (Unlimited), matching the original part's environmental compliance profile.