RG2012V-332-B-T1 Equivalent & Substitute Parts

Part Overview

The RG2012V-332-B-T1 is a 3.3 kOhms ±0.1% thin film chip resistor in 0805 (2012 Metric) package rated for 0.125W (1/8W) power dissipation. This component is designed for automotive applications with AEC-Q200 qualification and anti-sulfur construction. The part is currently listed as obsolete. Equivalent and substitute parts are available from the same manufacturer in active production status, as well as from alternative qualified manufacturers, providing continued design support and supply chain continuity.

Substiute Parts

RG2012V-332-B-T1

SusumuIn Stock: 944RG2012V-332-B-T1 Datasheet

Current PartRFQ

RG2012V-332-B-T5

SusumuIn Stock: 1152RG2012V-332-B-T5 Datasheet

DirectRFQ

RG2012V-332-P-T1

SusumuIn Stock: 932RG2012V-332-P-T1 Datasheet

UpgradeRFQ

RG2012V-332-W-T1

SusumuIn Stock: 947RG2012V-332-W-T1 Datasheet

UpgradeRFQ

RG2012V-332-W-T5

SusumuIn Stock: 1231RG2012V-332-W-T5 Datasheet

UpgradeRFQ

TNPU08053K30BZEN00

Vishay DaleIn Stock: 2097TNPU08053K30BZEN00 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RG2012V-332-B-T1 is determined by the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 3.3 kOhms
• Package / Case: 0805 (2012 Metric)
• Power rating: 0.125W (1/8W)
• Composition: Thin Film
• Temperature coefficient: ±5ppm/°C
• AEC-Q200 automotive qualification
• Anti-sulfur construction
• RoHS3 compliance

Allowable Variation Parameters:

• Tolerance: Can be equal (±0.1%) or tighter (±0.05%, ±0.02%)
• Packaging format: Bulk or Tape & Reel (TR)
• Manufacturer: Susumu or qualified alternative (Vishay Dale)
• Operating temperature range: Can be equal or extended
• Product status: Active preferred over obsolete

Substitute parts must maintain electrical equivalence across all mandatory parameters while potentially offering improved tolerance specifications or active production status.

Parameter Comparison

Engineering Selection Recommendations

Direct Equivalent (Same Tolerance):

RG2012V-332-B-T5 is the direct equivalent to RG2012V-332-B-T1. Both parts share identical electrical specifications including 3.3 kOhms resistance, ±0.1% tolerance, 0.125W power rating, and -55°C to 155°C operating temperature range. The primary difference is packaging format (Tape & Reel versus bulk) and active production status. This part is recommended for new designs and production continuity.

TNPU08053K30BZEN00 (Vishay Dale) provides equivalent electrical performance with identical tolerance and power rating. This part features moisture-resistant construction and maintains AEC-Q200 qualification. The operating temperature range is -55°C to 125°C, which is suitable for most automotive applications within the specified range. Active production status and higher inventory availability support supply chain reliability.

Upgraded Tolerance Options:

RG2012V-332-W-T1 and RG2012V-332-W-T5 offer tighter tolerance of ±0.05%, providing improved precision over the original ±0.1% specification. These parts are suitable for applications requiring enhanced accuracy while maintaining all other electrical and mechanical characteristics.

RG2012V-332-P-T1 provides the tightest tolerance at ±0.02%, delivering maximum precision for precision analog circuits and measurement applications. This part is recommended where tolerance stack-up analysis requires superior component accuracy.

All substitute parts maintain ROHS3 compliance, AEC-Q200 automotive qualification, and anti-sulfur construction. Selection should be based on tolerance requirements, packaging format needs, and temperature range specifications for the target application.

Frequently Asked Questions (FAQ)

Q: Can RG2012V-332-B-T5 be used as a direct replacement for RG2012V-332-B-T1?

A: Yes. RG2012V-332-B-T5 is electrically and mechanically equivalent to RG2012V-332-B-T1. Both parts have identical resistance (3.3 kOhms), tolerance (±0.1%), power rating (0.125W), package (0805), and operating temperature range (-55°C to 155°C). The difference is packaging format: RG2012V-332-B-T5 is supplied in Tape & Reel format and has active production status.

Q: What is the difference between the tolerance grades available?

A: The RG2012V series offers three tolerance grades for the 3.3 kOhms value: ±0.1% (RG2012V-332-B), ±0.05% (RG2012V-332-W), and ±0.02% (RG2012V-332-P). Tighter tolerance grades provide improved accuracy for precision applications. Selection depends on circuit requirements and tolerance stack-up analysis.

Q: Is TNPU08053K30BZEN00 compatible with the original part?

A: TNPU08053K30BZEN00 is compatible for applications within the overlapping temperature range. Both parts share 3.3 kOhms resistance, ±0.1% tolerance, 0.125W power rating, 0805 package, and AEC-Q200 qualification. The TNPU part operates to 125°C maximum, while the original operates to 155°C. Verify application temperature requirements before substitution.

Q: What does the T1 and T5 designation indicate?

A: The T1 and T5 designations indicate packaging format. T1 represents bulk packaging, while T5 represents Tape & Reel (TR) packaging. Both formats contain identical components; the difference is in delivery and handling format for manufacturing processes.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All listed substitute parts are ROHS3 compliant and maintain AEC-Q200 automotive qualification with anti-sulfur construction, ensuring compatibility with automotive and industrial applications requiring environmental compliance.

Q: Can I use a higher tolerance part in place of the original?

A: No. Higher tolerance parts (±0.1%) cannot replace lower tolerance requirements. However, lower tolerance parts (±0.05% or ±0.02%) can replace ±0.1% specifications, as they provide superior accuracy. Verify circuit tolerance requirements before selecting a substitute.

Q: What is the moisture sensitivity level, and does it affect substitution?

A: All listed parts have Moisture Sensitivity Level (MSL) 1, indicating unlimited shelf life without moisture control requirements. This parameter is equivalent across all substitutes and does not affect substitution decisions.