RG2012V-3011-C-T5 Equivalent & Substitute Parts

Part Overview

The RG2012V-3011-C-T5 is a 3.01 kOhms ±0.25% thin film chip resistor in 0805 (2012 Metric) package rated for 0.125W (1/8W) power dissipation. This component is designed for automotive applications and meets AEC-Q200 qualification standards with anti-sulfur construction. The part is currently classified as obsolete, necessitating identification of active equivalent alternatives that maintain electrical and mechanical compatibility while offering enhanced performance characteristics.

Substiute Parts

RG2012V-3011-C-T5

SusumuIn Stock: 1044RG2012V-3011-C-T5 Datasheet

Current PartRFQ

RG2012V-3011-B-T5

SusumuIn Stock: 753RG2012V-3011-B-T5 Datasheet

UpgradeRFQ

RG2012V-3011-P-T1

SusumuIn Stock: 1296RG2012V-3011-P-T1 Datasheet

UpgradeRFQ

RG2012V-3011-W-T1

SusumuIn Stock: 844RG2012V-3011-W-T1 Datasheet

UpgradeRFQ

RG2012V-3011-W-T5

SusumuIn Stock: 954RG2012V-3011-W-T5 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution compatibility for the RG2012V-3011-C-T5 is determined by the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 3.01 kOhms
• Power rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thin Film
• Features: Anti-Sulfur, Automotive AEC-Q200
• Temperature coefficient: ±5ppm/°C
• Operating temperature range: -55°C ~ 155°C
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity level: 1 (Unlimited)

Variable Parameter (Substitution Basis):

• Tolerance: The obsolete RG2012V-3011-C-T5 features ±0.25% tolerance. Active substitute parts are available with tighter tolerances (±0.1%, ±0.05%, ±0.02%), which provide improved precision while maintaining full backward compatibility. Tighter tolerance specifications do not compromise circuit functionality in applications designed for the original ±0.25% tolerance.

All substitute parts listed maintain identical electrical performance in the specified operating conditions and are qualified to the same automotive standards.

Parameter Comparison

Engineering Selection Recommendations

RG2012V-3011-B-T5 (±0.1% Tolerance) This substitute provides improved tolerance specification (±0.1% versus ±0.25%) while maintaining all other electrical and mechanical parameters. The part is active in production with established supply availability. Selection is appropriate for applications requiring enhanced precision without redesign.

RG2012V-3011-W-T1 (±0.05% Tolerance) This substitute offers tighter tolerance (±0.05%) and is actively produced. The T1 tape reel designation indicates standard tape packaging. This option is suitable for precision-critical applications where the improved tolerance specification provides measurable benefit.

RG2012V-3011-W-T5 (±0.05% Tolerance) Functionally equivalent to RG2012V-3011-W-T1 with identical electrical specifications. The T5 designation indicates alternative tape configuration. Selection between T1 and T5 variants depends on existing assembly equipment compatibility.

RG2012V-3011-P-T1 (±0.02% Tolerance) This substitute represents the highest precision option available, with ±0.02% tolerance specification. The part is actively manufactured with strong inventory availability. Selection is appropriate for high-precision measurement or reference circuit applications where tolerance specification is a critical design parameter.

All substitute parts are AEC-Q200 qualified, ROHS3 compliant, and maintain identical package dimensions, thermal characteristics, and automotive-grade construction as the original part.

Frequently Asked Questions (FAQ)

Q: Can RG2012V-3011-B-T5 be used as a direct replacement for RG2012V-3011-C-T5?

A: Yes. The RG2012V-3011-B-T5 maintains identical resistance value, power rating, package dimensions, and operating temperature range. The tighter tolerance specification (±0.1% versus ±0.25%) provides improved precision and is fully backward compatible with applications designed for the original part.

Q: What is the difference between T1 and T5 tape designations?

A: The T1 and T5 designations indicate different tape reel configurations used during manufacturing and assembly. Both variants contain identical electrical and mechanical specifications. Selection depends on compatibility with existing pick-and-place assembly equipment.

Q: Are all substitute parts automotive-qualified?

A: Yes. All listed substitute parts carry AEC-Q200 qualification and anti-sulfur construction, meeting automotive reliability standards identical to the original RG2012V-3011-C-T5.

Q: Why would I select a tighter tolerance substitute?

A: Tighter tolerance specifications (±0.1%, ±0.05%, ±0.02%) reduce resistor value variation across production batches and temperature ranges. Selection of a tighter tolerance substitute is appropriate when circuit performance depends on precise resistance values or when the original ±0.25% tolerance was selected conservatively.

Q: Are the substitute parts RoHS compliant?

A: Yes. All substitute parts are ROHS3 compliant and REACH unaffected, maintaining environmental compliance identical to the original part.

Q: Can I mix different tolerance variants in the same circuit?

A: Yes. All substitute parts maintain identical electrical performance characteristics and operating ranges. Mixing tolerance variants within a single circuit does not compromise functionality, though design practice typically specifies uniform tolerance across matched resistor networks.

Q: What is the package size for all these parts?

A: All parts, including the main part and all substitutes, use the 0805 (2012 Metric) package with dimensions 0.079" L × 0.049" W (2.00mm × 1.25mm) and maximum seated height of 0.020" (0.50mm). Package compatibility is complete across all variants.