RG2012V-2371-C-T5 Equivalent & Substitute Parts

Part Overview

The RG2012V-2371-C-T5 is a 2.37 kOhms ±0.25% thin film chip resistor in 0805 (2012 Metric) package rated for 0.125W (1/8W) power dissipation. This component is designed for automotive applications and meets AEC-Q200 qualification standards with anti-sulfur construction. The part is currently classified as obsolete, necessitating identification of active equivalent alternatives that maintain electrical and mechanical compatibility while offering improved performance characteristics.

Substiute Parts

RG2012V-2371-C-T5

SusumuIn Stock: 1137RG2012V-2371-C-T5 Datasheet

Current PartRFQ

RG2012V-2371-B-T5

SusumuIn Stock: 933RG2012V-2371-B-T5 Datasheet

UpgradeRFQ

RG2012V-2371-P-T1

SusumuIn Stock: 823RG2012V-2371-P-T1 Datasheet

UpgradeRFQ

RG2012V-2371-W-T1

SusumuIn Stock: 1152RG2012V-2371-W-T1 Datasheet

UpgradeRFQ

RG2012V-2371-W-T5

SusumuIn Stock: 934RG2012V-2371-W-T5 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RG2012V-2371-C-T5 is determined by strict equivalence in the following parameters:

Critical Parameters (Must Match):

• Resistance value: 2.37 kOhms
• Package type: 0805 (2012 Metric)
• Power rating: 0.125W (1/8W)
• Composition: Thin Film
• Temperature coefficient: ±5ppm/°C
• Operating temperature range: -55°C to 155°C
• Automotive rating: AEC-Q200
• Anti-sulfur construction

Allowable Variation Parameters:

• Tolerance: Substitute parts may have equal or tighter tolerance specifications (±0.25%, ±0.1%, ±0.05%, ±0.02%)
• Product status: Active alternatives are preferred over obsolete status
• Packaging format: Tape & Reel (TR) is compatible with the original packaging specification

All four substitute parts maintain identical electrical and mechanical specifications while offering improved tolerance performance and active product status.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection Criteria:

All four substitute parts are direct functional equivalents to the RG2012V-2371-C-T5. Selection among substitutes should be based on tolerance requirements and product availability:

RG2012V-2371-B-T5 (±0.1% Tolerance)

• Provides tighter tolerance specification than the original part
• Active product status with 870 units in stock
• Suitable for applications requiring improved accuracy over the original ±0.25% specification

RG2012V-2371-P-T1 (±0.02% Tolerance)

• Offers the tightest tolerance specification among all alternatives
• Active product status with 767 units in stock
• Appropriate for precision measurement and calibration circuits

RG2012V-2371-W-T1 (±0.05% Tolerance)

• Intermediate tolerance specification between standard and precision grades
• Active product status with 1063 units in stock
• Highest inventory availability among substitutes

RG2012V-2371-W-T5 (±0.05% Tolerance)

• Equivalent tolerance to RG2012V-2371-W-T1
• Active product status with 863 units in stock
• Maintains identical electrical performance characteristics

All substitute parts maintain full compliance with AEC-Q200 automotive qualification, ROHS3 environmental standards, and REACH regulatory requirements. Mechanical compatibility is assured through identical 0805 package dimensions and termination specifications.

Frequently Asked Questions (FAQ)

Q: Can RG2012V-2371-C-T5 be directly replaced with any of the substitute parts?

A: Yes. All four substitute parts are direct replacements. They maintain identical resistance value (2.37 kOhms), power rating (0.125W), package type (0805), composition (thin film), temperature coefficient (±5ppm/°C), operating temperature range (-55°C to 155°C), and automotive qualification (AEC-Q200). The substitutes offer equal or improved tolerance specifications.

Q: What is the difference between the substitute parts?

A: The substitute parts differ only in tolerance specification. RG2012V-2371-B-T5 provides ±0.1% tolerance, RG2012V-2371-W-T1 and RG2012V-2371-W-T5 provide ±0.05% tolerance, and RG2012V-2371-P-T1 provides ±0.02% tolerance. All other electrical and mechanical parameters are identical.

Q: Are the substitute parts suitable for automotive applications?

A: Yes. All substitute parts carry AEC-Q200 qualification and anti-sulfur construction, meeting automotive industry standards. They are suitable for the same automotive applications as the original RG2012V-2371-C-T5.

Q: What is the significance of the product status change from Obsolete to Active?

A: Active product status indicates current manufacturing and availability. The substitute parts are in production and have confirmed inventory, ensuring long-term supply chain reliability compared to the obsolete original part.

Q: Are there any package or footprint differences between the main part and substitutes?

A: No. All parts use the 0805 (2012 Metric) package with identical dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm) and maximum seated height (0.020" / 0.50mm). PCB footprints are interchangeable.

Q: Which substitute should be selected for general replacement?

A: RG2012V-2371-W-T1 or RG2012V-2371-W-T5 are suitable for general replacement, offering improved ±0.05% tolerance over the original ±0.25% specification with high inventory availability. For applications requiring maximum precision, RG2012V-2371-P-T1 is appropriate.

Q: Do all substitutes maintain the same environmental compliance?

A: Yes. All substitute parts are ROHS3 compliant, REACH unaffected, and carry identical ECCN (EAR99) and HTSUS (8533.21.0030) classifications. Moisture sensitivity level remains 1 (Unlimited) across all parts.