RG2012V-152-C-T5 Equivalent & Substitute Parts

Part Overview

The RG2012V-152-C-T5 is a 1.5 kOhms ±0.25% thin film chip resistor in 0805 (2012 Metric) package format, rated for 0.125W (1/8W) power dissipation. This component features anti-sulfur construction and meets AEC-Q200 automotive qualification standards. The part is currently classified as obsolete, necessitating identification of active equivalent alternatives that maintain electrical and mechanical compatibility while offering enhanced performance characteristics.

Substiute Parts

RG2012V-152-C-T5

SusumuIn Stock: 972RG2012V-152-C-T5 Datasheet

Current PartRFQ

RG2012V-152-B-T5

SusumuIn Stock: 1050RG2012V-152-B-T5 Datasheet

UpgradeRFQ

RG2012V-152-P-T1

SusumuIn Stock: 2030RG2012V-152-P-T1 Datasheet

UpgradeRFQ

RG2012V-152-W-T1

SusumuIn Stock: 948RG2012V-152-W-T1 Datasheet

UpgradeRFQ

RG2012V-152-W-T5

SusumuIn Stock: 1022RG2012V-152-W-T5 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution compatibility for the RG2012V-152-C-T5 is determined by the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 1.5 kOhms
• Power rating: 0.125W (1/8W)
• Package format: 0805 (2012 Metric)
• Composition: Thin Film
• Features: Anti-Sulfur, Automotive AEC-Q200
• Temperature coefficient: ±5ppm/°C
• Operating temperature range: -55°C ~ 155°C
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity level: 1 (Unlimited)

Variable Parameter (Substitution Basis):

• Tolerance: The RG2012V-152-C-T5 operates at ±0.25% tolerance. Substitute parts with tighter (lower) tolerance values are electrically compatible and represent performance upgrades, as they maintain or exceed the original specification accuracy.

All identified substitute parts maintain identical electrical and mechanical specifications except for tolerance ratings, which are equal to or tighter than the original part.

Parameter Comparison

Engineering Selection Recommendations

Primary Recommendation: RG2012V-152-P-T1

The RG2012V-152-P-T1 represents the optimal substitute for the obsolete RG2012V-152-C-T5. This part is currently active in production with 1974 units in stock. It maintains all electrical and mechanical specifications of the original component while providing the tightest tolerance specification at ±0.02%, delivering superior accuracy for precision circuit applications. Full AEC-Q200 automotive qualification and ROHS3 compliance are maintained.

Secondary Recommendations:

RG2012V-152-W-T1 and RG2012V-152-W-T5 are functionally equivalent alternatives, each offering ±0.05% tolerance with active product status. Both parts provide improved accuracy over the original ±0.25% specification while maintaining all other electrical and mechanical parameters. RG2012V-152-W-T5 shares the same tape reel packaging designation as the original part.

RG2012V-152-B-T5 provides an intermediate tolerance option at ±0.1% with active product status and identical packaging to the original component.

All substitute parts are suitable for direct replacement in applications requiring 1.5 kOhms resistance in 0805 package format with automotive-grade reliability and anti-sulfur construction.

Frequently Asked Questions (FAQ)

Q: Can RG2012V-152-P-T1 be used as a direct replacement for RG2012V-152-C-T5?

A: Yes. The RG2012V-152-P-T1 is electrically and mechanically compatible with the RG2012V-152-C-T5. Both components share identical resistance value, power rating, package format, temperature coefficient, operating temperature range, and automotive qualification. The substitute part features tighter tolerance (±0.02% versus ±0.25%), which represents an upgrade in accuracy.

Q: What is the difference between the tolerance ratings of these substitute parts?

A: Tolerance defines the acceptable deviation from the nominal 1.5 kOhms resistance value. The RG2012V-152-C-T5 allows ±0.25% deviation (±3.75 Ohms). Substitute parts offer tighter tolerances: RG2012V-152-B-T5 at ±0.1% (±1.5 Ohms), RG2012V-152-W-T1 and RG2012V-152-W-T5 at ±0.05% (±0.75 Ohms), and RG2012V-152-P-T1 at ±0.02% (±0.3 Ohms). Tighter tolerance specifications provide greater resistance accuracy for precision applications.

Q: Are all substitute parts available in the same package format?

A: Yes. All substitute parts are manufactured in the 0805 (2012 Metric) package format, identical to the original RG2012V-152-C-T5. Physical dimensions, footprint, and mounting characteristics are equivalent across all parts listed.

Q: What is the significance of the AEC-Q200 rating?

A: AEC-Q200 is an automotive qualification standard that certifies component reliability for automotive applications. All parts in this substitution group, including the original and all substitutes, meet AEC-Q200 requirements, ensuring suitability for automotive-grade circuit designs.

Q: Why is the original RG2012V-152-C-T5 classified as obsolete?

A: Product obsolescence indicates that the manufacturer has discontinued production of this specific part number. Active substitute parts with superior or equivalent specifications are available to fulfill the same functional requirements in new designs and replacement applications.

Q: Are there any differences in moisture sensitivity between the parts?

A: No. All parts in this substitution group, including the original and all substitutes, are rated at Moisture Sensitivity Level 1 (Unlimited), indicating no moisture sensitivity limitations for storage or handling.

Q: Can these parts be used interchangeably in existing circuit designs?

A: Yes. All substitute parts maintain identical electrical performance parameters and package specifications. Designs utilizing the RG2012V-152-C-T5 can incorporate any of the listed substitute parts without circuit modification. The tighter tolerance specifications of substitute parts may improve overall circuit accuracy.