RG2012P-9762-B-T5 Equivalent & Substitute Parts

Part Overview

The RG2012P-9762-B-T5 is a 97.6 kOhms ±0.1% thin film chip resistor manufactured by Susumu in 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation and features anti-sulfur coating with automotive AEC-Q200 qualification. The part is active in production with 960 pieces currently in stock. Substitute parts are identified to address inventory availability, extended lead times, or specific application requirements while maintaining electrical and mechanical compatibility.

Substiute Parts

RG2012P-9762-B-T5

SusumuIn Stock: 1066RG2012P-9762-B-T5 Datasheet

Current PartRFQ

9-2176093-4

TE Connectivity Passive ProductIn Stock: 19309-2176093-4 Datasheet

DirectRFQ

ERA-6AEB9762V

Panasonic Electronic ComponentsIn Stock: 7355ERA-6AEB9762V Datasheet

DirectRFQ

TNPW080597K6BEEA

Vishay DaleIn Stock: 6169TNPW080597K6BEEA Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 97.6 kOhms
• Tolerance: ±0.1%
• Package / Case: 0805 (2012 Metric)
• Composition: Thin Film
• Temperature Coefficient: ±25ppm/°C
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Allowable Variation Parameters:

• Power Rating: Equal to or greater than 0.125W
• Operating Temperature Range: Equal to or greater than -55°C ~ 155°C
• Automotive Rating: AEC-Q200 qualification preferred but not mandatory for all applications
• Physical Height: Variation acceptable within standard 0805 package specifications

All identified substitute parts meet the mandatory matching parameters. Variations in power rating and physical height are within acceptable tolerances for direct substitution in standard PCB layouts.

Parameter Comparison

Engineering Selection Recommendations

ERA-6AEB9762V (Panasonic Electronic Components)

This substitute provides direct electrical and mechanical equivalence to the RG2012P-9762-B-T5. Both components share identical resistance, tolerance, power rating, and operating temperature specifications. The ERA-6AEB9762V carries AEC-Q200 automotive qualification and ROHS3 compliance. Physical height variation (0.024" versus 0.020") remains within standard 0805 package tolerances. This part is active in production with 7309 pieces in inventory, providing superior availability.

TNPW080597K6BEEA (Vishay Dale)

This substitute meets all mandatory electrical parameters with identical resistance, tolerance, and temperature coefficient. The power rating of 0.26W exceeds the 0.125W requirement, providing additional thermal margin. Operating temperature range extends to 175°C, surpassing the -55°C ~ 155°C specification. The component includes anti-sulfur coating and moisture-resistant features with AEC-Q200 automotive qualification. Physical height of 0.022" (0.55mm) remains within acceptable 0805 package specifications. This part is active with 6135 pieces in inventory.

9-2176093-4 (TE Connectivity Passive Product)

This substitute provides electrical equivalence with identical resistance, tolerance, and temperature coefficient. The power rating of 0.25W (1/4W) exceeds the 0.125W requirement. Operating temperature range matches the -55°C ~ 155°C specification. Physical height of 0.026" (0.65mm) represents the maximum variation within 0805 package tolerances. Automotive AEC-Q200 qualification is not specified for this part. This component is active with 1840 pieces in inventory.

Frequently Asked Questions (FAQ)

Q: Can ERA-6AEB9762V be used as a direct replacement for RG2012P-9762-B-T5?

A: Yes. Both components share identical electrical specifications: 97.6 kOhms ±0.1% resistance, 0.125W power rating, ±25ppm/°C temperature coefficient, and -55°C ~ 155°C operating range. Both carry AEC-Q200 automotive qualification and ROHS3 compliance. Physical height difference (0.024" versus 0.020") is within standard 0805 package tolerances and does not affect PCB assembly compatibility.

Q: What is the difference between the power ratings of the substitute parts?

A: The RG2012P-9762-B-T5 is rated for 0.125W (1/8W). The TNPW080597K6BEEA is rated for 0.26W, and the 9-2176093-4 is rated for 0.25W (1/4W). Higher power ratings indicate greater thermal dissipation capability. All substitute parts can operate safely in applications designed for 0.125W components, as they provide equal or greater power handling capacity.

Q: Are all substitute parts automotive-qualified?

A: ERA-6AEB9762V and TNPW080597K6BEEA both carry AEC-Q200 automotive qualification. The 9-2176093-4 does not specify automotive qualification in the provided data. For applications requiring automotive-grade components, ERA-6AEB9762V or TNPW080597K6BEEA are recommended.

Q: Does the physical height variation affect PCB assembly?

A: Physical height variations among the substitute parts (0.020" to 0.026") remain within standard 0805 (2012 Metric) package specifications. These variations do not affect PCB footprint compatibility or standard reflow soldering processes. Height differences are negligible for typical surface-mount assembly operations.

Q: Can TNPW080597K6BEEA be used in applications with operating temperatures above 155°C?

A: TNPW080597K6BEEA is rated for -55°C ~ 175°C operating temperature range, which exceeds the RG2012P-9762-B-T5 specification of -55°C ~ 155°C. This component is suitable for applications requiring operation up to 175°C. Other substitute parts are limited to 155°C maximum.

Q: What is the significance of the anti-sulfur coating feature?

A: Anti-sulfur coating protects the resistor from corrosion in environments with sulfur-containing compounds. Both the RG2012P-9762-B-T5 and TNPW080597K6BEEA include this feature. The ERA-6AEB9762V and 9-2176093-4 do not specify anti-sulfur coating. For applications in corrosive environments, components with anti-sulfur protection are preferred.

Q: Are all parts ROHS3 compliant?

A: Yes. All four components (RG2012P-9762-B-T5, ERA-6AEB9762V, TNPW080597K6BEEA, and 9-2176093-4) are ROHS3 compliant and carry Moisture Sensitivity Level 1 (Unlimited) rating, indicating no special moisture handling requirements during storage or assembly.