RG2012P-914-B-T5 Equivalent & Substitute Parts

Part Overview

The RG2012P-914-B-T5 is a 910 kOhms ±0.1% thin film chip resistor manufactured by Susumu in 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation and features anti-sulfur coating with automotive AEC-Q200 qualification. The part is active in production status with 5704 units currently in stock. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance ratings are maintained across alternative manufacturers.

Substiute Parts

RG2012P-914-B-T5

SusumuIn Stock: 5733RG2012P-914-B-T5 Datasheet

Current PartRFQ

ERA-6AEB914V

Panasonic Electronic ComponentsIn Stock: 14541ERA-6AEB914V Datasheet

DirectRFQ

RT0805BRD07910KL

YAGEOIn Stock: 8054RT0805BRD07910KL Datasheet

DirectRFQ

TNPW0805910KBEEA

Vishay DaleIn Stock: 2062TNPW0805910KBEEA Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RG2012P-914-B-T5 is determined by the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 910 kOhms
• Tolerance: ±0.1%
• Package / Case: 0805 (2012 Metric)
• Composition: Thin Film
• Temperature Coefficient: ±25ppm/°C
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Allowable Variation Parameters:

• Power Rating: Substitute parts may exceed the 0.125W specification
• Operating Temperature Range: Substitute parts may extend the upper temperature limit
• Height - Seated (Max): Substitute parts may vary within mechanical constraints
• Automotive Rating: Substitute parts may maintain or exceed AEC-Q200 qualification
• Features: Substitute parts may include additional protective features (anti-sulfur, moisture resistant)

Three substitute parts meet these criteria and are qualified for direct replacement in applications requiring the RG2012P-914-B-T5 specifications.

Parameter Comparison

Engineering Selection Recommendations

All three substitute parts are active in production status and maintain ROHS3 compliance with MSL 1 rating, ensuring long-term availability and environmental regulatory adherence.

ERA-6AEB914V (Panasonic Electronic Components): This substitute maintains identical electrical specifications to the RG2012P-914-B-T5, including 0.125W power rating and -55°C ~ 155°C operating range. AEC-Q200 automotive qualification is retained. Height variation of 0.004" (0.10mm) above the main part is within typical PCB assembly tolerances. Inventory availability is 14502 units.

RT0805BRD07910KL (YAGEO): This substitute matches all critical electrical parameters with identical power rating and operating temperature range. The primary distinction is the absence of specified automotive rating designation. Height is 0.024" (0.60mm), matching the Panasonic substitute. Inventory availability is 7985 units.

TNPW0805910KBEEA (Vishay Dale): This substitute provides enhanced power rating of 0.26W, exceeding the 0.125W specification of the main part. Operating temperature range extends to 175°C, providing additional thermal margin. Anti-sulfur and moisture-resistant features are specified. AEC-Q200 automotive qualification is maintained. Height is 0.022" (0.55mm). Inventory availability is 2041 units.

Frequently Asked Questions (FAQ)

Q: Can ERA-6AEB914V be used as a direct replacement for RG2012P-914-B-T5?

A: Yes. The ERA-6AEB914V maintains identical resistance (910 kOhms), tolerance (±0.1%), power rating (0.125W), package (0805), temperature coefficient (±25ppm/°C), and operating range (-55°C ~ 155°C). Both parts carry AEC-Q200 automotive qualification and ROHS3 compliance. The height difference of 0.004" is within standard PCB assembly specifications.

Q: What is the primary difference between RT0805BRD07910KL and the main part RG2012P-914-B-T5?

A: The RT0805BRD07910KL does not specify an automotive rating designation, whereas the RG2012P-914-B-T5 carries AEC-Q200 qualification. All other electrical and mechanical parameters are equivalent. This distinction is relevant only for applications requiring documented automotive-grade component certification.

Q: Why does TNPW0805910KBEEA have a higher power rating of 0.26W?

A: The TNPW0805910KBEEA is specified with 0.26W power rating, which exceeds the 0.125W requirement of the RG2012P-914-B-T5. This higher rating does not prevent substitution; the part operates within the same electrical specifications and maintains all compliance certifications. The increased power rating provides additional thermal margin in applications approaching power dissipation limits.

Q: Are all substitute parts available in Tape & Reel packaging?

A: Yes. All three substitute parts—ERA-6AEB914V, RT0805BRD07910KL, and TNPW0805910KBEEA—are supplied in Tape & Reel (TR) packaging, matching the packaging format of the RG2012P-914-B-T5.

Q: What is the significance of the ±25ppm/°C temperature coefficient across all parts?

A: The temperature coefficient of ±25ppm/°C specifies the maximum change in resistance value per degree Celsius across the operating temperature range. All four parts—main and substitutes—share this specification, ensuring consistent thermal stability and predictable performance across temperature variations from -55°C to 155°C (or 175°C for the Vishay part).

Q: Can TNPW0805910KBEEA be used in applications designed for the RG2012P-914-B-T5?

A: Yes. The TNPW0805910KBEEA is a qualified substitute. The extended operating temperature range (-55°C ~ 175°C) and higher power rating (0.26W) represent performance enhancements rather than deviations. The part maintains the same resistance value, tolerance, package, and compliance ratings. Applications designed for the RG2012P-914-B-T5 specifications operate within the TNPW0805910KBEEA operating envelope.

Q: What is Moisture Sensitivity Level 1, and why is it important?

A: Moisture Sensitivity Level (MSL) 1 indicates unlimited shelf life without moisture exposure controls. All four parts carry MSL 1 rating, meaning they do not require special desiccant packaging or baking procedures prior to assembly. This simplifies inventory management and reduces component handling complexity.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All three substitute parts—ERA-6AEB914V, RT0805BRD07910KL, and TNPW0805910KBEEA—are ROHS3 compliant, matching the compliance status of the RG2012P-914-B-T5. This ensures regulatory adherence for applications subject to RoHS directives.