RG2012P-913-W-T5 Equivalent & Substitute Parts

Part Overview

The RG2012P-913-W-T5 is a 91 kOhms ±0.05% thin film chip resistor manufactured by Susumu in 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation and features anti-sulfur coating with automotive AEC-Q200 qualification. The part is active in production status with 1084 units currently in stock. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and automotive compliance ratings are maintained across alternative manufacturers.

Substiute Parts

RG2012P-913-W-T5

SusumuIn Stock: 1134RG2012P-913-W-T5 Datasheet

Current PartRFQ

ERA-6ARW913V

Panasonic Electronic ComponentsIn Stock: 3620ERA-6ARW913V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RG2012P-913-W-T5 is determined by strict equivalence across the following parameters:

Electrical Specifications: Resistance value (91 kOhms), tolerance (±0.05%), and power rating (0.125W) must be identical. Thin film composition is required to maintain tolerance and temperature stability characteristics.

Mechanical Compatibility: Package format must be 0805 (2012 Metric) with matching termination count (2 terminations) to ensure PCB footprint compatibility and assembly process alignment.

Environmental & Compliance Requirements: Operating temperature range (-55°C ~ 155°C), AEC-Q200 automotive qualification, ROHS3 compliance, and MSL 1 rating must be maintained. These parameters ensure the substitute part meets the same reliability and regulatory standards as the original component.

Packaging Format: Tape & Reel (TR) packaging is maintained for manufacturing continuity.

The ERA-6ARW913V from Panasonic Electronic Components qualifies as a direct substitute based on these criteria.

Parameter Comparison

Engineering Selection Recommendations

Both the RG2012P-913-W-T5 and ERA-6ARW913V are active production components with full AEC-Q200 automotive qualification and ROHS3 compliance. Selection between these parts is based on availability and application-specific requirements.

The RG2012P-913-W-T5 features anti-sulfur coating and a temperature coefficient of ±25ppm/°C. The ERA-6ARW913V provides a tighter temperature coefficient of ±10ppm/°C, which may be advantageous in applications requiring enhanced temperature stability. The ERA-6ARW913V has a maximum seated height of 0.024" (0.60mm) compared to 0.020" (0.50mm) for the RG2012P-913-W-T5; this difference must be verified against PCB assembly clearance requirements.

Both parts maintain identical electrical specifications, package dimensions, and compliance ratings, ensuring functional interchangeability in 0805 footprint designs operating within the -55°C to 155°C temperature range.

Frequently Asked Questions (FAQ)

Q: Can the ERA-6ARW913V replace the RG2012P-913-W-T5 in automotive applications?

A: Yes. Both parts carry AEC-Q200 qualification, operate across the identical temperature range (-55°C ~ 155°C), and maintain ROHS3 compliance. Electrical specifications (91 kOhms ±0.05%, 0.125W) and package format (0805) are equivalent.

Q: What is the difference in temperature coefficient between these parts?

A: The RG2012P-913-W-T5 has a temperature coefficient of ±25ppm/°C, while the ERA-6ARW913V has ±10ppm/°C. The ERA-6ARW913V provides superior temperature stability. Selection depends on circuit design requirements for temperature-dependent drift.

Q: Are there physical dimension differences that affect PCB assembly?

A: Both parts share identical length (0.079") and width (0.049") dimensions. The seated height differs: RG2012P-913-W-T5 is 0.020" (0.50mm) maximum, while ERA-6ARW913V is 0.024" (0.60mm) maximum. Verify clearance requirements for your specific PCB layout and assembly process.

Q: Do both parts require the same handling and storage conditions?

A: Yes. Both parts carry MSL 1 (Unlimited) moisture sensitivity rating, indicating no special moisture control requirements during storage or handling.

Q: Is the anti-sulfur coating on the RG2012P-913-W-T5 a critical differentiator?

A: The anti-sulfur feature on the RG2012P-913-W-T5 provides enhanced corrosion resistance in high-sulfur environments. The ERA-6ARW913V does not specify this feature. Selection should account for environmental exposure conditions in your application.

Q: Can these parts be used interchangeably in existing designs?

A: Electrical and mechanical interchangeability is confirmed. Verify PCB footprint clearance for the height difference (0.004" / 0.10mm) and confirm that the absence of anti-sulfur coating on the ERA-6ARW913V does not conflict with environmental specifications.