RG2012P-88R7-W-T1 Equivalent & Substitute Parts

Part Overview

The RG2012P-88R7-W-T1 is a 88.7 Ohm ±0.05% thin film chip resistor in 0805 (2012 Metric) package rated for 0.125W (1/8W) power dissipation. This component features anti-sulfur coating and automotive AEC-Q200 qualification, designed for high-precision applications requiring tight tolerance and temperature stability across -55°C to 155°C operating range.

The RG2012P-88R7-W-T1 is classified as Obsolete. Equivalent and substitute parts are available in Active product status, providing direct functional replacement with identical electrical specifications and mechanical compatibility.

Substiute Parts

RG2012P-88R7-W-T1

SusumuIn Stock: 1043RG2012P-88R7-W-T1 Datasheet

Current PartRFQ

RG2012P-88R7-W-T5

SusumuIn Stock: 950RG2012P-88R7-W-T5 Datasheet

DirectRFQ

RG2012N-88R7-W-T1

SusumuIn Stock: 1176RG2012N-88R7-W-T1 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RG2012P-88R7-W-T1 is determined by the following critical parameters:

Electrical Equivalence Requirements:

• Resistance value: 88.7 Ohms
• Tolerance: ±0.05%
• Power rating: 0.125W (1/8W)
• Composition: Thin Film
• Temperature coefficient: ±25ppm/°C or better

Mechanical Compatibility Requirements:

• Package / Case: 0805 (2012 Metric)
• Physical dimensions: 0.079" L x 0.049" W (2.00mm x 1.25mm)
• Height - Seated (Max): 0.020" (0.50mm)
• Number of terminations: 2

Compliance & Certification Requirements:

• Automotive AEC-Q200 rating
• Anti-sulfur coating
• RoHS3 compliance
• Moisture Sensitivity Level 1

Parts meeting all three requirement categories are classified as direct substitutes. Parts with improved specifications (lower temperature coefficient) are classified as upgrades.

Parameter Comparison

Engineering Selection Recommendations

RG2012P-88R7-W-T5 (Direct Substitute)

The RG2012P-88R7-W-T5 provides direct functional and mechanical substitution for the obsolete RG2012P-88R7-W-T1. Both parts share identical electrical specifications (88.7 Ohms ±0.05%, 0.125W), temperature coefficient (±25ppm/°C), and mechanical dimensions (0805 package). The RG2012P-88R7-W-T5 maintains Active product status and carries the same automotive AEC-Q200 qualification, anti-sulfur coating, and RoHS3 compliance. The primary difference is packaging format: RG2012P-88R7-W-T5 is supplied in Tape & Reel (TR) format, whereas the main part was supplied in bulk packaging. This substitute is suitable for direct replacement in existing designs without circuit modification.

RG2012N-88R7-W-T1 (Upgrade Substitute)

The RG2012N-88R7-W-T1 offers improved performance characteristics while maintaining full compatibility with the RG2012P-88R7-W-T1. This upgrade part features a superior temperature coefficient of ±10ppm/°C compared to the main part's ±25ppm/°C, providing enhanced temperature stability across the -55°C to 155°C operating range. All other electrical and mechanical parameters remain identical: 88.7 Ohms ±0.05%, 0.125W power rating, 0805 package, and automotive AEC-Q200 qualification. The RG2012N-88R7-W-T1 is Active in product status and supplied in Tape & Reel format. This upgrade is applicable for applications requiring tighter temperature stability performance.

Frequently Asked Questions (FAQ)

Q: Can RG2012P-88R7-W-T5 be used as a direct replacement for RG2012P-88R7-W-T1?

A: Yes. The RG2012P-88R7-W-T5 is a direct substitute with identical electrical specifications (88.7 Ohms ±0.05%, 0.125W), temperature coefficient (±25ppm/°C), and mechanical dimensions (0805 package). Both parts are thin film, anti-sulfur, automotive AEC-Q200 qualified resistors. The only difference is packaging format (Tape & Reel vs. bulk). No circuit modification is required.

Q: What is the difference between RG2012P-88R7-W-T1 and RG2012N-88R7-W-T1?

A: The primary difference is temperature coefficient: RG2012N-88R7-W-T1 has ±10ppm/°C versus RG2012P-88R7-W-T1's ±25ppm/°C. This means the RG2012N-88R7-W-T1 maintains tighter resistance stability across temperature variations. All other specifications are identical: 88.7 Ohms ±0.05%, 0.125W, 0805 package, -55°C to 155°C operating range, and automotive AEC-Q200 qualification.

Q: Are all substitute parts automotive AEC-Q200 qualified?

A: Yes. Both RG2012P-88R7-W-T5 and RG2012N-88R7-W-T1 carry automotive AEC-Q200 qualification, matching the main part RG2012P-88R7-W-T1. All three parts feature anti-sulfur coating and are suitable for automotive applications.

Q: What does the packaging difference (Tape & Reel vs. bulk) mean for component selection?

A: Tape & Reel (TR) packaging is the standard format for automated assembly processes and high-volume production. The substitute parts RG2012P-88R7-W-T5 and RG2012N-88R7-W-T1 are supplied in Tape & Reel format, which is compatible with standard pick-and-place equipment. The main part RG2012P-88R7-W-T1 was supplied in bulk packaging. Both formats contain the same component; packaging format does not affect electrical or mechanical performance.

Q: Are these parts RoHS3 compliant?

A: Yes. All three parts—RG2012P-88R7-W-T1, RG2012P-88R7-W-T5, and RG2012N-88R7-W-T1—are ROHS3 compliant with Moisture Sensitivity Level 1 (Unlimited). They are suitable for applications requiring RoHS compliance.

Q: Can RG2012N-88R7-W-T1 be used in place of RG2012P-88R7-W-T1 in existing designs?

A: Yes. The RG2012N-88R7-W-T1 is mechanically and electrically compatible with identical resistance value (88.7 Ohms ±0.05%), power rating (0.125W), package (0805), and operating temperature range (-55°C to 155°C). The improved temperature coefficient (±10ppm/°C) provides enhanced performance without requiring circuit modification. This upgrade is suitable for direct substitution.

Q: What is the operating temperature range for all substitute parts?

A: All three parts operate across -55°C to 155°C. This range is identical for RG2012P-88R7-W-T1, RG2012P-88R7-W-T5, and RG2012N-88R7-W-T1.

Q: Are there any inventory considerations for these substitute parts?

A: RG2012P-88R7-W-T5 has 862 Pcs in stock, and RG2012N-88R7-W-T1 has 1073 Pcs in stock. Both substitute parts are Active in product status, ensuring continued availability. The main part RG2012P-88R7-W-T1 is Obsolete with 1024 Pcs remaining in inventory.