RG2012P-8250-D-T5 Equivalent & Substitute Parts

Part Overview

The RG2012P-8250-D-T5 is an 825 Ohm thin film chip resistor manufactured by Susumu in 0805 (2012 Metric) package format. This surface mount device is rated for 0.125W (1/8W) power dissipation with ±0.5% tolerance and features automotive AEC-Q200 qualification with anti-sulfur construction. The part is active in production status with RoHS3 compliance and unlimited moisture sensitivity level (MSL 1). Equivalent and substitute parts are identified for applications requiring alternative sourcing, higher tolerance grades, or increased power ratings within the same package footprint.

Substiute Parts

RG2012P-8250-D-T5

SusumuIn Stock: 832RG2012P-8250-D-T5 Datasheet

Current PartRFQ

1-2176092-0

TE Connectivity Passive ProductIn Stock: 28811-2176092-0 Datasheet

DirectRFQ

RT0805DRD07825RL

YAGEOIn Stock: 9440RT0805DRD07825RL Datasheet

DirectRFQ

ERA-6AEB8250V

Panasonic Electronic ComponentsIn Stock: 12079ERA-6AEB8250V Datasheet

UpgradeRFQ

RT0805BRD07825RL

YAGEOIn Stock: 5534RT0805BRD07825RL Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RG2012P-8250-D-T5 is determined by strict equivalence in the following parameters: resistance value (825 Ohms), package format (0805 / 2012 Metric), composition (thin film), temperature coefficient (±25ppm/°C), operating temperature range (-55°C ~ 155°C), and termination count (2). Substitute parts are grouped into two categories based on tolerance and power rating specifications:

Direct Equivalents maintain the original ±0.5% tolerance and 0.125W power rating, providing pin-for-pin and functional interchangeability without circuit redesign.

Upgraded Alternatives offer improved tolerance (±0.1%) or increased power rating (0.25W) while maintaining all other critical parameters. These parts are suitable for applications where tighter tolerance or higher power dissipation capability is beneficial.

All substitute parts maintain RoHS3 compliance, MSL 1 rating, and the same physical footprint dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm).

Parameter Comparison

Engineering Selection Recommendations

RT0805DRD07825RL (YAGEO) provides direct functional equivalence to the RG2012P-8250-D-T5 with identical tolerance (±0.5%) and power rating (0.125W). This part is suitable for applications where the original specification must be maintained and alternative sourcing from YAGEO is acceptable. The part is active in production with RoHS3 compliance and unlimited MSL rating.

RT0805BRD07825RL (YAGEO) and ERA-6AEB8250V (Panasonic) offer improved tolerance specification (±0.1%) while maintaining the 0.125W power rating and 0805 package format. ERA-6AEB8250V additionally carries AEC-Q200 automotive qualification matching the original part's automotive-grade specification. Both parts are suitable for applications requiring tighter tolerance control without power rating changes.

1-2176092-0 (TE Connectivity) provides increased power dissipation capability (0.25W / 1/4W) with improved tolerance (±0.1%) in the same 0805 package. This part is applicable to designs requiring higher power handling while maintaining the 825 Ohm resistance value. The increased height (0.026" vs. 0.020" maximum) must be verified against PCB assembly clearance requirements.

All substitute parts maintain compliance with RoHS3 regulations, MSL 1 rating, and the -55°C to 155°C operating temperature range. Physical footprint compatibility (0.079" L x 0.049" W) is maintained across all alternatives.

Frequently Asked Questions (FAQ)

Q: Can RT0805DRD07825RL be used as a direct replacement for RG2012P-8250-D-T5?

A: Yes. RT0805DRD07825RL maintains identical electrical specifications (825 Ω, ±0.5% tolerance, 0.125W power rating) and package format (0805). Both parts are thin film composition with ±25ppm/°C temperature coefficient and -55°C to 155°C operating range. The primary difference is the absence of AEC-Q200 automotive qualification on the YAGEO part and a 0.004" increase in maximum seated height (0.024" vs. 0.020").

Q: What is the difference between the ±0.5% and ±0.1% tolerance options?

A: Tolerance specification defines the acceptable resistance variation from the nominal 825 Ohm value. The ±0.5% tolerance allows variation between 821.4 Ω and 828.6 Ω, while ±0.1% tolerance restricts variation to 824.2 Ω and 825.8 Ω. Applications requiring tighter resistance control should use the ±0.1% tolerance parts (RT0805BRD07825RL, ERA-6AEB8250V, or 1-2176092-0).

Q: Is the 1-2176092-0 part compatible with the original design?

A: The 1-2176092-0 is electrically compatible (825 Ω, ±0.1% tolerance, ±25ppm/°C, -55°C to 155°C) but has a higher power rating (0.25W vs. 0.125W) and increased maximum seated height (0.026" vs. 0.020"). The increased height must be verified against PCB assembly specifications and component placement clearances. The part is suitable for designs where higher power dissipation capability is beneficial or required.

Q: Does the ERA-6AEB8250V maintain automotive qualification?

A: Yes. ERA-6AEB8250V carries AEC-Q200 automotive qualification, matching the original RG2012P-8250-D-T5 specification. This part is suitable for automotive applications requiring both improved tolerance (±0.1%) and maintained automotive-grade reliability certification.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All substitute parts listed (RT0805DRD07825RL, RT0805BRD07825RL, ERA-6AEB8250V, and 1-2176092-0) are RoHS3 compliant with MSL 1 (unlimited) moisture sensitivity level, matching the original part's environmental compliance status.

Q: What is the significance of the different maximum seated heights?

A: Maximum seated height affects PCB assembly clearance and component placement density. The original RG2012P-8250-D-T5 has a 0.020" maximum height, while most substitutes range from 0.024" to 0.026". Designs with tight vertical clearance constraints must verify that substitute parts do not exceed available space above the PCB surface.