RG2012P-80R6-W-T1 Equivalent & Substitute Parts

Part Overview

The RG2012P-80R6-W-T1 is a thin film chip resistor manufactured by Susumu with a resistance value of 80.6 Ohms and a tolerance of ±0.05%. This 0805 (2012 Metric) package component is rated for 0.125W (1/8W) power dissipation and features anti-sulfur coating with AEC-Q200 automotive qualification. The part is currently classified as obsolete, necessitating identification of active equivalent and substitute components to maintain design continuity and ensure supply chain availability for new production and field service applications.

Substiute Parts

RG2012P-80R6-W-T1

SusumuIn Stock: 1147RG2012P-80R6-W-T1 Datasheet

Current PartRFQ

RG2012P-80R6-W-T5

SusumuIn Stock: 920RG2012P-80R6-W-T5 Datasheet

DirectRFQ

RG2012N-80R6-W-T1

SusumuIn Stock: 990RG2012N-80R6-W-T1 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RG2012P-80R6-W-T1 is determined by the following critical parameters:

Electrical Parameters:

• Resistance value: 80.6 Ohms (exact match required)
• Tolerance: ±0.05% (exact match required)
• Power rating: 0.125W / 1/8W (exact match required)

Mechanical Parameters:

• Package type: 0805 (2012 Metric) (exact match required)
• Physical dimensions: 0.079" L x 0.049" W / 2.00mm x 1.25mm (exact match required)
• Height - Seated (Max): 0.020" / 0.50mm (exact match required)

Environmental & Compliance Parameters:

• Composition: Thin Film (exact match required)
• Features: Anti-Sulfur, Automotive AEC-Q200 (exact match required)
• Operating temperature range: -55°C ~ 155°C (exact match required)
• RoHS Status: ROHS3 Compliant (exact match required)
• Moisture Sensitivity Level: 1 (Unlimited) (exact match required)

Substitute parts must maintain identical electrical performance, mechanical compatibility, and regulatory compliance. Packaging format (bulk versus tape & reel) does not affect functional substitution but impacts procurement and assembly processes.

Parameter Comparison

Engineering Selection Recommendations

RG2012P-80R6-W-T5 Selection Criteria:

The RG2012P-80R6-W-T5 is a direct functional equivalent to the RG2012P-80R6-W-T1. Both components share identical electrical specifications, mechanical dimensions, and environmental ratings. The primary distinction is product status: RG2012P-80R6-W-T5 maintains active production status, ensuring long-term supply availability. The packaging format difference (tape & reel versus bulk) does not affect electrical performance or circuit compatibility. This part is suitable for direct substitution in new designs and production runs where tape & reel packaging is compatible with assembly processes.

RG2012N-80R6-W-T1 Selection Criteria:

The RG2012N-80R6-W-T1 is functionally compatible with the RG2012P-80R6-W-T1 across all critical electrical and mechanical parameters. This component features an improved temperature coefficient specification of ±10ppm/°C compared to the ±25ppm/°C of the main part, providing enhanced temperature stability. Both components maintain identical resistance, tolerance, power rating, package dimensions, and AEC-Q200 automotive qualification. The RG2012N-80R6-W-T1 is available in tape & reel packaging and maintains active production status. This part is suitable for applications requiring superior temperature stability or for direct substitution where the enhanced temperature coefficient provides design margin.

Both substitute parts satisfy ROHS3 compliance, REACH unaffected status, and automotive AEC-Q200 qualification requirements. Selection between RG2012P-80R6-W-T5 and RG2012N-80R6-W-T1 depends on temperature stability requirements and packaging format compatibility with manufacturing processes.

Frequently Asked Questions (FAQ)

Q: Can RG2012P-80R6-W-T5 be used as a direct replacement for RG2012P-80R6-W-T1?

A: Yes. Both components are electrically and mechanically identical. The RG2012P-80R6-W-T5 differs only in product status (active versus obsolete) and packaging format (tape & reel versus bulk). Functional performance in the circuit is identical.

Q: What is the difference between RG2012P-80R6-W-T5 and RG2012N-80R6-W-T1?

A: The primary difference is temperature coefficient: RG2012P-80R6-W-T5 has ±25ppm/°C while RG2012N-80R6-W-T1 has ±10ppm/°C. All other electrical, mechanical, and compliance parameters are identical. The RG2012N-80R6-W-T1 provides superior temperature stability.

Q: Are the physical dimensions identical across all three parts?

A: Yes. All three components use the 0805 (2012 Metric) package with dimensions of 0.079" L x 0.049" W (2.00mm x 1.25mm) and maximum seated height of 0.020" (0.50mm). They are mechanically interchangeable on PCBs.

Q: Does packaging format (bulk versus tape & reel) affect circuit performance?

A: No. Packaging format affects procurement and assembly logistics only. Electrical and mechanical performance is identical regardless of whether the component is supplied in bulk or tape & reel format.

Q: Are all three parts AEC-Q200 qualified?

A: Yes. RG2012P-80R6-W-T1, RG2012P-80R6-W-T5, and RG2012N-80R6-W-T1 all carry AEC-Q200 automotive qualification and anti-sulfur coating.

Q: Which substitute part should be selected for new production?

A: Both RG2012P-80R6-W-T5 and RG2012N-80R6-W-T1 are active production parts suitable for new designs. Selection depends on temperature stability requirements and assembly packaging compatibility. For applications requiring enhanced temperature stability, RG2012N-80R6-W-T1 is preferred.

Q: Are all parts ROHS3 compliant?

A: Yes. RG2012P-80R6-W-T1, RG2012P-80R6-W-T5, and RG2012N-80R6-W-T1 are all ROHS3 compliant with REACH unaffected status.

Q: What is the moisture sensitivity level for these components?

A: All three parts have Moisture Sensitivity Level (MSL) 1, indicating unlimited shelf life without moisture control requirements.