RG2012P-76R8-B-T5 Equivalent & Substitute Parts

Part Overview

The RG2012P-76R8-B-T5 is a 76.8 Ohm ±0.1% thin film chip resistor manufactured by Susumu in 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation and features anti-sulfur coating with automotive AEC-Q200 qualification. The part is supplied in Tape & Reel packaging and maintains active product status. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity while maintaining electrical and mechanical compatibility within specified parameters.

Substiute Parts

RG2012P-76R8-B-T5

SusumuIn Stock: 830RG2012P-76R8-B-T5 Datasheet

Current PartRFQ

1-2176091-3

TE Connectivity Passive ProductIn Stock: 10721-2176091-3 Datasheet

DirectRFQ

ERA-6AEB76R8V

Panasonic Electronic ComponentsIn Stock: 738ERA-6AEB76R8V Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RG2012P-76R8-B-T5 are identified based on the following critical parameters that determine functional and mechanical compatibility:

Electrical Parameters (Must Match):

• Resistance value: 76.8 Ohms
• Tolerance: ±0.1%
• Temperature Coefficient: ±25ppm/°C
• Operating Temperature Range: -55°C to 155°C

Mechanical Parameters (Must Match):

• Package / Case: 0805 (2012 Metric)
• Composition: Thin Film
• Number of Terminations: 2

Compliance Parameters (Must Match or Exceed):

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Allowable Variation:

• Power Rating: Substitute parts may have equal or higher power rating (0.125W or greater)
• Packaging Format: Tape & Reel (TR) or Cut Tape (CT) formats are interchangeable
• Automotive Certification: AEC-Q200 certification is optional for substitution but present in primary and one equivalent part

Two substitute parts meet these criteria: ERA-6AEB76R8V (Panasonic) and 1-2176091-3 (TE Connectivity Passive Product).

Parameter Comparison

Engineering Selection Recommendations

Primary Equivalent: ERA-6AEB76R8V (Panasonic Electronic Components)

The ERA-6AEB76R8V provides direct electrical and mechanical equivalence to the RG2012P-76R8-B-T5. Both parts share identical resistance, tolerance, power rating, temperature coefficient, and operating temperature range. Both components carry AEC-Q200 automotive qualification and ROHS3 compliance. The ERA-6AEB76R8V is supplied in Tape & Reel format matching the original part specification. Height variation (0.024" vs. 0.020") remains within acceptable PCB assembly tolerances for 0805 package components. This part is suitable for direct substitution in automotive and industrial applications requiring AEC-Q200 certification.

Secondary Substitute: 1-2176091-3 (TE Connectivity Passive Product)

The 1-2176091-3 meets all critical electrical parameters and maintains mechanical compatibility through identical 0805 package dimensions and thin film composition. This part features a higher power rating (0.25W vs. 0.125W), providing thermal margin in applications where power dissipation may approach component limits. The part is supplied in Cut Tape format rather than Tape & Reel, requiring alternative handling procedures. The 1-2176091-3 lacks specified AEC-Q200 certification; applications requiring automotive qualification should reference the primary equivalent. Height dimension (0.026") represents the maximum variation among the three parts but remains within standard PCB assembly specifications.

Selection Criteria:

• For automotive applications requiring AEC-Q200 certification: Select ERA-6AEB76R8V
• For applications with elevated power dissipation requirements: Select 1-2176091-3
• For direct replacement with identical specifications: Select ERA-6AEB76R8V
• For packaging format compatibility: Verify Tape & Reel (TR) vs. Cut Tape (CT) requirements before selection

Frequently Asked Questions (FAQ)

Q: Can ERA-6AEB76R8V replace RG2012P-76R8-B-T5 in automotive applications?

A: Yes. The ERA-6AEB76R8V provides direct electrical equivalence with identical resistance (76.8 Ohms), tolerance (±0.1%), power rating (0.125W), temperature coefficient (±25ppm/°C), and operating temperature range (-55°C to 155°C). Both parts carry AEC-Q200 automotive qualification and ROHS3 compliance. Mechanical compatibility is confirmed through identical 0805 package dimensions.

Q: What is the difference in power rating between the substitute parts?

A: The RG2012P-76R8-B-T5 and ERA-6AEB76R8V are both rated for 0.125W (1/8W) power dissipation. The 1-2176091-3 is rated for 0.25W (1/4W), providing double the power handling capacity. In applications where the original 0.125W rating is sufficient, the higher rating of the 1-2176091-3 does not provide functional advantage but may be selected if thermal margin is desired.

Q: Are there packaging format differences between substitute parts?

A: Yes. The RG2012P-76R8-B-T5 and ERA-6AEB76R8V are supplied in Tape & Reel (TR) format. The 1-2176091-3 is supplied in Cut Tape (CT) format. Both formats are compatible with standard SMD assembly equipment, but Cut Tape format requires different handling and feeding procedures. Verify your assembly process compatibility before selecting the 1-2176091-3.

Q: Do all substitute parts meet RoHS and REACH compliance requirements?

A: The RG2012P-76R8-B-T5 and ERA-6AEB76R8V are both ROHS3 Compliant with REACH Unaffected status. The 1-2176091-3 is ROHS3 Compliant with REACH status listed as Vendor Undefined. For applications requiring confirmed REACH compliance, the RG2012P-76R8-B-T5 or ERA-6AEB76R8V are preferred selections.

Q: What is the maximum height difference between these parts?

A: The RG2012P-76R8-B-T5 has a maximum seated height of 0.020" (0.50mm). The ERA-6AEB76R8V measures 0.024" (0.60mm), and the 1-2176091-3 measures 0.026" (0.65mm). These variations remain within standard PCB assembly tolerances for 0805 components and do not affect board-level compatibility in typical applications.

Q: Can 1-2176091-3 be used in place of RG2012P-76R8-B-T5 in automotive designs?

A: The 1-2176091-3 meets all electrical and mechanical compatibility requirements. However, this part does not carry specified AEC-Q200 automotive certification. For automotive applications where AEC-Q200 qualification is a design requirement, the ERA-6AEB76R8V is the appropriate selection. The 1-2176091-3 may be used in non-automotive or applications where automotive certification is not mandated.

Q: Are the temperature coefficients identical across all three parts?

A: Yes. The RG2012P-76R8-B-T5, ERA-6AEB76R8V, and 1-2176091-3 all specify a temperature coefficient of ±25ppm/°C and an operating temperature range of -55°C to 155°C. Temperature stability characteristics are equivalent across all three parts.

Q: What is the moisture sensitivity level for these components?

A: All three parts—RG2012P-76R8-B-T5, ERA-6AEB76R8V, and 1-2176091-3—are rated at Moisture Sensitivity Level 1 (Unlimited). This classification indicates no moisture sensitivity restrictions and no special storage or handling requirements prior to assembly.