RG2012P-7680-W-T1 Equivalent & Substitute Parts

Part Overview

The RG2012P-7680-W-T1 is a 768 Ohms ±0.05% thin film chip resistor in 0805 (2012 Metric) package rated for 0.125W (1/8W) power dissipation. This component features anti-sulfur coating and automotive AEC-Q200 qualification, designed for high-precision applications requiring stable resistance values across extended temperature ranges from -55°C to 155°C.

The RG2012P-7680-W-T1 is classified as Obsolete. Equivalent and substitute parts are available from the same manufacturer series with Active product status, offering improved specifications and continued supply chain availability.

Substiute Parts

RG2012P-7680-W-T1

SusumuIn Stock: 831RG2012P-7680-W-T1 Datasheet

Current PartRFQ

RG2012P-7680-W-T5

SusumuIn Stock: 903RG2012P-7680-W-T5 Datasheet

DirectRFQ

RG2012N-7680-W-T1

SusumuIn Stock: 740RG2012N-7680-W-T1 Datasheet

UpgradeRFQ

RG2012V-7680-P-T1

SusumuIn Stock: 1167RG2012V-7680-P-T1 Datasheet

UpgradeRFQ

RG2012V-7680-W-T1

SusumuIn Stock: 989RG2012V-7680-W-T1 Datasheet

UpgradeRFQ

RG2012V-7680-W-T5

SusumuIn Stock: 689RG2012V-7680-W-T5 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RG2012P-7680-W-T1 is determined by the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 768 Ohms
• Package / Case: 0805 (2012 Metric)
• Power rating: 0.125W (1/8W)
• Composition: Thin Film
• Features: Anti-Sulfur, Automotive AEC-Q200
• Operating temperature range: -55°C ~ 155°C
• RoHS compliance: ROHS3 Compliant

Allowable Variation Parameters:

• Tolerance: ±0.05% or tighter (±0.02%)
• Temperature coefficient: ±25ppm/°C or lower (±10ppm/°C, ±5ppm/°C)
• Packaging format: Tape & Reel (TR) acceptable as equivalent to bulk packaging
• Product status: Active substitutes preferred over Obsolete

All substitute parts listed maintain identical electrical performance specifications and mechanical compatibility with the original part while offering improved or equivalent temperature stability characteristics.

Parameter Comparison

Engineering Selection Recommendations

Direct Equivalent (Identical Specifications): RG2012P-7680-W-T5 provides direct functional equivalence to the RG2012P-7680-W-T1 with identical electrical parameters (768 Ohms, ±0.05% tolerance, ±25ppm/°C temperature coefficient). The primary difference is packaging format (Tape & Reel versus bulk) and Active product status, ensuring continued availability and supply chain support.

Enhanced Performance Substitutes: The RG2012N-7680-W-T1, RG2012V-7680-W-T1, and RG2012V-7680-W-T5 offer improved temperature stability with reduced temperature coefficients (±10ppm/°C and ±5ppm/°C respectively) while maintaining all other electrical and mechanical specifications. These parts are suitable for applications requiring superior long-term stability across the full operating temperature range.

Premium Precision Substitute: The RG2012V-7680-P-T1 combines the tightest tolerance specification (±0.02%) with the lowest temperature coefficient (±5ppm/°C), delivering maximum precision performance. This part is appropriate for high-accuracy measurement and calibration circuits.

All substitute parts carry Active product status, ROHS3 compliance, AEC-Q200 automotive qualification, and identical mechanical compatibility with the original part.

Frequently Asked Questions (FAQ)

Q: Can RG2012P-7680-W-T5 be used as a direct replacement for RG2012P-7680-W-T1?

A: Yes. RG2012P-7680-W-T5 is electrically and mechanically identical to RG2012P-7680-W-T1, with the same 768 Ohms resistance, ±0.05% tolerance, and ±25ppm/°C temperature coefficient. The difference is packaging format (Tape & Reel versus bulk) and Active product status.

Q: What is the difference between the RG2012N and RG2012V series substitutes?

A: The RG2012N-7680-W-T1 features a ±10ppm/°C temperature coefficient, while RG2012V series parts feature ±5ppm/°C temperature coefficient. Both offer improved temperature stability compared to the original RG2012P part (±25ppm/°C). The RG2012V-7680-P-T1 additionally provides ±0.02% tolerance versus ±0.05% in other variants.

Q: Are all substitute parts compatible with the same PCB footprint?

A: Yes. All substitute parts use the 0805 (2012 Metric) package with identical dimensions (0.079" L × 0.049" W, 2.00mm × 1.25mm) and maximum seated height of 0.020" (0.50mm). PCB footprints are fully compatible.

Q: What does the "T1" and "T5" designation indicate in the part numbers?

A: The suffix indicates packaging format. "T1" denotes bulk packaging, while "T5" denotes Tape & Reel (TR) packaging. Both formats contain identical components; the difference is in delivery and handling configuration.

Q: Can I use RG2012V-7680-P-T1 in place of RG2012P-7680-W-T1 without circuit redesign?

A: Yes. RG2012V-7680-P-T1 is a direct mechanical and electrical substitute with superior specifications (±0.02% tolerance and ±5ppm/°C temperature coefficient). The tighter tolerance and lower temperature coefficient provide enhanced performance without requiring circuit modifications.

Q: Are all substitute parts AEC-Q200 qualified?

A: Yes. All substitute parts listed carry AEC-Q200 automotive qualification, anti-sulfur coating, and identical operating temperature range (-55°C to 155°C).

Q: What is the inventory status for substitute parts?

A: RG2012P-7680-W-T5: 803 Pcs; RG2012N-7680-W-T1: 661 Pcs; RG2012V-7680-P-T1: 1108 Pcs; RG2012V-7680-W-T1: 942 Pcs; RG2012V-7680-W-T5: 648 Pcs. All parts are in stock as new original components.