RG2012P-7680-P-T1 Equivalent & Substitute Parts

Part Overview

The RG2012P-7680-P-T1 is a 768 Ohms ±0.02% thin film chip resistor manufactured by Susumu in 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation and features anti-sulfur coating with AEC-Q200 automotive qualification. The part is currently classified as obsolete, necessitating identification of active equivalent alternatives that maintain electrical and mechanical compatibility for ongoing production and repair applications.

Substiute Parts

RG2012P-7680-P-T1

SusumuIn Stock: 965RG2012P-7680-P-T1 Datasheet

Current PartRFQ

RG2012V-7680-P-T1

SusumuIn Stock: 1167RG2012V-7680-P-T1 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RG2012P-7680-P-T1 is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Resistance value: 768 Ohms (exact match required)
• Tolerance: ±0.02% (exact match required)
• Power rating: 0.125W minimum (1/8W)
• Composition: Thin film technology

Mechanical Parameters:

• Package format: 0805 (2012 Metric)
• Physical dimensions: 0.079" L x 0.049" W (2.00mm x 1.25mm)
• Height seated maximum: 0.020" (0.50mm)
• Number of terminations: 2

Compliance & Environmental Parameters:

• AEC-Q200 automotive qualification
• Anti-sulfur coating
• Operating temperature range: -55°C ~ 155°C
• RoHS3 compliance
• Moisture sensitivity level: 1 (Unlimited)

The RG2012V-7680-P-T1 meets all substitution criteria as an active product alternative with identical electrical and mechanical specifications.

Parameter Comparison

Engineering Selection Recommendations

The RG2012V-7680-P-T1 is the direct equivalent substitute for the obsolete RG2012P-7680-P-T1. Both components are manufactured by Susumu and share identical electrical specifications, mechanical dimensions, and compliance certifications.

Selection Basis:

The RG2012V-7680-P-T1 is classified as an active product, ensuring continued availability and supply chain reliability. This substitute maintains full compatibility with existing designs specified for the RG2012P-7680-P-T1, with no circuit redesign or board layout modifications required.

The substitute component exhibits an improved temperature coefficient of ±5ppm/°C compared to the main part's ±25ppm/°C, providing enhanced temperature stability without compromising any other electrical or mechanical parameters.

Both components satisfy AEC-Q200 automotive qualification requirements, anti-sulfur coating specifications, and RoHS3 compliance mandates. The operating temperature range of -55°C to 155°C and moisture sensitivity level 1 (unlimited) are maintained across both parts.

The RG2012V-7680-P-T1 is supplied in Tape & Reel (TR) packaging format, which is standard for automated assembly processes and high-volume production environments.

Frequently Asked Questions (FAQ)

Q: Can the RG2012V-7680-P-T1 be used as a direct replacement for the RG2012P-7680-P-T1 without circuit modifications?

A: Yes. The RG2012V-7680-P-T1 is electrically and mechanically identical to the RG2012P-7680-P-T1 across all critical parameters: resistance value, tolerance, power rating, package format, and operating temperature range. No circuit redesign or board layout changes are required.

Q: What is the primary difference between these two part numbers?

A: The main difference is product status. The RG2012P-7680-P-T1 is obsolete, while the RG2012V-7680-P-T1 is active and currently in production. Additionally, the RG2012V-7680-P-T1 features a superior temperature coefficient of ±5ppm/°C compared to ±25ppm/°C for the main part.

Q: Are both parts AEC-Q200 qualified?

A: Yes. Both the RG2012P-7680-P-T1 and RG2012V-7680-P-T1 carry AEC-Q200 automotive qualification and anti-sulfur coating, making them suitable for automotive applications.

Q: What packaging format is the RG2012V-7680-P-T1 supplied in?

A: The RG2012V-7680-P-T1 is supplied in Tape & Reel (TR) packaging, which is standard for automated pick-and-place assembly processes.

Q: Do both parts meet RoHS compliance requirements?

A: Yes. Both components are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory standards.

Q: What is the moisture sensitivity level for these resistors?

A: Both parts have a moisture sensitivity level of 1 (Unlimited), indicating no special moisture control measures are required during storage or handling.

Q: Are the physical dimensions identical between the two parts?

A: Yes. Both components are packaged in 0805 (2012 Metric) format with identical dimensions of 0.079" L x 0.049" W (2.00mm x 1.25mm) and maximum seated height of 0.020" (0.50mm).