RG2012P-7150-B-T5 Equivalent & Substitute Parts

Part Overview

The RG2012P-7150-B-T5 is a 715 Ohm thin film chip resistor manufactured by Susumu, rated at 0.125W (1/8W) power dissipation in a 0805 (2012 Metric) surface mount package. This component is designed for automotive applications and carries AEC-Q200 qualification with anti-sulfur coating. The part is actively produced and available in high volume inventory. Substitute parts are identified to provide alternative sourcing options when the primary part becomes unavailable or when design requirements necessitate equivalent functionality from alternative manufacturers.

Substiute Parts

RG2012P-7150-B-T5

SusumuIn Stock: 1040RG2012P-7150-B-T5 Datasheet

Current PartRFQ

2176092-5

TE Connectivity Passive ProductIn Stock: 21812176092-5 Datasheet

DirectRFQ

ERA-6AEB7150V

Panasonic Electronic ComponentsIn Stock: 9974ERA-6AEB7150V Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RG2012P-7150-B-T5 are qualified based on the following criteria:

Mandatory Matching Parameters:

• Resistance value of 715 Ohms
• Tolerance of ±0.1%
• Package designation of 0805 (2012 Metric)
• Thin film composition
• Temperature coefficient of ±25ppm/°C
• Operating temperature range of -55°C to 155°C
• ROHS3 compliance
• MSL rating of 1 or better

Allowable Variation:

• Power rating may be equal to or greater than 0.125W
• Automotive AEC-Q200 qualification is desirable but not mandatory for all substitutes
• Manufacturer and series designation may differ

The identified substitutes meet all mandatory parameters while maintaining electrical and mechanical compatibility with the original part specification.

Parameter Comparison

Engineering Selection Recommendations

ERA-6AEB7150V (Panasonic Electronic Components)

The ERA-6AEB7150V is a direct functional equivalent to the RG2012P-7150-B-T5. Both parts share identical electrical specifications including 715 Ohm resistance, ±0.1% tolerance, 0.125W power rating, and ±25ppm/°C temperature coefficient. Both components carry AEC-Q200 automotive qualification and ROHS3 compliance. The ERA-6AEB7150V is suitable for applications requiring automotive-grade reliability and is available in high inventory volume (9,888 pieces).

2176092-5 (TE Connectivity Passive Product)

The 2176092-5 provides electrical equivalence with a higher power rating of 0.25W (1/4W) compared to the 0.125W specification of the primary part. This substitute maintains identical resistance, tolerance, temperature coefficient, and operating temperature range. The increased power rating provides additional thermal margin in applications where power dissipation headroom is beneficial. The 2176092-5 does not carry AEC-Q200 automotive qualification. This part is suitable for non-automotive applications or where the enhanced power rating is advantageous. The component is available in high inventory volume (2,155 pieces).

Frequently Asked Questions (FAQ)

Q: Can the ERA-6AEB7150V be used as a direct replacement for the RG2012P-7150-B-T5?

A: Yes. Both parts are 715 Ohm, ±0.1% tolerance, 0.125W thin film resistors in 0805 package with identical temperature coefficients and operating ranges. Both carry AEC-Q200 automotive qualification. The ERA-6AEB7150V is a direct functional equivalent.

Q: What is the difference between the RG2012P-7150-B-T5 and the 2176092-5?

A: The primary difference is power rating. The RG2012P-7150-B-T5 is rated at 0.125W (1/8W), while the 2176092-5 is rated at 0.25W (1/4W). All other electrical parameters are identical. The 2176092-5 does not carry AEC-Q200 automotive qualification.

Q: Can the 2176092-5 be used in automotive applications?

A: The 2176092-5 does not carry AEC-Q200 automotive qualification. For applications requiring automotive-grade components, the ERA-6AEB7150V or RG2012P-7150-B-T5 are the appropriate selections.

Q: Are there physical compatibility concerns when substituting these parts?

A: All three parts use the 0805 (2012 Metric) package with identical footprint dimensions of 0.079" L x 0.049" W (2.00mm x 1.25mm). Seated heights vary slightly: RG2012P-7150-B-T5 at 0.020" (0.50mm), ERA-6AEB7150V at 0.024" (0.60mm), and 2176092-5 at 0.026" (0.65mm). These height variations are within standard PCB assembly tolerances and do not affect board-level compatibility.

Q: Do all substitute parts meet RoHS and MSL requirements?

A: Yes. All three parts are ROHS3 compliant and rated at MSL 1 (Unlimited moisture sensitivity level), indicating no special moisture handling requirements during storage or assembly.

Q: What is the temperature coefficient specification and why does it matter?

A: All parts have a temperature coefficient of ±25ppm/°C, meaning the resistance value changes by a maximum of 25 parts per million for each degree Celsius change in operating temperature. This specification is critical for precision applications and must match exactly across substitutes.

Q: Can the higher power-rated 2176092-5 be used in place of the 0.125W rated parts?

A: Yes, from a thermal perspective. The 0.25W rating of the 2176092-5 provides additional thermal capacity. However, this substitute is only appropriate for non-automotive applications due to the absence of AEC-Q200 qualification.