RG2012P-6981-P-T1 Equivalent & Substitute Parts

Part Overview

The RG2012P-6981-P-T1 is a 6.98 kOhms ±0.02% thin film chip resistor in 0805 (2012 Metric) package rated for 0.125W (1/8W) power dissipation. This component features anti-sulfur coating and automotive AEC-Q200 qualification, suitable for high-precision applications requiring tight tolerance and temperature stability. The part is currently classified as obsolete, necessitating identification of active equivalent alternatives to maintain design continuity and supply chain reliability.

Substiute Parts

RG2012P-6981-P-T1

SusumuIn Stock: 1195RG2012P-6981-P-T1 Datasheet

Current PartRFQ

RG2012V-6981-P-T1

SusumuIn Stock: 1000RG2012V-6981-P-T1 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RG2012P-6981-P-T1 is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Resistance value: 6.98 kOhms (exact match required)
• Tolerance: ±0.02% (exact match required)
• Power rating: 0.125W minimum (1/8W)

Mechanical Parameters:

• Package type: 0805 (2012 Metric) form factor
• Physical dimensions: 0.079" L x 0.049" W (2.00mm x 1.25mm)
• Height seated maximum: 0.020" (0.50mm)
• Termination count: 2 leads

Compliance & Environmental Parameters:

• Composition: Thin Film construction
• Features: Anti-Sulfur coating, Automotive AEC-Q200 rating
• Operating temperature range: -55°C ~ 155°C
• RoHS3 compliance
• Moisture sensitivity level: 1 (Unlimited)

Substitute parts must satisfy all electrical, mechanical, and compliance requirements. Packaging format (Tape & Reel versus other configurations) does not affect electrical or mechanical substitutability.

Parameter Comparison

Engineering Selection Recommendations

The RG2012V-6981-P-T1 is a direct electrical and mechanical equivalent to the RG2012P-6981-P-T1. Both parts are manufactured by Susumu and share identical resistance, tolerance, power rating, package dimensions, and AEC-Q200 automotive qualification.

The RG2012V-6981-P-T1 is the preferred selection for new designs and component replacement due to its active product status. The main part (RG2012P-6981-P-T1) is obsolete and subject to supply discontinuation.

The substitute part exhibits superior temperature coefficient performance (±5ppm/°C versus ±25ppm/°C), providing enhanced temperature stability across the full operating range of -55°C to 155°C. This represents an improvement in precision characteristics while maintaining full compatibility with existing circuit designs.

Both parts satisfy ROHS3 compliance and carry unlimited moisture sensitivity rating (MSL 1), ensuring compatibility with standard manufacturing and storage protocols.

Frequently Asked Questions (FAQ)

Q: Can RG2012V-6981-P-T1 be used as a direct replacement for RG2012P-6981-P-T1?

A: Yes. Both parts are electrically and mechanically identical with respect to resistance value (6.98 kOhms), tolerance (±0.02%), power rating (0.125W), package type (0805), and all compliance certifications. The substitute part is fully compatible with existing PCB layouts and circuit designs.

Q: What is the difference between these two part numbers?

A: The primary differences are product status and temperature coefficient. The RG2012P-6981-P-T1 is obsolete, while RG2012V-6981-P-T1 is active. The substitute exhibits a temperature coefficient of ±5ppm/°C compared to ±25ppm/°C in the main part, indicating superior temperature stability.

Q: Are there packaging differences between these parts?

A: The main part (RG2012P-6981-P-T1) is supplied in standard packaging, while the substitute (RG2012V-6981-P-T1) is supplied in Tape & Reel (TR) format. Both packaging formats contain identical components with no electrical or mechanical differences. Tape & Reel packaging is standard for automated assembly processes.

Q: Do both parts meet automotive specifications?

A: Yes. Both the RG2012P-6981-P-T1 and RG2012V-6981-P-T1 carry AEC-Q200 automotive qualification and anti-sulfur coating, meeting automotive reliability and environmental requirements.

Q: What is the operating temperature range for these resistors?

A: Both parts operate across the identical temperature range of -55°C to 155°C, suitable for automotive and industrial applications requiring extended temperature performance.

Q: Are these parts RoHS compliant?

A: Yes. Both parts are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements for electronic components.