RG2012P-6341-W-T1 Equivalent & Substitute Parts

Part Overview

The RG2012P-6341-W-T1 is a 6.34 kOhms ±0.05% thin film chip resistor in 0805 (2012 Metric) package rated for 0.125W (1/8W) power dissipation. This component features anti-sulfur coating and automotive AEC-Q200 qualification, suitable for high-reliability applications requiring precision resistance values. The part is currently obsolete, necessitating identification of active equivalent and substitute components that maintain electrical and mechanical compatibility with existing designs.

Substiute Parts

RG2012P-6341-W-T1

SusumuIn Stock: 844RG2012P-6341-W-T1 Datasheet

Current PartRFQ

RG2012P-6341-W-T5

SusumuIn Stock: 768RG2012P-6341-W-T5 Datasheet

DirectRFQ

RG2012N-6341-W-T1

SusumuIn Stock: 923RG2012N-6341-W-T1 Datasheet

UpgradeRFQ

RG2012V-6341-P-T1

SusumuIn Stock: 1213RG2012V-6341-P-T1 Datasheet

UpgradeRFQ

RG2012V-6341-W-T1

SusumuIn Stock: 1107RG2012V-6341-W-T1 Datasheet

UpgradeRFQ

RG2012V-6341-W-T5

SusumuIn Stock: 756RG2012V-6341-W-T5 Datasheet

UpgradeRFQ

ERA-6AEB6341V

Panasonic Electronic ComponentsIn Stock: 13312ERA-6AEB6341V Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RG2012P-6341-W-T1 is determined by the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 6.34 kOhms
• Package type: 0805 (2012 Metric)
• Power rating: 0.125W (1/8W)
• Operating temperature range: -55°C ~ 155°C
• Composition: Thin Film
• Automotive AEC-Q200 qualification

Allowable Variation Parameters:

• Tolerance: ±0.05% or tighter (±0.02%)
• Temperature coefficient: ±25ppm/°C or lower (±10ppm/°C, ±5ppm/°C)
• Packaging format: Bulk or Tape & Reel (TR)
• Manufacturer: Susumu or equivalent qualified suppliers

Substitute parts within the Susumu RG series maintain identical electrical specifications with improved or equivalent temperature stability characteristics. The Panasonic ERA-6AEB6341V represents a cross-manufacturer alternative with compatible mechanical and electrical parameters, though with a slightly relaxed tolerance specification.

Parameter Comparison

Engineering Selection Recommendations

Direct Substitutes (Susumu RG Series):

The RG2012P-6341-W-T5 provides the most direct substitution path, maintaining identical electrical specifications to the obsolete RG2012P-6341-W-T1 with the only difference being the active product status and Tape & Reel packaging format. This part is suitable for direct replacement in existing designs without circuit re-qualification.

The RG2012N-6341-W-T1 and RG2012V series parts (RG2012V-6341-W-T1, RG2012V-6341-W-T5, RG2012V-6341-P-T1) represent upgraded alternatives within the Susumu product line. These parts offer improved temperature coefficient performance (±10ppm/°C and ±5ppm/°C respectively) while maintaining the same resistance, tolerance, power rating, and package specifications. The RG2012V-6341-P-T1 additionally provides tighter tolerance (±0.02%) for applications requiring enhanced precision.

All Susumu RG series substitutes maintain AEC-Q200 automotive qualification, ROHS3 compliance, and MSL 1 rating identical to the original part.

Cross-Manufacturer Alternative:

The Panasonic ERA-6AEB6341V is electrically compatible with matching resistance, power rating, package, and operating temperature range. This part carries AEC-Q200 qualification and ROHS3 compliance. The tolerance specification (±0.1%) is relaxed compared to the original part (±0.05%), and the temperature coefficient (±25ppm/°C) is equivalent. This component is suitable for applications where the relaxed tolerance is acceptable within circuit design margins.

Frequently Asked Questions (FAQ)

Q: Can RG2012P-6341-W-T5 be used as a direct replacement for RG2012P-6341-W-T1?

A: Yes. Both parts share identical electrical specifications: 6.34 kOhms ±0.05%, 0.125W power rating, ±25ppm/°C temperature coefficient, and 0805 package. The primary difference is packaging format (Tape & Reel versus bulk) and active product status. No circuit modifications are required.

Q: What is the advantage of using RG2012V-6341-W-T1 over RG2012P-6341-W-T5?

A: The RG2012V-6341-W-T1 offers improved temperature stability with a ±5ppm/°C temperature coefficient compared to ±25ppm/°C in the RG2012P-6341-W-T5. All other electrical parameters remain identical. This upgrade is beneficial for precision analog circuits or applications operating across wide temperature ranges where temperature-induced resistance drift must be minimized.

Q: Is the Panasonic ERA-6AEB6341V compatible with the original RG2012P-6341-W-T1?

A: The Panasonic part is mechanically and electrically compatible for most applications. It matches the 6.34 kOhms resistance, 0.125W power rating, 0805 package, and -55°C to 155°C operating range. However, the tolerance is ±0.1% compared to ±0.05% in the original part. Circuit designers must verify that the relaxed tolerance specification does not exceed design margin requirements.

Q: What does the packaging designation T1 versus T5 indicate?

A: The T1 and T5 designations refer to packaging format and tape specifications. T1 typically indicates bulk or standard packaging, while T5 indicates Tape & Reel format. Both formats contain identical components; the difference is in delivery and handling method. Tape & Reel format is standard for automated assembly processes.

Q: Are all listed substitutes AEC-Q200 qualified?

A: Yes. All substitute parts listed carry AEC-Q200 automotive qualification, matching the original RG2012P-6341-W-T1 specification. This qualification ensures reliability for automotive and high-reliability applications.

Q: Can RG2012V-6341-P-T1 be used in place of RG2012P-6341-W-T1?

A: Yes. The RG2012V-6341-P-T1 is fully compatible and represents an upgraded specification with tighter tolerance (±0.02% versus ±0.05%) and superior temperature coefficient (±5ppm/°C versus ±25ppm/°C). This part is suitable for direct substitution and provides enhanced performance characteristics for precision applications.

Q: What is the moisture sensitivity level (MSL) for all listed parts?

A: All parts, including the original and all substitutes, carry MSL 1 (Unlimited) rating. This indicates no moisture sensitivity restrictions and no special storage or handling requirements prior to soldering.