RG2012P-6341-B-T5 Equivalent & Substitute Parts

Part Overview

The RG2012P-6341-B-T5 is a 6.34 kOhms ±0.1% thin film chip resistor manufactured by Susumu in 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation and features anti-sulfur coating with automotive AEC-Q200 qualification. The part is active in production status with 767 units currently in stock. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity for applications requiring this specific resistance value and tolerance specification.

Substiute Parts

RG2012P-6341-B-T5

SusumuIn Stock: 855RG2012P-6341-B-T5 Datasheet

Current PartRFQ

8-2176092-7

TE Connectivity Passive ProductIn Stock: 27558-2176092-7 Datasheet

DirectRFQ

ERA-6AEB6341V

Panasonic Electronic ComponentsIn Stock: 13312ERA-6AEB6341V Datasheet

DirectRFQ

RT0805BRD076K34L

YAGEOIn Stock: 3319RT0805BRD076K34L Datasheet

DirectRFQ

TNPW08056K34BEEN

Vishay DaleIn Stock: 1846TNPW08056K34BEEN Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RG2012P-6341-B-T5 is determined by the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 6.34 kOhms
• Tolerance: ±0.1%
• Package: 0805 (2012 Metric)
• Composition: Thin Film
• Temperature Coefficient: ±25ppm/°C
• RoHS3 Compliance
• Moisture Sensitivity Level: 1

Allowable Variation Parameters:

• Power rating: Equal to or greater than 0.125W
• Operating temperature range: Equal to or exceeding -55°C ~ 155°C
• Automotive certification: AEC-Q200 preferred but not mandatory for all applications
• Physical height: Variation acceptable within standard 0805 package constraints

Substitute parts are grouped into two categories based on power rating compatibility:

Category A (Direct Equivalents - 0.125W Rating): ERA-6AEB6341V, RT0805BRD076K34L

Category B (Higher Power Rating - 0.25W or Greater): 8-2176092-7, TNPW08056K34BEEN

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (Identical Specifications):

ERA-6AEB6341V and RT0805BRD076K34L are direct functional equivalents to the RG2012P-6341-B-T5. Both maintain the 0.125W power rating, ±0.1% tolerance, and 0805 package format. ERA-6AEB6341V carries AEC-Q200 automotive qualification matching the main part specification. RT0805BRD076K34L does not include automotive certification but meets all electrical and mechanical parameters. ERA-6AEB6341V offers the highest inventory availability at 13,230 units.

For Applications Requiring Higher Power Dissipation:

8-2176092-7 and TNPW08056K34BEEN provide increased power ratings (0.25W and 0.26W respectively) while maintaining all other critical parameters. These parts are suitable for circuits where the main part's 0.125W rating is insufficient. TNPW08056K34BEEN extends the operating temperature range to 175°C and includes anti-sulfur coating and moisture-resistant features. 8-2176092-7 is manufactured by TE Connectivity and does not carry automotive certification.

For Automotive Applications:

ERA-6AEB6341V and TNPW08056K34BEEN both carry AEC-Q200 automotive qualification. ERA-6AEB6341V is the closest match to the main part with identical power rating and temperature range. TNPW08056K34BEEN provides enhanced temperature capability and anti-sulfur protection for demanding automotive environments.

For Standard Industrial Applications:

All substitute parts are suitable for non-automotive applications. RT0805BRD076K34L offers cost-effective substitution without automotive certification requirements.

Frequently Asked Questions (FAQ)

Q: Can ERA-6AEB6341V be used as a direct replacement for RG2012P-6341-B-T5?

A: Yes. ERA-6AEB6341V matches all critical parameters: 6.34 kOhms resistance, ±0.1% tolerance, 0.125W power rating, 0805 package, thin film composition, ±25ppm/°C temperature coefficient, and AEC-Q200 automotive qualification. Physical height variation (0.024" vs 0.020") is within acceptable 0805 package tolerances.

Q: What is the difference between the main part and RT0805BRD076K34L?

A: RT0805BRD076K34L is electrically and mechanically identical to RG2012P-6341-B-T5 except it does not carry AEC-Q200 automotive certification. For non-automotive applications, this part provides equivalent performance.

Q: When should I use 8-2176092-7 instead of the main part?

A: Use 8-2176092-7 when circuit design requires power dissipation greater than 0.125W. This part is rated for 0.25W (1/4W) while maintaining all other specifications. It does not carry automotive certification.

Q: Is TNPW08056K34BEEN suitable for high-temperature automotive applications?

A: Yes. TNPW08056K34BEEN operates to 175°C (versus 155°C for the main part), carries AEC-Q200 automotive qualification, includes anti-sulfur coating, and features moisture-resistant construction. It is rated for 0.26W power dissipation.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All listed substitute parts are ROHS3 compliant with Moisture Sensitivity Level 1 (Unlimited), matching the main part's environmental compliance status.

Q: What is the impact of physical height differences between substitute parts?

A: All substitute parts use the 0805 (2012 Metric) package with maximum seated heights ranging from 0.020" to 0.026". These variations are within standard 0805 package specifications and do not affect PCB layout or assembly compatibility for typical applications.

Q: Can I substitute a higher power-rated part in a circuit designed for 0.125W?

A: Yes. Using a higher power-rated part (0.25W or 0.26W) in a circuit designed for 0.125W is electrically safe. The resistor will operate at lower stress levels. All other electrical parameters (resistance, tolerance, temperature coefficient) remain identical.

Q: Which substitute part has the best inventory availability?

A: ERA-6AEB6341V has the highest inventory with 13,230 units in stock, followed by RT0805BRD076K34L with 3,226 units and 8-2176092-7 with 2,681 units.