RG2012P-623-D-T5 Equivalent & Substitute Parts

Part Overview

The RG2012P-623-D-T5 is a 62 kOhms ±0.5% thin film chip resistor manufactured by Susumu in 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation and features anti-sulfur coating with automotive AEC-Q200 qualification. The part is active in production status with ROHS3 compliance and unlimited moisture sensitivity level (MSL 1). Equivalent and substitute parts are identified based on matching resistance value, package format, power rating, and electrical performance characteristics within acceptable tolerance and temperature coefficient parameters.

Substiute Parts

RG2012P-623-D-T5

SusumuIn Stock: 1198RG2012P-623-D-T5 Datasheet

Current PartRFQ

RG2012P-623-B-T5

SusumuIn Stock: 5584RG2012P-623-B-T5 Datasheet

UpgradeRFQ

RT0805DRD0762KL

YAGEOIn Stock: 4170RT0805DRD0762KL Datasheet

DirectRFQ

ERA-6AEB623V

Panasonic Electronic ComponentsIn Stock: 39891ERA-6AEB623V Datasheet

UpgradeRFQ

ERA-6APB623V

Panasonic Electronic ComponentsIn Stock: 3513ERA-6APB623V Datasheet

UpgradeRFQ

ERA-6ARB623V

Panasonic Electronic ComponentsIn Stock: 5533ERA-6ARB623V Datasheet

UpgradeRFQ

ERA-6ARW623V

Panasonic Electronic ComponentsIn Stock: 1488ERA-6ARW623V Datasheet

UpgradeRFQ

RT0805BRD0762KL

YAGEOIn Stock: 3607RT0805BRD0762KL Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RG2012P-623-D-T5 is determined by the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 62 kOhms
• Package format: 0805 (2012 Metric)
• Power rating: 0.125W (1/8W)
• Composition: Thin Film
• Operating temperature range: -55°C ~ 155°C

Allowable Variation Parameters:

• Tolerance: Substitute parts with equal or tighter tolerance (±0.5%, ±0.1%, ±0.05%) are acceptable
• Temperature coefficient: Substitute parts with ±10ppm/°C, ±15ppm/°C, or ±25ppm/°C are acceptable
• Automotive rating: AEC-Q200 qualification is maintained across all substitute options
• Compliance: All parts maintain ROHS3 compliance and MSL 1 rating

Substitute parts are grouped by tolerance specification, as this parameter defines the precision class of the resistor while maintaining full electrical and mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

Direct Equivalent (Same Tolerance): RT0805DRD0762KL from YAGEO provides direct electrical equivalence with matching ±0.5% tolerance and ±25ppm/°C temperature coefficient. This part maintains the same resistance accuracy class as the RG2012P-623-D-T5. However, it does not carry AEC-Q200 automotive qualification.

Upgraded Tolerance Options (Tighter Tolerance): RG2012P-623-B-T5 from Susumu offers ±0.1% tolerance while maintaining the same manufacturer series, anti-sulfur coating, and AEC-Q200 qualification. This part provides improved precision within the same product family.

Panasonic ERA-6A Series (AEC-Q200 Qualified): ERA-6AEB623V, ERA-6APB623V, ERA-6ARB623V, and ERA-6ARW623V all provide ±0.1% or ±0.05% tolerance with AEC-Q200 automotive qualification. These parts offer progressively improved temperature coefficient performance (±25ppm/°C down to ±10ppm/°C) and are suitable for applications requiring enhanced precision and automotive compliance.

YAGEO RT0805 Series (Non-Automotive): RT0805BRD0762KL provides ±0.1% tolerance but lacks AEC-Q200 qualification. This part is suitable for non-automotive applications where automotive qualification is not required.

All substitute parts maintain 0805 package format, 0.125W power rating, ROHS3 compliance, and MSL 1 rating. Selection should be based on tolerance requirements, automotive qualification necessity, and temperature coefficient performance specifications for the target application.

Frequently Asked Questions (FAQ)

Q: Can RT0805DRD0762KL replace RG2012P-623-D-T5 in automotive applications? A: RT0805DRD0762KL matches the electrical specifications (62 kOhms, ±0.5%, 0.125W) and package format. However, it does not carry AEC-Q200 automotive qualification. Use this part only in non-automotive applications or where automotive qualification is not a design requirement.

Q: What is the difference between RG2012P-623-D-T5 and RG2012P-623-B-T5? A: Both parts are from Susumu's RG series with identical package, power rating, and AEC-Q200 qualification. The primary difference is tolerance: RG2012P-623-D-T5 has ±0.5% tolerance while RG2012P-623-B-T5 has ±0.1% tolerance. RG2012P-623-B-T5 provides tighter resistance accuracy.

Q: Are all Panasonic ERA-6A parts interchangeable with the RG2012P-623-D-T5? A: All ERA-6A variants (ERA-6AEB623V, ERA-6APB623V, ERA-6ARB623V, ERA-6ARW623V) are mechanically and electrically compatible in the 0805 package with 62 kOhms resistance and 0.125W power rating. They differ in tolerance and temperature coefficient specifications. All carry AEC-Q200 qualification.

Q: What does temperature coefficient mean and why does it vary among substitutes? A: Temperature coefficient (ppm/°C) specifies how much the resistance value changes per degree Celsius change in operating temperature. Lower values indicate better stability across temperature ranges. RG2012P-623-D-T5 has ±25ppm/°C, while ERA-6ARB623V and ERA-6ARW623V have ±10ppm/°C, providing superior temperature stability.

Q: Can I use ERA-6ARW623V (±0.05% tolerance) as a direct replacement for RG2012P-623-D-T5 (±0.5% tolerance)? A: Yes. ERA-6ARW623V has tighter tolerance (±0.05%) than the original part (±0.5%), meaning it provides equal or better resistance accuracy. It maintains the same 62 kOhms value, 0.125W power rating, 0805 package format, and AEC-Q200 qualification. The tighter tolerance makes it suitable for applications requiring higher precision.

Q: What is the significance of the 0805 package format? A: The 0805 package (2012 Metric) is a surface-mount device (SMD) format with dimensions 0.079" L × 0.049" W (2.00mm × 1.25mm). All substitute parts use this identical package format, ensuring mechanical compatibility with PCB layouts designed for the RG2012P-623-D-T5.

Q: Does ROHS3 compliance differ among the substitute parts? A: All listed substitute parts maintain ROHS3 compliance. This compliance status is consistent across all options and does not differentiate substitution suitability.

Q: What is MSL 1 (Moisture Sensitivity Level 1)? A: MSL 1 indicates unlimited shelf life without special moisture control requirements. All substitute parts carry MSL 1 rating, meaning they do not require special storage or handling conditions related to moisture exposure.