RG2012P-623-B-T5 Equivalent & Substitute Parts

Part Overview

The RG2012P-623-B-T5 is a 62 kOhms ±0.1% thin film chip resistor manufactured by Susumu in 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation and features anti-sulfur coating with automotive AEC-Q200 qualification. The part is active in production status with ROHS3 compliance and unlimited moisture sensitivity level (MSL 1). Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and automotive qualification requirements.

Substiute Parts

RG2012P-623-B-T5

SusumuIn Stock: 5584RG2012P-623-B-T5 Datasheet

Current PartRFQ

RG2012N-623-W-T1

SusumuIn Stock: 25811RG2012N-623-W-T1 Datasheet

DirectRFQ

ERA-6AEB623V

Panasonic Electronic ComponentsIn Stock: 39891ERA-6AEB623V Datasheet

DirectRFQ

RT0805BRD0762KL

YAGEOIn Stock: 3607RT0805BRD0762KL Datasheet

DirectRFQ

ERA-6APB623V

Panasonic Electronic ComponentsIn Stock: 3513ERA-6APB623V Datasheet

UpgradeRFQ

ERA-6ARB623V

Panasonic Electronic ComponentsIn Stock: 5533ERA-6ARB623V Datasheet

UpgradeRFQ

ERA-6ARW623V

Panasonic Electronic ComponentsIn Stock: 1488ERA-6ARW623V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RG2012P-623-B-T5 are classified based on the following substitution criteria:

Direct Equivalents share identical electrical specifications: 62 kOhms resistance, ±0.1% tolerance, 0.125W power rating, 0805 package, thin film composition, ±25ppm/°C temperature coefficient, -55°C to 155°C operating range, and AEC-Q200 automotive qualification. These parts are mechanically and electrically interchangeable.

Tolerance Upgrades maintain all core specifications but feature tighter tolerance ratings (±0.05% instead of ±0.1%) and lower temperature coefficients (±10ppm/°C or ±15ppm/°C instead of ±25ppm/°C). These parts provide enhanced precision and stability while remaining functionally compatible in applications where the original tolerance is acceptable.

All substitute parts maintain the following critical parameters:

• Resistance value: 62 kOhms
• Power rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thin Film
• Operating temperature: -55°C ~ 155°C
• Compliance: ROHS3, AEC-Q200, MSL 1

Parameter Comparison

Engineering Selection Recommendations

Direct Equivalent Selection: ERA-6AEB623V (Panasonic) and RT0805BRD0762KL (YAGEO) are direct electrical equivalents to RG2012P-623-B-T5, matching all core specifications including 62 kOhms resistance, ±0.1% tolerance, 0.125W power rating, and ±25ppm/°C temperature coefficient. Both parts maintain 0805 package compatibility and ROHS3 compliance. ERA-6AEB623V carries AEC-Q200 automotive qualification matching the original part. RT0805BRD0762KL provides equivalent electrical performance without automotive-specific features.

Susumu Series Upgrade: RG2012N-623-W-T1 (Susumu) offers tighter tolerance (±0.05%) and improved temperature coefficient (±10ppm/°C) while maintaining the same manufacturer lineage, 0805 package, anti-sulfur coating, and AEC-Q200 rating. This part is suitable for applications requiring enhanced precision. Inventory availability is significantly higher (25795 pcs).

Panasonic ERA-6A Series Options: The Panasonic ERA-6A family provides multiple precision grades. ERA-6ARB623V and ERA-6ARW623V both feature ±10ppm/°C temperature coefficients with AEC-Q200 qualification. ERA-6ARW623V offers the tightest tolerance (±0.05%) among Panasonic options. ERA-6APB623V provides intermediate performance with ±15ppm/°C temperature coefficient. All Panasonic parts feature 0.60mm maximum seated height compared to 0.50mm for Susumu parts.

Compliance Verification: All substitute parts maintain ROHS3 compliance, MSL 1 rating, and -55°C to 155°C operating temperature range. AEC-Q200 automotive qualification is present in all Susumu and Panasonic parts. Selection should prioritize parts matching the original AEC-Q200 requirement for automotive applications.

Frequently Asked Questions (FAQ)

Q: Can RT0805BRD0762KL replace RG2012P-623-B-T5 in automotive applications?

A: RT0805BRD0762KL provides electrical equivalence with matching 62 kOhms resistance, ±0.1% tolerance, and 0.125W power rating. However, this YAGEO part does not carry AEC-Q200 automotive qualification. For applications requiring automotive-grade components, ERA-6AEB623V or ERA-6ARB623V are preferred alternatives.

Q: What is the difference between RG2012P-623-B-T5 and RG2012N-623-W-T1?

A: Both are Susumu 62 kOhms thin film resistors in 0805 package with anti-sulfur coating and AEC-Q200 rating. RG2012N-623-W-T1 features tighter tolerance (±0.05% vs ±0.1%) and lower temperature coefficient (±10ppm/°C vs ±25ppm/°C). The original part is suitable for standard precision applications, while RG2012N-623-W-T1 is specified for higher precision requirements.

Q: Are there height differences between substitute parts?

A: Yes. RG2012P-623-B-T5 and RG2012N-623-W-T1 (both Susumu) have maximum seated height of 0.50mm. Panasonic ERA-6A series parts (ERA-6AEB623V, ERA-6APB623V, ERA-6ARB623V, ERA-6ARW623V) and YAGEO RT0805BRD0762KL have maximum seated height of 0.60mm. This 0.10mm difference must be considered in PCB layout and assembly clearance verification.

Q: Which substitute offers the best temperature stability?

A: ERA-6ARW623V and RG2012N-623-W-T1 both feature ±10ppm/°C temperature coefficient, the lowest among available substitutes. ERA-6ARB623V also provides ±10ppm/°C performance. The original RG2012P-623-B-T5 and most direct equivalents operate at ±25ppm/°C.

Q: Is anti-sulfur coating available in all substitutes?

A: Anti-sulfur coating is specified only for Susumu parts (RG2012P-623-B-T5 and RG2012N-623-W-T1). Panasonic ERA-6A series and YAGEO RT0805BRD0762KL do not list anti-sulfur coating as a feature. For applications requiring sulfur resistance, Susumu parts are the appropriate selection.

Q: Can I use ERA-6ARW623V as a direct replacement?

A: ERA-6ARW623V is electrically compatible with enhanced specifications: ±0.05% tolerance and ±10ppm/°C temperature coefficient compared to the original ±0.1% and ±25ppm/°C. The 0.60mm seated height versus 0.50mm must be verified for PCB clearance. This part carries AEC-Q200 automotive qualification and ROHS3 compliance, making it suitable for automotive applications requiring improved precision.

Q: What inventory considerations apply to substitute selection?

A: RG2012N-623-W-T1 offers the highest inventory (25795 pcs), followed by ERA-6AEB623V (39799 pcs). The original RG2012P-623-B-T5 has 5555 pcs available. ERA-6ARW623V has the lowest inventory (1390 pcs). Inventory levels should be considered for production volume and lead time requirements.