RG2012P-6042-C-T5 Equivalent & Substitute Parts

Part Overview

The RG2012P-6042-C-T5 is a 60.4 kOhms ±0.25% thin film chip resistor in 0805 (2012 Metric) package rated for 0.125W (1/8W) power dissipation. Manufactured by Susumu, this component features anti-sulfur coating and automotive AEC-Q200 qualification, suitable for high-reliability applications across -55°C to 155°C operating temperature range.

The RG2012P-6042-C-T5 is classified as obsolete. Equivalent and substitute parts are necessary to maintain design continuity and ensure component availability for production and repair applications. Substitute components must maintain electrical compatibility while meeting or exceeding the original specifications.

Key Parameters

Parameter	Value
Resistance	60.4 kOhms
Tolerance	±0.25%
Power Rating	0.125W (1/8W)
Package	0805 (2012 Metric)
Composition	Thin Film
Temperature Coefficient	±25ppm/°C
Operating Temperature Range	-55°C to 155°C
Features	Anti-Sulfur, Automotive AEC-Q200
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the RG2012P-6042-C-T5 is determined by the following critical parameters:

Electrical Compatibility Requirements:

Resistance value: 60.4 kOhms (exact match required)
Tolerance: ±0.25% or better (lower tolerance values are acceptable)
Power rating: 0.125W minimum (higher power ratings are acceptable)
Temperature coefficient: ±25ppm/°C or better (lower values are acceptable)
Operating temperature range: -55°C to 155°C minimum (extended ranges are acceptable)

Mechanical Compatibility Requirements:

Package: 0805 (2012 Metric) form factor (exact match required)
Composition: Thin film construction (required for precision specifications)
Termination: 2-terminal configuration (exact match required)

Compliance Requirements:

RoHS3 compliance (mandatory for environmental standards)
Moisture sensitivity level: 1 (Unlimited) or equivalent
AEC-Q200 automotive qualification (preferred for automotive applications)

Substitute parts are grouped into two categories: Upgrade parts offering improved tolerance or temperature coefficient specifications while maintaining backward compatibility, and Direct equivalents providing comparable electrical and mechanical characteristics from alternative manufacturers.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Temp Coeff (ppm/°C)	Temp Range (°C)	AEC-Q200	Product Status
RG2012P-6042-C-T5	Susumu	60.4 kΩ	±0.25%	0.125	±25	-55 to 155	Yes	Obsolete
RG2012N-6042-B-T5	Susumu	60.4 kΩ	±0.1%	0.125	±10	-55 to 155	Yes	Active
RG2012N-6042-W-T1	Susumu	60.4 kΩ	±0.05%	0.125	±10	-55 to 155	Yes	Active
RG2012P-6042-B-T5	Susumu	60.4 kΩ	±0.1%	0.125	±25	-55 to 155	Yes	Active
RG2012P-6042-W-T5	Susumu	60.4 kΩ	±0.05%	0.125	±25	-55 to 155	Yes	Active
7-2176093-4	TE Connectivity Passive Product	60.4 kΩ	±0.1%	0.25	±25	-55 to 155	No	Active
RT0805CRD0760K4L	YAGEO	60.4 kΩ	±0.25%	0.125	±25	-55 to 155	No	Active
ERA-6AEB6042V	Panasonic Electronic Components	60.4 kΩ	±0.1%	0.125	±25	-55 to 155	Yes	Active
MCU08050D6042BP500	Vishay Beyschlag/Draloric/BC Components	60.4 kΩ	±0.1%	0.125	±25	-55 to 125	No	Active
RP73D2A60K4BTDF	TE Connectivity Passive Product	60.4 kΩ	±0.1%	0.125	±15	-55 to 155	No	Active
RT0805BRD0760K4L	YAGEO	60.4 kΩ	±0.1%	0.125	±25	-55 to 155	No	Active

Engineering Selection Recommendations

Primary Substitutes (Susumu RG Series - Same Manufacturer):

The Susumu RG2012P-6042-B-T5 and RG2012N-6042-B-T5 are the preferred substitutes for the obsolete RG2012P-6042-C-T5. Both parts maintain the same 0805 package, 0.125W power rating, and -55°C to 155°C operating temperature range. The RG2012P-6042-B-T5 offers improved tolerance (±0.1% versus ±0.25%) while maintaining identical temperature coefficient and AEC-Q200 automotive qualification. The RG2012N-6042-B-T5 provides superior temperature coefficient performance (±10ppm/°C versus ±25ppm/°C) with tighter tolerance specification. Both parts are active products with established supply chains.

Secondary Substitutes (Automotive AEC-Q200 Qualified):

The Panasonic ERA-6AEB6042V provides direct electrical and mechanical compatibility with AEC-Q200 automotive qualification. This part matches the original specifications with ±0.1% tolerance and maintains the full -55°C to 155°C operating range. High inventory availability (13,510 units) supports production requirements.

Alternative Substitutes (Non-Automotive):

The YAGEO RT0805BRD0760K4L and RT0805CRD0760K4L provide electrical compatibility in the 0805 package with active product status. The RT0805BRD0760K4L offers ±0.1% tolerance, while the RT0805CRD0760K4L matches the original ±0.25% tolerance specification. These parts lack AEC-Q200 qualification and are suitable for non-automotive applications.

The TE Connectivity RP73D2A60K4BTDF offers superior temperature coefficient performance (±15ppm/°C) with ±0.1% tolerance and full temperature range support, though without automotive qualification.

The TE Connectivity 7-2176093-4 provides higher power rating (0.25W) in the same package, suitable for applications requiring increased power dissipation margin.

Temperature Range Consideration:

The Vishay MCU08050D6042BP500 operates to 125°C maximum, which is below the original specification of 155°C. This part is suitable only for applications with maximum operating temperature not exceeding 125°C.

Frequently Asked Questions (FAQ)

Q: Can I use a substitute part with lower tolerance (e.g., ±0.1% instead of ±0.25%)?

A: Yes. Lower tolerance specifications represent tighter manufacturing control and are directly compatible with designs requiring the original ±0.25% tolerance. The substitute part will meet or exceed the original tolerance requirement.

Q: What is the difference between Susumu RG2012P and RG2012N series parts?

A: The RG2012N series offers improved temperature coefficient performance (±10ppm/°C versus ±25ppm/°C for RG2012P). Both series maintain identical resistance, power rating, and package specifications. Selection depends on circuit requirements for temperature stability.

Q: Is AEC-Q200 qualification required for my application?

A: AEC-Q200 qualification is mandatory for automotive applications and recommended for high-reliability industrial applications. Non-automotive consumer applications may use non-qualified alternatives. Verify application requirements before selecting a substitute.

Q: Can I use the TE Connectivity 7-2176093-4 (0.25W) as a direct replacement for the 0.125W original part?

A: Yes. The higher power rating (0.25W versus 0.125W) provides additional thermal margin and is mechanically and electrically compatible. The 0805 package dimensions remain identical. This substitution is suitable for all applications using the original part.

Q: What is the difference between the YAGEO RT0805CRD0760K4L and RT0805BRD0760K4L?

A: The RT0805CRD0760K4L maintains the original ±0.25% tolerance specification, while the RT0805BRD0760K4L offers improved ±0.1% tolerance. Both parts are electrically and mechanically compatible with identical package, power rating, and temperature range specifications.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All listed substitute parts are RoHS3 compliant, meeting current environmental and regulatory requirements for electronic component manufacturing and use.

Q: Can I use the Vishay MCU08050D6042BP500 in a circuit operating at 155°C?

A: No. The Vishay MCU08050D6042BP500 is rated to 125°C maximum operating temperature. Use this part only in applications with maximum operating temperature not exceeding 125°C. For full -55°C to 155°C range support, select alternative substitutes.

Q: What is the moisture sensitivity level for all substitute parts?

A: All substitute parts listed maintain MSL 1 (Unlimited) moisture sensitivity level, identical to the original RG2012P-6042-C-T5. No special moisture control measures are required during storage or handling.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message