RG2012P-6041-W-T1 Equivalent & Substitute Parts

Part Overview

The RG2012P-6041-W-T1 is a 6.04 kOhms ±0.05% thin film chip resistor in 0805 (2012 Metric) package rated for 0.125W (1/8W) power dissipation. This component features anti-sulfur construction and automotive AEC-Q200 qualification, suitable for high-reliability applications requiring precision resistance values and temperature stability across -55°C to 155°C operating range.

The RG2012P-6041-W-T1 is classified as obsolete. Equivalent and substitute parts are available from the same manufacturer series with active product status, offering improved specifications or alternative packaging configurations while maintaining core electrical and mechanical compatibility.

Substiute Parts

RG2012P-6041-W-T1

SusumuIn Stock: 930RG2012P-6041-W-T1 Datasheet

Current PartRFQ

RG2012P-6041-W-T5

SusumuIn Stock: 1030RG2012P-6041-W-T5 Datasheet

DirectRFQ

RG2012N-6041-W-T1

SusumuIn Stock: 900RG2012N-6041-W-T1 Datasheet

UpgradeRFQ

RG2012V-6041-P-T1

SusumuIn Stock: 831RG2012V-6041-P-T1 Datasheet

UpgradeRFQ

RG2012V-6041-W-T1

SusumuIn Stock: 728RG2012V-6041-W-T1 Datasheet

UpgradeRFQ

RG2012V-6041-W-T5

SusumuIn Stock: 1124RG2012V-6041-W-T5 Datasheet

UpgradeRFQ

RG2012P-6041-B-T5

SusumuIn Stock: 9171RG2012P-6041-B-T5 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RG2012P-6041-W-T1 is determined by the following critical parameters:

Mandatory Compatibility Parameters:

• Resistance value: 6.04 kOhms (exact match required)
• Package / Case: 0805 (2012 Metric) (exact match required)
• Power rating: 0.125W (1/8W) (exact match required)
• Composition: Thin Film (exact match required)
• Features: Anti-Sulfur, Automotive AEC-Q200 (exact match required)
• Operating temperature range: -55°C ~ 155°C (exact match required)
• RoHS and REACH compliance status (exact match required)

Allowable Variation Parameters:

• Tolerance: May be equal or tighter (±0.05% or better)
• Temperature coefficient: May be equal or lower (±25ppm/°C or better)
• Packaging format: Tape & Reel (TR) acceptable as alternative to standard packaging
• Product status: Active status preferred over obsolete

Substitute parts are grouped into two categories: Direct substitutes (identical electrical specifications with packaging or format variations) and upgrade substitutes (improved specifications such as tighter tolerance or lower temperature coefficient).

Parameter Comparison

Engineering Selection Recommendations

Direct Substitutes (Identical Electrical Specifications):

RG2012P-6041-W-T5 is a direct substitute for RG2012P-6041-W-T1. Both parts maintain identical resistance, tolerance, power rating, and temperature coefficient specifications. The primary difference is packaging format (Tape & Reel versus standard) and active product status. This part is suitable for direct replacement in production environments where Tape & Reel packaging is compatible with assembly processes.

Upgrade Substitutes (Improved Specifications):

RG2012N-6041-W-T1 provides improved temperature coefficient performance (±10ppm/°C versus ±25ppm/°C) while maintaining all other electrical parameters. This upgrade is applicable in applications requiring enhanced temperature stability.

RG2012V-6041-W-T1 and RG2012V-6041-W-T5 both provide superior temperature coefficient performance (±5ppm/°C) with identical tolerance and resistance specifications. These upgrades are suitable for precision applications requiring minimal thermal drift.

RG2012V-6041-P-T1 provides the highest specification upgrade with ±0.02% tolerance and ±5ppm/°C temperature coefficient, exceeding the original part's precision requirements.

Similar Part (Relaxed Tolerance):

RG2012P-6041-B-T5 maintains identical resistance, power rating, and temperature coefficient but features relaxed tolerance (±0.1% versus ±0.05%). This part is suitable only in applications where the wider tolerance specification is acceptable.

All substitute parts maintain AEC-Q200 automotive qualification, anti-sulfur construction, ROHS3 compliance, and identical operating temperature range. Selection should be based on specific application requirements for tolerance, temperature stability, and packaging format compatibility.

Frequently Asked Questions (FAQ)

Q: Can RG2012P-6041-W-T5 be used as a direct replacement for RG2012P-6041-W-T1?

A: Yes. RG2012P-6041-W-T5 is electrically identical to RG2012P-6041-W-T1, with matching resistance (6.04 kOhms), tolerance (±0.05%), power rating (0.125W), and temperature coefficient (±25ppm/°C). The primary difference is packaging format (Tape & Reel). Both parts are suitable for identical circuit applications.

Q: What is the difference between the "P" and "V" designations in the part numbers?

A: The part number designations reflect internal Susumu series classifications. The "P" series (RG2012P) and "V" series (RG2012V) differ in temperature coefficient performance. The "V" series provides superior temperature stability (±5ppm/°C) compared to the "P" series (±25ppm/°C), while maintaining identical resistance and tolerance specifications.

Q: Are all substitute parts available in Tape & Reel packaging?

A: Yes. All listed substitute parts are supplied in Tape & Reel (TR) packaging format. The original RG2012P-6041-W-T1 was supplied in standard packaging. Tape & Reel format is standard for high-volume production assembly and is compatible with automated pick-and-place equipment.

Q: Can RG2012P-6041-B-T5 be used as a substitute?

A: RG2012P-6041-B-T5 is compatible from a mechanical and thermal standpoint but features relaxed tolerance (±0.1% versus ±0.05%). This part is suitable only in applications where the wider tolerance specification does not compromise circuit performance or design margins.

Q: What is the significance of the "T1" and "T5" suffixes?

A: The "T1" and "T5" suffixes indicate different tape specifications for Tape & Reel packaging. Both are compatible with standard SMD assembly equipment. Selection between T1 and T5 should be based on specific assembly line equipment compatibility and tape specifications required by manufacturing processes.

Q: Are all substitute parts AEC-Q200 qualified?

A: Yes. All listed substitute parts maintain AEC-Q200 automotive qualification, anti-sulfur construction, and identical operating temperature range (-55°C to 155°C). All parts are ROHS3 compliant and REACH unaffected.

Q: Which substitute part offers the best temperature stability?

A: RG2012V-6041-P-T1 and RG2012V-6041-W-T1 both offer the lowest temperature coefficient (±5ppm/°C). RG2012V-6041-P-T1 additionally provides the tightest tolerance specification (±0.02%). Selection between these parts depends on whether the enhanced tolerance specification is required for the application.