RG2012P-561-B-T5 Equivalent & Substitute Parts

Part Overview

The RG2012P-561-B-T5 is a 560 Ohm ±0.1% thin film chip resistor manufactured by Susumu in 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation and is designed for automotive applications with AEC-Q200 qualification. The part features anti-sulfur construction and operates across the temperature range of -55°C to 155°C. This resistor is currently in active production status with 5679 units in stock.

Equivalent and substitute parts are identified when component availability is limited, supply chain disruptions occur, or design requirements necessitate alternative sourcing from qualified manufacturers while maintaining electrical and mechanical compatibility.

Substiute Parts

RG2012P-561-B-T5

SusumuIn Stock: 5763RG2012P-561-B-T5 Datasheet

Current PartRFQ

RG2012N-561-W-T1

SusumuIn Stock: 1708RG2012N-561-W-T1 Datasheet

DirectRFQ

ERA-6AEB561V

Panasonic Electronic ComponentsIn Stock: 17222ERA-6AEB561V Datasheet

DirectRFQ

RT0805BRD07560RL

YAGEOIn Stock: 6083RT0805BRD07560RL Datasheet

DirectRFQ

TNPW0805560RBEEA

Vishay DaleIn Stock: 5679TNPW0805560RBEEA Datasheet

DirectRFQ

ERA-6APB561V

Panasonic Electronic ComponentsIn Stock: 3297ERA-6APB561V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RG2012P-561-B-T5 is determined by the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 560 Ohms
• Package / Case: 0805 (2012 Metric)
• Composition: Thin Film
• Power rating: 0.125W (1/8W) minimum
• Operating temperature range: -55°C ~ 155°C minimum
• Automotive AEC-Q200 qualification
• RoHS3 compliance
• Moisture Sensitivity Level: 1

Allowable Variations:

• Tolerance: ±0.1% or tighter (±0.05% acceptable)
• Temperature coefficient: ±25ppm/°C or better
• Manufacturer: Different qualified suppliers acceptable
• Height - Seated: Variations within 0.020" to 0.024" acceptable
• Anti-sulfur feature: Present or absent (not mandatory for substitution)

Substitute parts must maintain identical electrical performance in the 560 Ohm resistance value and support the same automotive and compliance requirements. Physical dimensions must remain compatible with 0805 package specifications.

Parameter Comparison

Engineering Selection Recommendations

Direct Equivalents (Identical Specifications):

ERA-6AEB561V (Panasonic) and ERA-6APB561V (Panasonic) are direct functional equivalents to the RG2012P-561-B-T5. Both parts maintain 560 Ohm resistance, ±0.1% tolerance, 0.125W power rating, 0805 package, AEC-Q200 automotive qualification, and ROHS3 compliance. ERA-6AEB561V offers the highest inventory availability at 17167 units. ERA-6APB561V provides improved temperature coefficient performance at ±15ppm/°C compared to the main part's ±25ppm/°C.

Enhanced Tolerance Alternative:

RG2012N-561-W-T1 (Susumu) provides tighter tolerance at ±0.05% and superior temperature coefficient at ±10ppm/°C while maintaining all other critical specifications. This part is suitable for applications requiring higher precision. Inventory availability is 1661 units.

Higher Power Rating Alternative:

TNPW0805560RBEEA (Vishay Dale) offers increased power dissipation capability at 0.26W compared to the standard 0.125W rating. This part maintains all automotive and compliance requirements and extends the operating temperature range to 175°C. Inventory availability is 5592 units.

Non-Automotive Alternative:

RT0805BRD07560RL (YAGEO) matches all electrical and package specifications but lacks AEC-Q200 automotive qualification. This part is suitable only for non-automotive applications. Inventory availability is 6028 units.

Frequently Asked Questions (FAQ)

Q: Can I substitute ERA-6AEB561V for RG2012P-561-B-T5 in automotive applications?

A: Yes. ERA-6AEB561V maintains identical resistance (560 Ohms), tolerance (±0.1%), power rating (0.125W), package (0805), operating temperature range (-55°C ~ 155°C), and AEC-Q200 automotive qualification. The parts are functionally equivalent for automotive circuit applications.

Q: What is the difference between RG2012N-561-W-T1 and RG2012P-561-B-T5?

A: RG2012N-561-W-T1 provides tighter tolerance (±0.05% versus ±0.1%) and better temperature coefficient (±10ppm/°C versus ±25ppm/°C). Both are Susumu thin film resistors in 0805 package with AEC-Q200 qualification. The RG2012N variant is suitable for precision applications requiring tighter tolerance control.

Q: Is TNPW0805560RBEEA a suitable replacement for the main part?

A: TNPW0805560RBEEA is suitable for applications requiring higher power dissipation. It provides 0.26W rating compared to the standard 0.125W, maintains 560 Ohm resistance, ±0.1% tolerance, 0805 package, and AEC-Q200 qualification. The extended operating temperature range to 175°C provides additional thermal margin.

Q: Why does RT0805BRD07560RL not have AEC-Q200 qualification?

A: RT0805BRD07560RL is manufactured by YAGEO and does not carry AEC-Q200 automotive qualification. This part is suitable only for non-automotive applications. For automotive circuits, use ERA-6AEB561V, ERA-6APB561V, RG2012N-561-W-T1, or TNPW0805560RBEEA.

Q: Are all substitute parts compatible with the same PCB layout?

A: All substitute parts use the 0805 (2012 Metric) package with identical footprint dimensions of 0.079" L x 0.049" W (2.00mm x 1.25mm). Height variations range from 0.020" to 0.024" maximum seated height, which remain within standard PCB assembly tolerances for 0805 components.

Q: Which substitute part offers the best temperature stability?

A: RG2012N-561-W-T1 offers the best temperature stability with ±10ppm/°C temperature coefficient. ERA-6APB561V provides ±15ppm/°C. Both are superior to the main part's ±25ppm/°C specification.

Q: Can I use these parts interchangeably in high-reliability applications?

A: All substitute parts listed maintain ROHS3 compliance, Moisture Sensitivity Level 1, and identical electrical specifications. Parts with AEC-Q200 qualification (ERA-6AEB561V, ERA-6APB561V, RG2012N-561-W-T1, TNPW0805560RBEEA) are suitable for automotive and high-reliability applications. RT0805BRD07560RL lacks AEC-Q200 qualification and is not suitable for high-reliability automotive use.