RG2012P-5360-W-T1 Equivalent & Substitute Parts

Part Overview

The RG2012P-5360-W-T1 is a 536 Ohm ±0.05% thin film chip resistor manufactured by Susumu in the 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation and features anti-sulfur coating with automotive AEC-Q200 qualification. The part is currently listed as obsolete, necessitating identification of equivalent and substitute components for ongoing design support and production requirements. Active alternatives are available from both Susumu and cross-manufacturer sources that maintain electrical and mechanical compatibility.

Substiute Parts

RG2012P-5360-W-T1

SusumuIn Stock: 828RG2012P-5360-W-T1 Datasheet

Current PartRFQ

RG2012P-5360-W-T5

SusumuIn Stock: 768RG2012P-5360-W-T5 Datasheet

DirectRFQ

RG2012N-5360-W-T1

SusumuIn Stock: 720RG2012N-5360-W-T1 Datasheet

UpgradeRFQ

RG2012V-5360-P-T1

SusumuIn Stock: 1017RG2012V-5360-P-T1 Datasheet

UpgradeRFQ

RG2012V-5360-W-T1

SusumuIn Stock: 710RG2012V-5360-W-T1 Datasheet

UpgradeRFQ

RG2012V-5360-W-T5

SusumuIn Stock: 939RG2012V-5360-W-T5 Datasheet

UpgradeRFQ

ERA-6AEB5360V

Panasonic Electronic ComponentsIn Stock: 8269ERA-6AEB5360V Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RG2012P-5360-W-T1 is determined by the following critical parameters:

Mandatory Compatibility Parameters:

• Resistance value: 536 Ohms (exact match required)
• Package / Case: 0805 (2012 Metric) (physical and electrical footprint compatibility)
• Power rating: 0.125W (1/8W) minimum (thermal performance requirement)
• Operating temperature range: -55°C ~ 155°C (environmental specification)
• Automotive AEC-Q200 rating (quality and reliability standard)
• RoHS3 compliance (regulatory requirement)

Allowable Variation Parameters:

• Tolerance: ±0.05% or tighter (±0.02% acceptable as upgrade)
• Temperature coefficient: ±25ppm/°C or lower (±10ppm/°C or ±5ppm/°C acceptable as upgrade)
• Packaging format: Tape & Reel (TR) acceptable as alternative to bulk
• Manufacturer: Cross-manufacturer substitution permitted if all mandatory parameters met

Substitution Categories:

Direct Substitutes (Susumu RG Series): Parts with identical electrical specifications and packaging, differing only in packaging format (bulk vs. Tape & Reel) or product status (active vs. obsolete).

Upgrade Substitutes (Susumu RG Series): Parts with improved temperature coefficient or tolerance specifications while maintaining all mandatory parameters.

Cross-Manufacturer Substitutes (Panasonic ERA-6A Series): Parts meeting all mandatory parameters with tolerance specification of ±0.1% (wider than original ±0.05% but within acceptable range for most applications).

Parameter Comparison

Engineering Selection Recommendations

Primary Recommendation: RG2012P-5360-W-T5

The RG2012P-5360-W-T5 is the direct functional equivalent of the RG2012P-5360-W-T1. Both parts share identical electrical specifications (536 Ohms ±0.05%, 0.125W, ±25ppm/°C temperature coefficient) and mechanical dimensions. The primary difference is packaging format: RG2012P-5360-W-T5 is supplied in Tape & Reel format, while the original part was supplied in bulk. This part is currently in active production status with 671 units in stock.

Secondary Recommendation: RG2012V-5360-W-T1 or RG2012V-5360-W-T5

These Susumu parts offer improved temperature coefficient performance (±5ppm/°C versus ±25ppm/°C) while maintaining all other electrical and mechanical specifications. Both are active products suitable for applications requiring enhanced thermal stability. RG2012V-5360-W-T1 is supplied in Tape & Reel format with 628 units in stock. RG2012V-5360-W-T5 is also supplied in Tape & Reel format with 897 units in stock.

Tertiary Recommendation: RG2012N-5360-W-T1

This Susumu part provides intermediate temperature coefficient performance (±10ppm/°C) and maintains all other specifications. It is an active product with 655 units in stock, supplied in Tape & Reel format.

Premium Upgrade Option: RG2012V-5360-P-T1

This Susumu part offers the tightest tolerance specification (±0.02%) and lowest temperature coefficient (±5ppm/°C) among all substitutes. It is suitable for precision applications requiring enhanced accuracy. This part is active with 944 units in stock.

Cross-Manufacturer Alternative: ERA-6AEB5360V

The Panasonic ERA-6AEB5360V is a functionally compatible alternative from a different manufacturer. It maintains the 536 Ohm resistance, 0.125W power rating, 0805 package, and AEC-Q200 automotive qualification. The tolerance specification is ±0.1% (wider than the original ±0.05%), and the temperature coefficient is ±25ppm/°C (matching the original). The seated height is 0.024" (0.60mm) versus 0.020" (0.50mm) for Susumu parts, which may require PCB layout verification in space-constrained applications. This part is active with 8230 units in stock.

All substitute parts maintain ROHS3 compliance, MSL 1 rating, and automotive AEC-Q200 qualification. Selection should be based on specific application requirements for tolerance, temperature coefficient, and physical clearance constraints.

Frequently Asked Questions (FAQ)

Q: Can RG2012P-5360-W-T5 be used as a direct replacement for RG2012P-5360-W-T1?

A: Yes. Both parts have identical electrical specifications (536 Ohms ±0.05%, 0.125W, ±25ppm/°C) and mechanical dimensions (0805 package, 0.020" max seated height). The only difference is packaging format: RG2012P-5360-W-T5 is supplied in Tape & Reel format. Electrical and thermal performance are equivalent.

Q: What is the difference between the Susumu RG series substitutes?

A: The primary differences are temperature coefficient and tolerance specifications. RG2012P-5360-W-T1/T5 have ±25ppm/°C temperature coefficient and ±0.05% tolerance. RG2012N-5360-W-T1 has ±10ppm/°C temperature coefficient and ±0.05% tolerance. RG2012V series parts have ±5ppm/°C temperature coefficient with either ±0.05% tolerance (W designation) or ±0.02% tolerance (P designation). All maintain identical resistance value, power rating, and package dimensions.

Q: Is the Panasonic ERA-6AEB5360V compatible with the original part?

A: The ERA-6AEB5360V is electrically and mechanically compatible for most applications. It maintains the 536 Ohm resistance, 0.125W power rating, 0805 package, and AEC-Q200 automotive qualification. The tolerance is ±0.1% (versus ±0.05% original), and the seated height is 0.024" (versus 0.020" original). PCB layout verification is required to confirm adequate clearance for the additional 0.004" height.

Q: What does the temperature coefficient specification mean for substitution?

A: Temperature coefficient indicates how much the resistance value changes with temperature. A lower temperature coefficient (±5ppm/°C) means the resistance remains more stable across the operating temperature range (-55°C to 155°C) compared to a higher coefficient (±25ppm/°C). Parts with lower temperature coefficients are suitable as upgrades for applications requiring enhanced thermal stability.

Q: Can I substitute a part with tighter tolerance (±0.02%) for one with ±0.05% tolerance?

A: Yes. A tighter tolerance specification is a valid upgrade. The RG2012V-5360-P-T1 with ±0.02% tolerance can replace the original ±0.05% part. The component will perform within the original specification while providing additional accuracy margin.

Q: What is the significance of the "Anti-Sulfur" feature?

A: Anti-sulfur coating protects the resistor from corrosion in environments with hydrogen sulfide exposure. This feature is present in all Susumu RG series substitutes but is not specified for the Panasonic ERA-6AEB5360V. For applications in corrosive environments, Susumu parts are preferred.

Q: Are all substitute parts AEC-Q200 qualified?

A: Yes. All listed substitute parts carry automotive AEC-Q200 qualification, matching the original part. This certification ensures compliance with automotive reliability and quality standards.

Q: What does the packaging designation "T1" versus "T5" mean?

A: The "T" designation followed by a number indicates the packaging format and reel size. Both T1 and T5 refer to Tape & Reel packaging. The specific reel configuration may differ, but electrical and mechanical specifications are identical. Consult with the supplier for specific reel specifications if required for automated assembly equipment.

Q: Is the RG2012P-5360-W-T1 still available for purchase?

A: The RG2012P-5360-W-T1 is listed as obsolete. However, 743 units are currently in stock. For long-term production requirements, transition to an active substitute part is recommended. RG2012P-5360-W-T5 is the direct equivalent in active production status.

Q: Which substitute part should I select for a new design?

A: For new designs, select from active product status parts. RG2012P-5360-W-T5 is the direct equivalent. For applications requiring improved thermal stability, RG2012V-5360-W-T1 or RG2012V-5360-W-T5 are recommended. For precision applications, RG2012V-5360-P-T1 offers the tightest tolerance. All are Susumu products with anti-sulfur coating and full AEC-Q200 qualification.