RG2012P-5360-B-T1 Equivalent & Substitute Parts

Part Overview

The RG2012P-5360-B-T1 is a 536 Ohms ±0.1% 0.125W (1/8W) chip resistor in 0805 (2012 Metric) package format manufactured by Susumu. This thin film resistor features anti-sulfur coating and automotive AEC-Q200 qualification, designed for high-reliability applications requiring precision resistance values across extended temperature ranges from -55°C to 155°C.

The RG2012P-5360-B-T1 is classified as obsolete. Equivalent and substitute parts are available from Susumu's active product lines and alternative manufacturers, offering improved specifications or enhanced availability while maintaining core electrical and mechanical compatibility.

Key Parameters

Parameter	Value
Resistance	536 Ohms
Tolerance	±0.1%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thin Film
Operating Temperature Range	-55°C ~ 155°C
Temperature Coefficient	±25ppm/°C
Features	Anti-Sulfur, Automotive AEC-Q200
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the RG2012P-5360-B-T1 is determined by the following critical parameters:

Mandatory Compatibility Parameters:

Resistance value: 536 Ohms (exact match required)
Package / Case: 0805 (2012 Metric) (exact match required)
Power rating: 0.125W minimum (equal or higher acceptable)
Operating temperature range: -55°C ~ 155°C minimum (equal or wider acceptable)
Composition: Thin Film

Flexible Parameters (Upgradeable):

Tolerance: ±0.1% or tighter (±0.05%, ±0.02% acceptable as upgrades)
Temperature coefficient: ±25ppm/°C or lower (±10ppm/°C, ±5ppm/°C acceptable as upgrades)
Packaging format: Bulk or Tape & Reel (TR) interchangeable for component selection
Product status: Active preferred over obsolete

Compliance Parameters:

AEC-Q200 automotive qualification maintained across all primary substitutes
RoHS3 compliance maintained
MSL 1 rating maintained

Substitute parts are grouped into two categories: direct equivalents (matching all electrical specifications) and upgrades (offering improved tolerance or temperature coefficient performance while maintaining or exceeding baseline specifications).

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Temp Coeff (ppm/°C)	Operating Temp (°C)	Package	AEC-Q200	Product Status
RG2012P-5360-B-T1	Susumu	536 Ω	±0.1%	0.125	±25	-55 ~ 155	0805	Yes	Obsolete
RG2012P-5360-B-T5	Susumu	536 Ω	±0.1%	0.125	±25	-55 ~ 155	0805	Yes	Active
RG2012N-5360-B-T5	Susumu	536 Ω	±0.1%	0.125	±10	-55 ~ 155	0805	Yes	Active
RG2012N-5360-W-T1	Susumu	536 Ω	±0.05%	0.125	±10	-55 ~ 155	0805	Yes	Active
RG2012P-5360-W-T5	Susumu	536 Ω	±0.05%	0.125	±25	-55 ~ 155	0805	Yes	Active
RG2012V-5360-B-T5	Susumu	536 Ω	±0.1%	0.125	±5	-55 ~ 155	0805	Yes	Active
RG2012V-5360-P-T1	Susumu	536 Ω	±0.02%	0.125	±5	-55 ~ 155	0805	Yes	Active
RG2012V-5360-W-T1	Susumu	536 Ω	±0.05%	0.125	±5	-55 ~ 155	0805	Yes	Active
RG2012V-5360-W-T5	Susumu	536 Ω	±0.05%	0.125	±5	-55 ~ 155	0805	Yes	Active
9-2176091-2	TE Connectivity	536 Ω	±0.1%	0.25	±25	-55 ~ 155	0805	No	Active
ERA-6AEB5360V	Panasonic	536 Ω	±0.1%	0.125	±25	-55 ~ 155	0805	Yes	Active

Engineering Selection Recommendations

Direct Equivalent (Same Specifications, Active Status):

RG2012P-5360-B-T5 is the direct equivalent to RG2012P-5360-B-T1. Both parts share identical electrical specifications (536 Ohms ±0.1%, 0.125W, ±25ppm/°C) and maintain AEC-Q200 automotive qualification and ROHS3 compliance. The primary difference is product status: RG2012P-5360-B-T5 is active with higher inventory availability (862 Pcs), whereas the original part is obsolete. This substitution requires no design changes.

Susumu RG Series Upgrades (Enhanced Performance):

The Susumu RG2012N and RG2012V series parts offer improved specifications while maintaining full compatibility:

RG2012N-5360-B-T5: Reduces temperature coefficient from ±25ppm/°C to ±10ppm/°C while maintaining ±0.1% tolerance
RG2012V-5360-B-T5: Further reduces temperature coefficient to ±5ppm/°C with ±0.1% tolerance
RG2012V-5360-P-T1: Provides tightest tolerance at ±0.02% with ±5ppm/°C temperature coefficient
RG2012V-5360-W-T1 and RG2012V-5360-W-T5: Offer ±0.05% tolerance with ±5ppm/°C temperature coefficient

All Susumu upgrades maintain AEC-Q200 qualification, ROHS3 compliance, and 0805 package format. These parts are suitable for applications requiring enhanced precision or improved thermal stability.

Alternative Manufacturer Options:

ERA-6AEB5360V (Panasonic) provides an exact electrical match to the original part (536 Ohms ±0.1%, 0.125W, ±25ppm/°C) with AEC-Q200 qualification and ROHS3 compliance. This part offers significantly higher inventory (8230 Pcs) and active product status. Height specification differs slightly (0.024" vs. 0.020" maximum seated height), which is acceptable for standard PCB assembly applications.

9-2176091-2 (TE Connectivity) is a direct substitute with identical tolerance and temperature coefficient specifications but features doubled power rating (0.25W vs. 0.125W). This part does not carry AEC-Q200 qualification and is RoHS non-compliant, limiting its use to non-automotive applications. Height specification is 0.026" maximum seated.

Selection Criteria:

For automotive and high-reliability applications requiring AEC-Q200 compliance: Select RG2012P-5360-B-T5, Susumu RG2012N/RG2012V series, or ERA-6AEB5360V.

For applications requiring enhanced precision: Select RG2012V-5360-P-T1 (±0.02% tolerance) or RG2012V-5360-W series (±0.05% tolerance).

For applications requiring improved thermal stability: Select RG2012V-5360 series (±5ppm/°C) or RG2012N-5360 series (±10ppm/°C).

For non-automotive applications with higher power dissipation tolerance: 9-2176091-2 is acceptable if AEC-Q200 and RoHS compliance are not required.

Frequently Asked Questions (FAQ)

Q: Can RG2012P-5360-B-T5 be used as a direct replacement for RG2012P-5360-B-T1?

A: Yes. RG2012P-5360-B-T5 is a direct equivalent with identical electrical specifications (536 Ohms ±0.1%, 0.125W, ±25ppm/°C), package format (0805), and automotive qualifications (AEC-Q200, ROHS3). The only difference is product status: RG2012P-5360-B-T5 is active with improved availability.

Q: What is the difference between Susumu RG2012P, RG2012N, and RG2012V series?

A: These series differ in temperature coefficient performance. RG2012P series has ±25ppm/°C, RG2012N series has ±10ppm/°C, and RG2012V series has ±5ppm/°C. All maintain the same 536 Ohms resistance value, 0.125W power rating, and 0805 package format. The RG2012V series provides the most stable performance across temperature variations.

Q: Can I use RG2012V-5360-P-T1 (±0.02% tolerance) instead of RG2012P-5360-B-T1 (±0.1% tolerance)?

A: Yes. RG2012V-5360-P-T1 is an upgrade with tighter tolerance (±0.02% vs. ±0.1%) and lower temperature coefficient (±5ppm/°C vs. ±25ppm/°C). It maintains the same 536 Ohms resistance, 0.125W power rating, 0805 package, and AEC-Q200 qualification. This substitution improves circuit precision without requiring design modifications.

Q: What is the difference between Tape & Reel (TR) and bulk packaging?

A: Tape & Reel packaging is used for automated assembly processes, while bulk packaging is used for manual assembly or smaller production runs. Both formats contain identical components. The original RG2012P-5360-B-T1 was supplied in bulk; equivalent parts are available in Tape & Reel format for high-volume manufacturing.

Q: Is ERA-6AEB5360V (Panasonic) compatible with RG2012P-5360-B-T1?

A: Yes. ERA-6AEB5360V is electrically and mechanically compatible with identical specifications (536 Ohms ±0.1%, 0.125W, ±25ppm/°C, 0805 package). Both parts carry AEC-Q200 qualification and ROHS3 compliance. The seated height differs slightly (0.024" vs. 0.020" maximum), which is acceptable for standard PCB assembly. ERA-6AEB5360V offers significantly higher inventory availability.

Q: Can I use 9-2176091-2 (TE Connectivity) as a substitute?

A: 9-2176091-2 is electrically compatible (536 Ohms ±0.1%, ±25ppm/°C) but has doubled power rating (0.25W vs. 0.125W). This part does not carry AEC-Q200 qualification and is RoHS non-compliant. Use only in non-automotive applications where automotive qualification is not required.

Q: Which substitute part offers the best temperature stability?

A: RG2012V-5360-P-T1 offers the best temperature stability with ±5ppm/°C temperature coefficient and ±0.02% tolerance. RG2012V-5360-W series parts also provide ±5ppm/°C with ±0.05% tolerance. Both are suitable for precision applications requiring minimal resistance drift across the -55°C to 155°C operating range.

Q: Are all substitute parts RoHS3 compliant?

A: All Susumu RG series substitutes and Panasonic ERA-6AEB5360V are ROHS3 compliant. TE Connectivity 9-2176091-2 is RoHS non-compliant. Verify RoHS compliance requirements for your application before selection.

Q: Do all substitute parts maintain AEC-Q200 automotive qualification?

A: All Susumu RG series parts and Panasonic ERA-6AEB5360V maintain AEC-Q200 qualification. TE Connectivity 9-2176091-2 does not carry AEC-Q200 qualification. For automotive applications, select from Susumu or Panasonic options.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message