RG2012P-4753-D-T5 Equivalent & Substitute Parts

Part Overview

The RG2012P-4753-D-T5 is a 475 kOhms ±0.5% thin film chip resistor manufactured by Susumu in 0805 (2012 Metric) package format. This surface-mount device is rated for 0.125W (1/8W) power dissipation and is qualified to AEC-Q200 automotive standards with anti-sulfur coating. The component is active in production status with RoHS3 compliance and unlimited moisture sensitivity level (MSL 1).

Equivalent and substitute parts are identified to address supply chain requirements, design optimization needs, or performance specification upgrades while maintaining functional compatibility within the 0805 package footprint and 475 kOhms resistance value.

Substiute Parts

RG2012P-4753-D-T5

SusumuIn Stock: 1080RG2012P-4753-D-T5 Datasheet

Current PartRFQ

5-2176094-8

TE Connectivity Passive ProductIn Stock: 14715-2176094-8 Datasheet

DirectRFQ

ERA-6AED4753V

Panasonic Electronic ComponentsIn Stock: 14374ERA-6AED4753V Datasheet

DirectRFQ

ERA-6AEB4753V

Panasonic Electronic ComponentsIn Stock: 2667ERA-6AEB4753V Datasheet

UpgradeRFQ

RT0805BRD07475KL

YAGEOIn Stock: 5363RT0805BRD07475KL Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution logic for the RG2012P-4753-D-T5 is based on the following criteria:

Direct Equivalents maintain all critical parameters: 475 kOhms resistance, ±0.5% tolerance, 0.125W power rating, 0805 package, thin film composition, ±25ppm/°C temperature coefficient, -55°C to 155°C operating range, RoHS3 compliance, and MSL 1 rating.

Tolerance Upgrades provide superior accuracy with ±0.1% tolerance while maintaining all other critical specifications including 475 kOhms resistance, 0.125W power rating, 0805 package, thin film composition, and full environmental/compliance ratings.

Power Rating Upgrades increase thermal capability to 0.25W (1/4W) while maintaining 475 kOhms resistance, ±0.1% tolerance, 0805 package, and all compliance requirements.

All substitute parts are packaged in Tape & Reel (TR) format, maintain RoHS3 compliance, and operate within the -55°C to 155°C temperature range. All parts are active in production status.

Parameter Comparison

Engineering Selection Recommendations

Direct Equivalent Selection

ERA-6AED4753V (Panasonic) is the direct functional equivalent to RG2012P-4753-D-T5. Both components share identical electrical specifications: 475 kOhms ±0.5% tolerance, 0.125W power rating, ±25ppm/°C temperature coefficient, and -55°C to 155°C operating range. Both are AEC-Q200 qualified, RoHS3 compliant, and MSL 1 rated. The ERA-6AED4753V provides equivalent performance with higher inventory availability (14,297 units in stock versus 999 units for the main part).

Tolerance Upgrade Selection

ERA-6AEB4753V (Panasonic) and RT0805BRD07475KL (YAGEO) provide ±0.1% tolerance upgrade while maintaining 0.125W power rating and all environmental specifications. ERA-6AEB4753V includes AEC-Q200 qualification matching the original part's automotive rating. RT0805BRD07475KL does not carry AEC-Q200 qualification. Selection between these two depends on automotive qualification requirements.

Power Rating Upgrade Selection

5-2176094-8 (TE Connectivity) increases power dissipation capability to 0.25W while providing ±0.1% tolerance improvement. This part does not carry AEC-Q200 qualification. Physical height increases to 0.65mm maximum (compared to 0.50mm for the main part), requiring verification of PCB clearance constraints.

Compliance Verification

All substitute parts maintain RoHS3 compliance and MSL 1 rating. REACH status varies: ERA-6AED4753V and ERA-6AEB4753V are REACH Unaffected; 5-2176094-8 shows Vendor Undefined status; RT0805BRD07475KL is REACH Unaffected.

Frequently Asked Questions (FAQ)

Q: Can ERA-6AED4753V replace RG2012P-4753-D-T5 in automotive applications?

A: Yes. Both components are AEC-Q200 qualified with identical electrical specifications (475 kOhms ±0.5%, 0.125W, ±25ppm/°C, -55°C to 155°C). Physical dimensions are compatible within 0805 package constraints.

Q: What is the difference between ERA-6AEB4753V and ERA-6AED4753V?

A: ERA-6AEB4753V provides ±0.1% tolerance versus ±0.5% tolerance in ERA-6AED4753V. Both maintain identical power rating (0.125W), AEC-Q200 qualification, and all environmental specifications. Selection depends on circuit accuracy requirements.

Q: Can 5-2176094-8 be used as a direct replacement?

A: 5-2176094-8 is functionally compatible for resistance value and tolerance but differs in power rating (0.25W versus 0.125W) and lacks AEC-Q200 qualification. Physical height increases to 0.65mm. Use only when higher power dissipation is required and automotive qualification is not mandated.

Q: Does RT0805BRD07475KL meet automotive standards?

A: RT0805BRD07475KL is not AEC-Q200 qualified. It provides ±0.1% tolerance and 0.125W power rating in 0805 package with RoHS3 compliance. Use only in non-automotive applications or where automotive qualification is not required.

Q: Are all substitute parts available in Tape & Reel packaging?

A: Yes. All listed substitute parts are supplied in Tape & Reel (TR) packaging format compatible with automated assembly processes.

Q: What is the impact of height differences on PCB design?

A: RG2012P-4753-D-T5 maximum height is 0.50mm. ERA-6AED4753V and ERA-6AEB4753V are 0.60mm. 5-2176094-8 is 0.65mm. Verify PCB clearance and solder reflow profile compatibility when substituting parts with increased height.

Q: Are all parts RoHS3 compliant?

A: Yes. All listed parts maintain RoHS3 compliance. REACH status varies by manufacturer; verify specific REACH requirements for your application.