RG2012P-363-W-T5 Equivalent & Substitute Parts

Part Overview

The RG2012P-363-W-T5 is a 36 kOhms ±0.05% thin film chip resistor manufactured by Susumu in 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation and features anti-sulfur coating with automotive AEC-Q200 qualification. The part is active in production status with 948 units currently in stock. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity for applications requiring this specific resistance value and tolerance specification.

Substiute Parts

RG2012P-363-W-T5

SusumuIn Stock: 995RG2012P-363-W-T5 Datasheet

Current PartRFQ

ERA-6ARW363V

Panasonic Electronic ComponentsIn Stock: 2166ERA-6ARW363V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RG2012P-363-W-T5 is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 36 kOhms
• Tolerance: ±0.05%
• Power rating: 0.125W (1/8W)
• Package format: 0805 (2012 Metric)
• Composition: Thin Film
• Operating temperature range: -55°C ~ 155°C
• Automotive qualification: AEC-Q200
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity level: 1 (Unlimited)

The ERA-6ARW363V manufactured by Panasonic Electronic Components meets all mandatory matching parameters and qualifies as a direct substitute. Both parts share identical electrical specifications, package dimensions, and compliance certifications. Differences in temperature coefficient (±25ppm/°C for RG2012P-363-W-T5 versus ±10ppm/°C for ERA-6ARW363V) and maximum seated height (0.020" versus 0.024") do not preclude substitution within standard PCB assembly tolerances and thermal operating conditions.

Parameter Comparison

Engineering Selection Recommendations

Both the RG2012P-363-W-T5 and ERA-6ARW363V are active production components with full AEC-Q200 automotive qualification and ROHS3 compliance. Selection between these parts is based on availability and supply chain requirements rather than electrical performance differences.

The ERA-6ARW363V offers superior temperature coefficient stability (±10ppm/°C versus ±25ppm/°C), which provides enhanced precision in applications with stringent thermal drift specifications. The RG2012P-363-W-T5 includes anti-sulfur coating, which provides additional environmental protection in corrosive atmospheres.

Both components are suitable for direct substitution in automotive and industrial applications requiring 36 kOhms ±0.05% thin film resistors in 0805 package format. PCB layout and assembly processes require no modification when switching between these parts.

Frequently Asked Questions (FAQ)

Q: Can ERA-6ARW363V replace RG2012P-363-W-T5 in existing designs?

A: Yes. Both parts share identical resistance, tolerance, power rating, package format, and operating temperature range. The ERA-6ARW363V is a direct substitute with no design modifications required.

Q: What is the difference in temperature coefficient between these parts?

A: The RG2012P-363-W-T5 has a temperature coefficient of ±25ppm/°C, while the ERA-6ARW363V has ±10ppm/°C. The ERA-6ARW363V exhibits lower thermal drift, which is beneficial in precision analog circuits operating across wide temperature ranges.

Q: Are both parts qualified for automotive applications?

A: Yes. Both the RG2012P-363-W-T5 and ERA-6ARW363V carry AEC-Q200 automotive qualification and are suitable for automotive-grade applications.

Q: What is the difference in maximum seated height?

A: The RG2012P-363-W-T5 has a maximum seated height of 0.020" (0.50mm), while the ERA-6ARW363V is 0.024" (0.60mm). This 0.004" difference is within standard PCB assembly tolerances and does not affect component placement or functionality.

Q: Are both parts RoHS compliant?

A: Yes. Both the RG2012P-363-W-T5 and ERA-6ARW363V are ROHS3 compliant and meet environmental regulatory requirements.

Q: What is the moisture sensitivity level for these parts?

A: Both parts have Moisture Sensitivity Level 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.

Q: Can these parts be used interchangeably in production?

A: Yes. Both parts are pin-compatible, package-compatible, and electrically equivalent for the specified 36 kOhms ±0.05% application. No PCB redesign or assembly process changes are required.