RG2012P-362-B-T5 Equivalent & Substitute Parts

Part Overview

The RG2012P-362-B-T5 is a 3.6 kOhms ±0.1% thin film chip resistor manufactured by Susumu in 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation and is qualified to AEC-Q200 automotive standards with anti-sulfur coating. The part is active in production with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Equivalent and substitute parts are identified to support component availability, supply chain continuity, and design flexibility while maintaining electrical and mechanical compatibility.

Substiute Parts

RG2012P-362-B-T5

SusumuIn Stock: 5912RG2012P-362-B-T5 Datasheet

Current PartRFQ

ERA-6AEB362V

Panasonic Electronic ComponentsIn Stock: 13504ERA-6AEB362V Datasheet

DirectRFQ

RT0805BRD073K6L

YAGEOIn Stock: 6517RT0805BRD073K6L Datasheet

DirectRFQ

TNPW08053K60BEEA

Vishay DaleIn Stock: 11179TNPW08053K60BEEA Datasheet

DirectRFQ

ERA-6APB362V

Panasonic Electronic ComponentsIn Stock: 5812ERA-6APB362V Datasheet

UpgradeRFQ

ERA-6ARB362V

Panasonic Electronic ComponentsIn Stock: 5636ERA-6ARB362V Datasheet

UpgradeRFQ

ERA-6ARW362V

Panasonic Electronic ComponentsIn Stock: 22866ERA-6ARW362V Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RG2012P-362-B-T5 is determined by strict equivalence across the following critical parameters:

Primary Substitution Criteria:

• Resistance value: 3.6 kOhms (exact match required)
• Tolerance: ±0.1% or tighter (±0.05% acceptable as upgrade)
• Package: 0805 (2012 Metric) form factor
• Power rating: 0.125W minimum (higher ratings acceptable)
• Composition: Thin film technology
• Temperature coefficient: ±25ppm/°C or better
• Operating temperature range: -55°C to 155°C minimum
• Automotive qualification: AEC-Q200 required for direct substitution
• RoHS compliance: ROHS3 Compliant

Substitution Categories:

Direct Equivalents maintain all electrical and mechanical specifications identical to the main part. These parts are interchangeable without design modification.

Upgrade Substitutes offer improved performance characteristics (tighter tolerance, lower temperature coefficient) while maintaining full backward compatibility. These parts exceed the original specification and are suitable for applications requiring enhanced precision.

Compatible Alternatives meet all critical electrical parameters and package requirements but may differ in secondary characteristics such as packaging format (Tape & Reel versus Cut Tape) or extended operating temperature range. These parts are functionally equivalent for the specified application.

Parameter Comparison

Engineering Selection Recommendations

Direct Equivalent Substitution:

ERA-6AEB362V (Panasonic) is a direct functional equivalent to RG2012P-362-B-T5. Both parts share identical electrical specifications (3.6 kΩ, ±0.1%, 0.125W), temperature coefficient (±25ppm/°C), and AEC-Q200 automotive qualification. The maximum seated height differs by 0.10mm (0.60mm versus 0.50mm), which is within standard PCB assembly tolerances for 0805 components. This part is suitable for direct replacement in existing designs.

Upgrade Substitution with Enhanced Performance:

ERA-6ARB362V (Panasonic) provides improved temperature stability with ±10ppm/°C coefficient compared to the original ±25ppm/°C specification, while maintaining all other electrical parameters and AEC-Q200 compliance. This upgrade is appropriate for applications requiring enhanced precision over extended temperature ranges.

ERA-6ARW362V (Panasonic) offers the highest precision with ±0.05% tolerance and ±10ppm/°C temperature coefficient. This part is suitable for precision measurement circuits and applications where tighter component tolerances directly improve system performance.

Compatible Alternative with Extended Temperature Range:

TNPW08053K60BEEA (Vishay Dale) maintains electrical equivalence (3.6 kΩ, ±0.1%, ±25ppm/°C) and AEC-Q200 qualification with enhanced power rating (0.26W versus 0.125W) and extended operating temperature range (-55°C to 175°C). This part is suitable for applications requiring higher thermal margin or operation at elevated temperatures. Packaging format differs (Cut Tape & Digi-Reel versus Tape & Reel), requiring verification of assembly equipment compatibility.

Non-Recommended Substitution:

RT0805BRD073K6L (YAGEO) meets electrical specifications but lacks AEC-Q200 automotive qualification. This part is not suitable for applications requiring automotive-grade components or AEC-Q200 compliance.

Frequently Asked Questions (FAQ)

Q: Can ERA-6AEB362V be used as a direct replacement for RG2012P-362-B-T5?

A: Yes. Both parts are electrically and mechanically equivalent with identical resistance (3.6 kΩ), tolerance (±0.1%), power rating (0.125W), temperature coefficient (±25ppm/°C), and AEC-Q200 qualification. The 0.10mm difference in maximum seated height (0.60mm versus 0.50mm) is within standard PCB assembly tolerances for 0805 components and does not affect functionality.

Q: What is the difference between the upgrade parts (ERA-6ARB362V and ERA-6ARW362V) and the original RG2012P-362-B-T5?

A: ERA-6ARB362V improves temperature stability from ±25ppm/°C to ±10ppm/°C while maintaining ±0.1% tolerance. ERA-6ARW362V further improves tolerance to ±0.05% and maintains ±10ppm/°C temperature coefficient. Both upgrades are fully backward compatible and suitable for applications requiring enhanced precision. All other electrical and mechanical parameters remain equivalent.

Q: Is TNPW08053K60BEEA suitable for the same applications as RG2012P-362-B-T5?

A: TNPW08053K60BEEA is electrically equivalent with identical resistance, tolerance, and temperature coefficient. It offers higher power rating (0.26W versus 0.125W) and extended operating temperature range (-55°C to 175°C). However, packaging differs (Cut Tape & Digi-Reel versus Tape & Reel), requiring verification of assembly equipment compatibility. AEC-Q200 qualification is maintained.

Q: Why is RT0805BRD073K6L not recommended as a substitute?

A: RT0805BRD073K6L lacks AEC-Q200 automotive qualification. Applications requiring automotive-grade components or AEC-Q200 compliance must use qualified alternatives such as ERA-6AEB362V, ERA-6ARB362V, ERA-6ARW362V, or TNPW08053K60BEEA.

Q: What packaging formats are available for these substitute parts?

A: RG2012P-362-B-T5, ERA-6AEB362V, ERA-6ARB362V, and ERA-6ARW362V are supplied in Tape & Reel (TR) format. TNPW08053K60BEEA is supplied in Cut Tape (CT) & Digi-Reel format. Verify assembly equipment compatibility with the selected packaging format before procurement.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts (ERA-6AEB362V, RT0805BRD073K6L, TNPW08053K60BEEA, ERA-6APB362V, ERA-6ARB362V, and ERA-6ARW362V) are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating, matching the original RG2012P-362-B-T5 specification.

Q: Can ERA-6APB362V be used interchangeably with RG2012P-362-B-T5?

A: Yes. ERA-6APB362V is electrically equivalent with identical resistance (3.6 kΩ), tolerance (±0.1%), power rating (0.125W), and AEC-Q200 qualification. Temperature coefficient is improved to ±15ppm/°C compared to the original ±25ppm/°C. This part is suitable for direct replacement with enhanced thermal stability.