RG2012P-3323-D-T5 Equivalent & Substitute Parts

Part Overview

The RG2012P-3323-D-T5 is a 332 kOhms ±0.5% thin film chip resistor manufactured by Susumu in 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation and features anti-sulfur coating with automotive AEC-Q200 qualification. The part is actively produced and available in high volume inventory. Equivalent and substitute parts are identified for applications requiring alternative sourcing, inventory management, or specific performance upgrades within compatible electrical and mechanical parameters.

Substiute Parts

RG2012P-3323-D-T5

SusumuIn Stock: 735RG2012P-3323-D-T5 Datasheet

Current PartRFQ

4-2176094-3

TE Connectivity Passive ProductIn Stock: 24754-2176094-3 Datasheet

DirectRFQ

ERA-6AEB3323V

Panasonic Electronic ComponentsIn Stock: 49755ERA-6AEB3323V Datasheet

UpgradeRFQ

RT0805BRD07332KL

YAGEOIn Stock: 5230RT0805BRD07332KL Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following criteria:

Mandatory Compatibility Parameters:

• Resistance value: 332 kOhms (exact match required)
• Package / Case: 0805 (2012 Metric) (exact match required)
• Composition: Thin Film (exact match required)
• Temperature Coefficient: ±25ppm/°C (exact match required)
• Operating Temperature Range: -55°C ~ 155°C (exact match required)
• RoHS Status: ROHS3 Compliant (exact match required)
• Moisture Sensitivity Level: 1 (Unlimited) (exact match required)

Allowable Variation Parameters:

• Tolerance: ±0.5% or tighter (±0.1% acceptable as upgrade)
• Power Rating: 0.125W or higher (0.25W acceptable as upgrade)
• Automotive Rating: AEC-Q200 optional (presence acceptable as upgrade)

All identified substitute parts meet or exceed the mandatory compatibility parameters. Tolerance and power rating variations represent performance upgrades or alternative sourcing options within the same functional category.

Parameter Comparison

Engineering Selection Recommendations

RG2012P-3323-D-T5 (Primary Part) Select this part for applications requiring the original specification with ±0.5% tolerance, anti-sulfur coating, and AEC-Q200 automotive qualification. This part maintains the lowest seated height at 0.020" (0.50mm), suitable for space-constrained PCB layouts.

ERA-6AEB3323V (Panasonic) - Upgrade Option This part provides improved tolerance performance at ±0.1% while maintaining identical power rating (0.125W), operating temperature range, and AEC-Q200 automotive qualification. Seated height increases to 0.024" (0.60mm). Select this part for applications requiring tighter tolerance specifications without power rating upgrades. REACH status is unaffected.

RT0805BRD07332KL (YAGEO) - Upgrade Option This part provides improved tolerance performance at ±0.1% while maintaining identical power rating (0.125W) and operating temperature range. Seated height is 0.024" (0.60mm). This part does not carry AEC-Q200 automotive qualification. Select this part for non-automotive applications requiring tighter tolerance specifications. REACH status is unaffected.

4-2176094-3 (TE Connectivity) - Power Upgrade Option This part provides both improved tolerance at ±0.1% and increased power rating at 0.25W (1/4W). Seated height increases to 0.026" (0.65mm). This part does not carry AEC-Q200 automotive qualification. Select this part for applications requiring higher power dissipation capability or thermal margin. REACH status is vendor undefined.

Frequently Asked Questions (FAQ)

Q: Can ERA-6AEB3323V be used as a direct replacement for RG2012P-3323-D-T5?

A: Yes. Both parts share identical resistance (332 kOhms), package (0805), power rating (0.125W), operating temperature range (-55°C ~ 155°C), and AEC-Q200 automotive qualification. The ERA-6AEB3323V provides tighter tolerance (±0.1% vs ±0.5%). Seated height increases from 0.020" to 0.024", which may require PCB layout verification for space-constrained applications.

Q: What is the difference between the ±0.5% and ±0.1% tolerance options?

A: Tolerance specifies the maximum allowable deviation from the nominal 332 kOhms resistance value. ±0.5% allows deviation up to ±1.66 kOhms, while ±0.1% limits deviation to ±0.332 kOhms. Applications requiring precise resistance values benefit from ±0.1% tolerance parts.

Q: Is the 4-2176094-3 suitable for automotive applications?

A: The 4-2176094-3 does not carry AEC-Q200 automotive qualification. For automotive applications, select RG2012P-3323-D-T5 or ERA-6AEB3323V, both of which are AEC-Q200 qualified.

Q: Why does the 4-2176094-3 have a higher power rating (0.25W vs 0.125W)?

A: The 4-2176094-3 is rated for 0.25W (1/4W) power dissipation compared to 0.125W (1/8W) for the other parts. This provides greater thermal margin and allows operation at higher power levels. The increased power rating does not affect electrical compatibility in circuits designed for 0.125W operation.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All identified substitute parts are ROHS3 compliant, matching the compliance status of the RG2012P-3323-D-T5.

Q: What is the significance of Moisture Sensitivity Level 1?

A: Moisture Sensitivity Level 1 (Unlimited) indicates the component has no moisture sensitivity restrictions. These parts can be stored and handled without special moisture control measures, simplifying inventory management and logistics.

Q: Can RT0805BRD07332KL be used in place of RG2012P-3323-D-T5 in automotive circuits?

A: The RT0805BRD07332KL does not carry AEC-Q200 automotive qualification. For automotive applications, use RG2012P-3323-D-T5 or ERA-6AEB3323V instead.

Q: How do seated height differences affect PCB design?

A: Seated height varies from 0.020" (RG2012P-3323-D-T5) to 0.026" (4-2176094-3). In applications with tight vertical clearance constraints, verify that substitute parts with greater seated height do not interfere with overlying components or enclosure geometry.