RG2012P-274-B-T1 Equivalent & Substitute Parts

Part Overview

The RG2012P-274-B-T1 is a 270 kOhms ±0.1% thin film chip resistor in 0805 (2012 Metric) package rated for 0.125W (1/8W) power dissipation. This component is designed for automotive applications and meets AEC-Q200 qualification standards with anti-sulfur coating. The part is currently obsolete, necessitating identification of active equivalent and substitute components that maintain electrical and mechanical compatibility for ongoing production and repair applications.

Substiute Parts

RG2012P-274-B-T1

SusumuIn Stock: 779RG2012P-274-B-T1 Datasheet

Current PartRFQ

RG2012P-274-B-T5

SusumuIn Stock: 6189RG2012P-274-B-T5 Datasheet

DirectRFQ

RG2012N-274-B-T5

SusumuIn Stock: 967RG2012N-274-B-T5 Datasheet

UpgradeRFQ

RG2012N-274-W-T5

SusumuIn Stock: 818RG2012N-274-W-T5 Datasheet

UpgradeRFQ

RG2012P-274-W-T5

SusumuIn Stock: 1032RG2012P-274-W-T5 Datasheet

UpgradeRFQ

ERA-6AEB274V

Panasonic Electronic ComponentsIn Stock: 24399ERA-6AEB274V Datasheet

DirectRFQ

RT0805BRD07270KL

YAGEOIn Stock: 10277RT0805BRD07270KL Datasheet

DirectRFQ

TNPW0805270KBEEA

Vishay DaleIn Stock: 6091TNPW0805270KBEEA Datasheet

DirectRFQ

TNPW0805270KBEEN

Vishay DaleIn Stock: 1063TNPW0805270KBEEN Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RG2012P-274-B-T1 is determined by the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 270 kOhms
• Package / Case: 0805 (2012 Metric)
• Composition: Thin Film
• Tolerance: ±0.1% (minimum requirement)
• Power Rating: 0.125W minimum
• Automotive Rating: AEC-Q200
• RoHS Compliance: ROHS3 Compliant

Allowable Variations:

• Temperature Coefficient: ±25ppm/°C or better (lower values represent improved stability)
• Operating Temperature Range: -55°C ~ 155°C minimum; extended ranges are acceptable
• Packaging Format: Different packaging formats (Tape & Reel vs. Cut Tape) are interchangeable for component selection
• Manufacturer: Different manufacturers with equivalent specifications are acceptable

Substitute parts are grouped into two categories: direct equivalents (matching all electrical specifications) and upgrades (enhanced specifications such as improved tolerance or temperature coefficient).

Parameter Comparison

Engineering Selection Recommendations

Direct Equivalents (Identical Electrical Specifications):

RG2012P-274-B-T5 (Susumu) is the direct successor to the obsolete RG2012P-274-B-T1, maintaining identical electrical and mechanical specifications while offering active product status. This part is the primary replacement for direct substitution.

ERA-6AEB274V (Panasonic Electronic Components) provides equivalent electrical performance with active status and AEC-Q200 certification. This part is suitable for applications requiring cross-manufacturer qualification.

RT0805BRD07270KL (YAGEO) matches all electrical specifications and maintains active status. Note that this part does not carry explicit AEC-Q200 certification in the provided data, which may be a consideration for automotive-critical applications.

Upgraded Specifications (Enhanced Performance):

RG2012N-274-B-T5 (Susumu) offers improved temperature coefficient (±10ppm/°C versus ±25ppm/°C) while maintaining all other specifications. This upgrade provides enhanced stability across the operating temperature range.

RG2012N-274-W-T5 (Susumu) combines improved temperature coefficient (±10ppm/°C) with tighter tolerance (±0.05% versus ±0.1%), representing the highest precision option within the Susumu RG series.

RG2012P-274-W-T5 (Susumu) provides tighter tolerance (±0.05%) while maintaining the standard temperature coefficient (±25ppm/°C).

TNPW0805270KBEEA and TNPW0805270KBEEN (Vishay Dale) offer higher power rating (0.26W versus 0.125W) and extended operating temperature range (-55°C ~ 175°C versus -55°C ~ 155°C). These parts are suitable for applications requiring additional thermal margin or higher power dissipation capability.

Selection Criteria:

For direct replacement in existing designs, select RG2012P-274-B-T5 or ERA-6AEB274V. For applications requiring improved temperature stability, select RG2012N-274-B-T5 or RG2012N-274-W-T5. For applications requiring higher power dissipation or extended temperature range, select TNPW0805270KBEEA or TNPW0805270KBEEN. All recommended parts maintain ROHS3 compliance and MSL 1 rating.

Frequently Asked Questions (FAQ)

Q: Can RG2012P-274-B-T5 be used as a direct replacement for RG2012P-274-B-T1?

A: Yes. RG2012P-274-B-T5 is the active equivalent of the obsolete RG2012P-274-B-T1, with identical electrical specifications (270 kOhms ±0.1%, 0.125W, ±25ppm/°C) and mechanical package (0805). The primary difference is product status and packaging format availability.

Q: What is the difference between RG2012P and RG2012N series resistors?

A: The RG2012N series offers improved temperature coefficient (±10ppm/°C) compared to the RG2012P series (±25ppm/°C). Both series maintain identical resistance, tolerance, power rating, and package specifications. Selection depends on application requirements for temperature stability.

Q: Are the Susumu RG2012 parts interchangeable with Panasonic ERA-6AEB274V?

A: Yes, for applications where electrical specifications are the primary requirement. Both parts share identical resistance (270 kOhms), tolerance (±0.1%), power rating (0.125W), temperature coefficient (±25ppm/°C), and package (0805). Both carry AEC-Q200 certification. Physical dimensions vary slightly (height: 0.50mm versus 0.60mm), which is within standard PCB assembly tolerances.

Q: Can TNPW0805270KBEEA be used in place of RG2012P-274-B-T1?

A: Yes, with the following considerations: TNPW0805270KBEEA provides higher power rating (0.26W versus 0.125W) and extended operating temperature range (-55°C ~ 175°C versus -55°C ~ 155°C). All other electrical specifications match. The higher power rating and extended temperature range represent performance enhancements suitable for thermally demanding applications.

Q: Does RT0805BRD07270KL meet automotive qualification requirements?

A: RT0805BRD07270KL matches all electrical specifications of the RG2012P-274-B-T1 and maintains active product status. However, the provided data does not explicitly list AEC-Q200 certification for this part. Verification of automotive qualification status with the manufacturer or distributor is necessary for applications requiring explicit AEC-Q200 compliance.

Q: What is the significance of the packaging format difference (Tape & Reel versus Cut Tape)?

A: Packaging format affects supply and handling but does not impact electrical or mechanical performance. Tape & Reel (TR) packaging is standard for high-volume automated assembly. Cut Tape (CT) packaging is suitable for lower-volume or manual assembly operations. Component selection can proceed based on packaging availability and assembly process requirements.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All parts listed in this reference maintain ROHS3 compliance and MSL 1 (Unlimited) moisture sensitivity rating, ensuring compatibility with modern manufacturing and environmental standards.

Q: What tolerance options are available for 270 kOhm 0805 thin film resistors?

A: The available tolerance options are ±0.1% (standard) and ±0.05% (enhanced). The ±0.05% tolerance is available in RG2012N-274-W-T5 and RG2012P-274-W-T5. Selection depends on circuit accuracy requirements.