RG2012P-2740-B-T5 Equivalent & Substitute Parts

Part Overview

The RG2012P-2740-B-T5 is a 274 Ohms ±0.1% thin film chip resistor manufactured by Susumu in 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation and features automotive AEC-Q200 qualification with anti-sulfur coating. The part is actively produced and available in Tape & Reel packaging. Equivalent and substitute parts are identified for applications requiring alternative sourcing, inventory management, or specific manufacturer preferences while maintaining electrical and mechanical compatibility.

Substiute Parts

RG2012P-2740-B-T5

SusumuIn Stock: 1133RG2012P-2740-B-T5 Datasheet

Current PartRFQ

6-2176091-5

TE Connectivity Passive ProductIn Stock: 36046-2176091-5 Datasheet

DirectRFQ

ERA-6AEB2740V

Panasonic Electronic ComponentsIn Stock: 34045ERA-6AEB2740V Datasheet

DirectRFQ

RT0805BRD07274RL

YAGEOIn Stock: 10177RT0805BRD07274RL Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RG2012P-2740-B-T5 is determined by the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 274 Ohms
• Tolerance: ±0.1%
• Package / Case: 0805 (2012 Metric)
• Composition: Thin Film
• Temperature Coefficient: ±25ppm/°C
• Operating Temperature Range: -55°C ~ 155°C
• Number of Terminations: 2
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Allowable Variation:

• Power Rating: Substitutes with equal or higher power rating (0.125W or greater) are acceptable
• Physical Height: Variation permitted within component mounting constraints
• Packaging Format: Both Tape & Reel and Cut Tape formats are compatible for equivalent functionality

All identified substitute parts meet or exceed the mandatory parameters and are therefore electrically and mechanically interchangeable with the main part.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed are active products with ROHS3 compliance and identical moisture sensitivity ratings. Selection among equivalent parts is based on the following factors:

ERA-6AEB2740V (Panasonic): This part provides direct electrical and mechanical equivalence to the main part with identical power rating (0.125W) and automotive AEC-Q200 qualification. The seated height of 0.024" (0.60mm) is within acceptable tolerance for standard PCB assembly processes.

RT0805BRD07274RL (YAGEO): This part matches all electrical specifications and power rating with identical seated height to the Panasonic equivalent (0.024"). Packaging is available in Cut Tape and Digi-Reel format, providing alternative supply chain options.

6-2176091-5 (TE Connectivity): This part provides electrical equivalence with an elevated power rating of 0.25W (1/4W), suitable for applications requiring higher thermal margin. The seated height of 0.026" (0.65mm) remains within acceptable PCB assembly constraints. This part does not carry automotive AEC-Q200 certification.

All parts are RoHS3 compliant and REACH unaffected, meeting regulatory requirements for industrial and commercial applications.

Frequently Asked Questions (FAQ)

Q: Can the ERA-6AEB2740V replace the RG2012P-2740-B-T5 in automotive applications?

A: Yes. Both parts carry AEC-Q200 automotive qualification, identical resistance (274 Ohms), tolerance (±0.1%), power rating (0.125W), and operating temperature range (-55°C ~ 155°C). Electrical and mechanical compatibility is confirmed.

Q: What is the difference between the TE Connectivity 6-2176091-5 and other substitutes?

A: The TE Connectivity part features a higher power rating of 0.25W (1/4W) compared to the 0.125W rating of other substitutes. This provides increased thermal capacity. However, this part does not carry AEC-Q200 automotive certification. The seated height is 0.026" (0.65mm), slightly higher than other options.

Q: Are there packaging format differences among the substitute parts?

A: Yes. The Susumu, Panasonic, and TE Connectivity parts are supplied in Tape & Reel (TR) format. The YAGEO part is available in Cut Tape (CT) and Digi-Reel format. Both formats are compatible for PCB assembly; selection depends on production equipment and inventory management requirements.

Q: Do all substitute parts meet the same tolerance specification?

A: Yes. All substitute parts maintain ±0.1% tolerance, matching the main part specification. Temperature coefficient is ±25ppm/°C across all parts.

Q: What is the maximum seated height variation among these parts?

A: The main part has a maximum seated height of 0.020" (0.50mm). Substitute parts range from 0.024" to 0.026" (0.60mm to 0.65mm). These variations are within standard PCB assembly tolerances and do not affect electrical performance or mechanical fit in standard 0805 footprints.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All listed substitute parts are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements.