RG2012P-2671-D-T5 Equivalent & Substitute Parts

Part Overview

The RG2012P-2671-D-T5 is a 2.67 kOhms ±0.5% thin film chip resistor manufactured by Susumu in 0805 (2012 Metric) package format. This surface-mount device is rated for 0.125W (1/8W) power dissipation and features anti-sulfur coating with automotive AEC-Q200 qualification. The part is active in production with 937 units currently in stock. Equivalent and substitute parts are identified when component availability is limited, supply chain disruptions occur, or design requirements necessitate alternative sourcing from qualified manufacturers.

Substiute Parts

RG2012P-2671-D-T5

SusumuIn Stock: 1017RG2012P-2671-D-T5 Datasheet

Current PartRFQ

5-2176092-4

TE Connectivity Passive ProductIn Stock: 15825-2176092-4 Datasheet

DirectRFQ

ERA-6AEB2671V

Panasonic Electronic ComponentsIn Stock: 21802ERA-6AEB2671V Datasheet

UpgradeRFQ

RT0805BRD072K67L

YAGEOIn Stock: 12464RT0805BRD072K67L Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RG2012P-2671-D-T5 is determined by the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 2.67 kOhms
• Package format: 0805 (2012 Metric)
• Composition: Thin Film
• Temperature coefficient: ±25ppm/°C
• Operating temperature range: -55°C ~ 155°C
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity level: 1 (Unlimited)

Allowable Variation Parameters:

• Tolerance: May be equal or tighter (±0.5% or better)
• Power rating: May be equal or higher (0.125W or greater)
• Automotive qualification: May be present or absent depending on application requirements

All identified substitute parts maintain identical resistance, package, composition, and environmental specifications. Variations in tolerance and power rating represent either equivalent or upgraded performance characteristics.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection (RG2012P-2671-D-T5 - Susumu): Select the original Susumu part when automotive AEC-Q200 qualification is required and anti-sulfur coating specifications are mandated by design or application standards.

Direct Equivalent (ERA-6AEB2671V - Panasonic): The Panasonic ERA-6AEB2671V provides direct substitution with improved tolerance (±0.1% versus ±0.5%) while maintaining identical power rating, package dimensions, and automotive AEC-Q200 qualification. This part is suitable for applications requiring enhanced precision and automotive compliance.

Upgraded Equivalent (RT0805BRD072K67L - YAGEO): The YAGEO RT0805BRD072K67L offers tighter tolerance (±0.1%) with identical power rating and package specifications. This part is suitable for non-automotive applications or where AEC-Q200 qualification is not required.

Higher Power Alternative (5-2176092-4 - TE Connectivity): The TE Connectivity 5-2176092-4 provides increased power rating (0.25W versus 0.125W) with tighter tolerance (±0.1%) in the same 0805 package. This part is suitable for applications requiring higher power dissipation capacity. Note that this part does not carry AEC-Q200 automotive qualification.

All substitute parts maintain ROHS3 compliance, unlimited moisture sensitivity level (MSL 1), and identical operating temperature range (-55°C ~ 155°C).

Frequently Asked Questions (FAQ)

Q: Can the ERA-6AEB2671V (Panasonic) be used as a direct replacement for the RG2012P-2671-D-T5 (Susumu)?

A: Yes. The Panasonic ERA-6AEB2671V is a direct substitute. Both parts share identical resistance (2.67 kOhms), power rating (0.125W), package (0805), composition (thin film), temperature coefficient (±25ppm/°C), and operating temperature range (-55°C ~ 155°C). The Panasonic part features tighter tolerance (±0.1% versus ±0.5%) and maintains AEC-Q200 automotive qualification.

Q: What is the difference between the TE Connectivity 5-2176092-4 and the original Susumu part?

A: The TE Connectivity part provides higher power rating (0.25W versus 0.125W) and tighter tolerance (±0.1% versus ±0.5%). All other electrical and environmental specifications remain identical. The TE Connectivity part does not carry AEC-Q200 automotive qualification. The increased height (0.026" versus 0.020") must be verified for PCB layout compatibility.

Q: Are all substitute parts RoHS compliant?

A: Yes. All listed substitute parts (ERA-6AEB2671V, RT0805BRD072K67L, and 5-2176092-4) are ROHS3 compliant, matching the original RG2012P-2671-D-T5 specification.

Q: Which substitute part should be selected for automotive applications?

A: For automotive applications requiring AEC-Q200 qualification, select either the original RG2012P-2671-D-T5 (Susumu) or the ERA-6AEB2671V (Panasonic). Both parts carry AEC-Q200 certification. The Panasonic part offers improved tolerance (±0.1%).

Q: Do the substitute parts have the same package dimensions?

A: All parts use the 0805 (2012 Metric) package with identical length (0.079") and width (0.049"). Seated height varies: RG2012P-2671-D-T5 (0.020"), ERA-6AEB2671V (0.024"), RT0805BRD072K67L (0.024"), and 5-2176092-4 (0.026"). Verify PCB layout clearance for parts with increased height.

Q: What is the moisture sensitivity level for all parts?

A: All parts, including the original and all substitutes, have Moisture Sensitivity Level 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.

Q: Can the RT0805BRD072K67L (YAGEO) be used in automotive applications?

A: The YAGEO RT0805BRD072K67L does not carry AEC-Q200 automotive qualification. Use this part only in non-automotive applications or where automotive certification is not required.