RG2012P-2322-W-T1 Equivalent & Substitute Parts

Part Overview

The RG2012P-2322-W-T1 is a 23.2 kOhms ±0.05% thin film chip resistor in 0805 (2012 Metric) package rated for 0.125W (1/8W) power dissipation. This component features anti-sulfur coating and automotive AEC-Q200 qualification, suitable for high-reliability applications requiring precision resistance values and tight tolerance specifications.

The RG2012P-2322-W-T1 is classified as obsolete. Equivalent and substitute parts are available from the same manufacturer series to maintain design compatibility and performance requirements in active production environments.

Substiute Parts

RG2012P-2322-W-T1

SusumuIn Stock: 957RG2012P-2322-W-T1 Datasheet

Current PartRFQ

RG2012P-2322-W-T5

SusumuIn Stock: 790RG2012P-2322-W-T5 Datasheet

DirectRFQ

RG2012N-2322-W-T1

SusumuIn Stock: 815RG2012N-2322-W-T1 Datasheet

UpgradeRFQ

RG2012P-2322-B-T5

SusumuIn Stock: 5644RG2012P-2322-B-T5 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RG2012P-2322-W-T1 is determined by the following critical parameters:

Primary Substitution Criteria:

• Resistance value: 23.2 kOhms (exact match required)
• Package / Case: 0805 (2012 Metric) (exact match required)
• Power rating: 0.125W (1/8W) (exact match required)
• Composition: Thin Film (exact match required)
• Features: Anti-Sulfur, Automotive AEC-Q200 (exact match required)
• Operating temperature range: -55°C ~ 155°C (exact match required)
• RoHS compliance: ROHS3 Compliant (exact match required)

Secondary Substitution Parameters (Allowable Variation):

• Tolerance: ±0.05% (primary) to ±0.1% (acceptable for less stringent applications)
• Temperature coefficient: ±25ppm/°C (primary) to ±10ppm/°C (improved performance)
• Packaging format: Bulk to Tape & Reel (TR)
• Product status: Obsolete to Active

Substitute parts are grouped into two categories: direct equivalents (identical electrical and mechanical specifications) and upgrade alternatives (improved temperature coefficient performance).

Parameter Comparison

Engineering Selection Recommendations

RG2012P-2322-W-T5 (Direct Equivalent)

The RG2012P-2322-W-T5 is the primary direct substitute for the obsolete RG2012P-2322-W-T1. Both parts maintain identical electrical specifications: 23.2 kOhms resistance, ±0.05% tolerance, 0.125W power rating, and ±25ppm/°C temperature coefficient. The primary difference is packaging format (Tape & Reel versus bulk) and active product status. This part is suitable for direct replacement in designs requiring the original specifications without modification. Active inventory status ensures long-term availability.

RG2012N-2322-W-T1 (Upgrade Alternative)

The RG2012N-2322-W-T1 offers improved performance through a reduced temperature coefficient of ±10ppm/°C compared to the original ±25ppm/°C specification. All other electrical and mechanical parameters remain identical. This upgrade is applicable in designs where enhanced temperature stability is beneficial. The part maintains AEC-Q200 automotive qualification and ROHS3 compliance. Active product status supports production continuity.

RG2012P-2322-B-T5 (Tolerance Relaxation Alternative)

The RG2012P-2322-B-T5 maintains all specifications except tolerance, which is ±0.1% instead of ±0.05%. This part is suitable only for applications where the relaxed tolerance specification is acceptable. The wider tolerance may impact circuit performance in precision analog applications. Active inventory and product status provide availability assurance.

Frequently Asked Questions (FAQ)

Q: Can RG2012P-2322-W-T5 be used as a direct replacement for RG2012P-2322-W-T1?

A: Yes. Both parts share identical electrical specifications (23.2 kOhms, ±0.05% tolerance, 0.125W, ±25ppm/°C). The difference is packaging format (Tape & Reel versus bulk) and product status (Active versus Obsolete). Electrical performance and PCB footprint compatibility are equivalent.

Q: What is the difference between RG2012P-2322-W-T5 and RG2012N-2322-W-T1?

A: The primary difference is temperature coefficient: RG2012P-2322-W-T5 has ±25ppm/°C while RG2012N-2322-W-T1 has ±10ppm/°C. All other specifications are identical. The RG2012N variant provides superior temperature stability for applications requiring tighter performance across the -55°C to 155°C operating range.

Q: Is RG2012P-2322-B-T5 compatible with designs specified for RG2012P-2322-W-T1?

A: Compatibility depends on circuit tolerance requirements. RG2012P-2322-B-T5 has ±0.1% tolerance versus the original ±0.05%. For precision analog circuits, measurement instrumentation, or reference networks, the wider tolerance may introduce unacceptable error. For general-purpose applications, this part is compatible.

Q: Are all substitute parts AEC-Q200 qualified?

A: Yes. All listed substitute parts carry AEC-Q200 automotive qualification and anti-sulfur coating, matching the original part's reliability ratings.

Q: What is the significance of Tape & Reel packaging for these parts?

A: Tape & Reel (TR) packaging is standard for automated assembly processes. The RG2012P-2322-W-T5 and RG2012N-2322-W-T1 are supplied in TR format, which is compatible with pick-and-place equipment. The original RG2012P-2322-W-T1 bulk packaging may require manual handling or reeling for automated assembly.

Q: Do all substitute parts maintain ROHS3 compliance?

A: Yes. All substitute parts listed are ROHS3 compliant, matching the environmental compliance status of the original part.